Our Sedgwick crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Hancock County within days.
Written quote at no cost, one callback, no chasing afterwards.
You probably feel tired of stepping over that high porcelain ledge every single morning just to wash up. Because of this daily hassle, many homeowners decide it is time to upgrade their old-fashioned washing setups to something much safer and modern. We can help you swap that outdated basin for a walk-in stall that fits your lifestyle perfectly.
Indeed, making this change instantly opens up your room. This means you get a spacious area that feels less cramped. On top of that, you will save precious minutes every day because cleaning a flat basin floor is incredibly easy compared to scrubbing deep corners.
Honestly, you deserve a space that offers real peace and convenience. By requesting a free home estimate from us today, you can take the first step toward a beautiful remodel. We will visit your home to measure everything and help you choose the best layout for your daily routine.
Naturally, safety stands out as the biggest reason to make this smart switch. Since most household slips happen when people try to balance on one wet foot, removing that high barrier keeps you secure. Which means you can wash without worrying about losing your footing on slick surfaces.
Consequently, your daily routine becomes much more relaxing. Instead of dealing with a cramped setup, you enjoy a spacious enclosure designed for quick entry and exit. This lets you start your mornings with fresh energy and zero stress.
To give you a better idea of what to expect, we put together a quick comparison table below.
| Feature | Old High-Walled Tub | Modern Walk-In Stall |
|---|---|---|
| Entry Height | Usually 14 to 18 inches | Low threshold (often under 3 inches) |
| Maintenance | Hard-to-reach corners and grime | Easy-to-wipe flat panels |
| Space Feel | Cramped and bulky | Open, airy, and bright |
Besides the obvious safety benefits, this upgrade adds incredible value to your property. Buyers nowadays actively look for modern bathrooms with walk-in stalls rather than dusty old basins they will never use for soaking. Therefore, this project serves as a smart investment for your future.
First, you must decide on the type of walls you want. For example, high-quality acrylic panels look amazing and require almost no scrubbing. This material resists mold, which means you spend less time cleaning with harsh chemicals.
Alternatively, you might prefer solid surface options or even beautiful tile work. Although tile requires a bit more maintenance, it gives you a custom look that reflects your personal style. Regardless of your choice, we ensure a watertight fit that protects your subfloor from hidden leaks.
Actually, we can show you samples of these materials right in your own living room. When you request your free on-site estimate, we bring our catalog directly to you. This lets you touch the materials and see how they look under your own lights.
Now, let us talk about the hardware that makes your daily wash enjoyable. Installing a sliding bar with a handheld wand gives you incredible flexibility. This lets you direct the stream exactly where you need it, which makes washing hair or rinsing the walls very simple.
Furthermore, adding a built-in bench or a fold-down seat provides extra security. If you ever feel tired or unsteady, you can simply sit down and wash in absolute peace. This simple addition transforms your daily routine from a chore into a relaxing break.
Certainly, your safety remains our top priority throughout this design process. We install heavy-duty grab bars that blend seamlessly with your chosen metal finishes. This means you get extra support without sacrificing the stylish look of your new space.
Usually, your old basin uses a one-and-a-half-inch drain pipe. However, a modern walk-in setup works best with a two-inch drain to prevent water from pooling around your feet. Our team handles this plumbing adjustment quickly so your new system functions flawlessly.
Because we know the local building codes inside and out, we ensure everything meets the highest standards. You do not have to worry about permits or technical details. We take care of the paperwork and the heavy lifting so you can just enjoy the results.
Indeed, our professional installers treat your home with the utmost respect. We lay down protective cloths and clean up every speck of dust before we leave. This means you can start using your upgraded space almost immediately without any cleanup hassle.
Living in our lovely coastal community of 1,196 residents means you value hard work and honest service. We are proud to serve homeowners across the entire 04676 ZIP code area with top-tier craftsmanship. Since our local median household income is around sixty-eight thousand dollars, we know how important it is to get real value for your hard-earned money.
Whether you live in a historic farmhouse or a modern home near the water in Sedgwick, Maine, we tailor our services to fit your specific structure. We understand the unique challenges of older coastal plumbing systems. This local knowledge helps us avoid surprises and finish your project on time.
So, why wait any longer to improve your home? Our friendly team is ready to visit your house and provide a detailed, no-obligation quote. This lets you plan your budget accurately with zero pressure or hidden fees.
First, we begin with a friendly consultation in your home. We look at your current setup, discuss your goals, and measure the space. This lets us create a customized plan that fits your budget perfectly.
Next, we carefully remove your old heavy basin without damaging your walls or floors. We haul away the old materials so you do not have to worry about disposal. Then, we inspect the underlying wood for any hidden moisture damage and repair it on the spot.
Finally, we install your beautiful new low-barrier pan, waterproof walls, and chosen fixtures. We seal every joint with high-grade silicone to ensure a lifetime of leak-free performance. Once we finish, we walk you through the completed project to make sure you love every single detail.
Ultimately, life is too short to deal with a bathroom that does not meet your needs. You deserve a modern, safe, and easily accessible washing area that makes you feel independent. Let us help you turn that old, unused soaking basin into a stunning walk-in area.
So, what are you waiting for? Reach out to us today to schedule your free home assessment. We will help you design a space that brings peace, beauty, and safety back into your daily life.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Sedgwick repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Hancock County; the statewide picture lives on Maine; the wider region is the Northeast; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote