Anywhere in Maine: the tub comes out, the shower goes into the same alcove, and the price was on paper first.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of climbing over that high, slippery wall every single morning just to wash up. This common daily struggle actually causes a lot of slips and falls in our households. Fortunately, you can swap that outdated, deep basin for a modern, walk-in option that makes your routine much safer.
Our local team specializes in swapping out old, bulky soaking tubs for sleek, low-barrier walk-in stalls. This smart change instantly opens up your floor plan and gives you a much larger area to stand. By choosing this upgrade, you get rid of the moldy shower curtains and gain a beautiful glass enclosure instead.
If you want to make your daily routine much easier, we are ready to help. Our local crew travels right to your home to look at your layout and give you a free estimate. We love helping homeowners in the Pine Tree State get the modern, accessible bathrooms they deserve.
First of all, safety is the main reason most people decide to make this change. Stepping over a high porcelain ledge when your feet are wet is always a recipe for disaster. By installing a low-threshold base, you significantly reduce the risk of falling in your home.
Besides keeping you safe, this project actually makes your daily cleaning chore a whole lot easier. Old acrylic basins tend to collect soap scum and stubborn grime in hard-to-reach corners. Modern wall panels and solid-surface bases resist mold growth, which means you spend less time scrubbing on your hands and knees.
On top of those benefits, a modern setup looks absolutely beautiful and adds a touch of modern class. You will love how much larger your small bathroom feels without that massive block of cast iron taking up all the space. It is a fantastic way to maximize your square footage while adding real value to your property.
First, our crew arrives to protect your floors and carefully demo your old, outdated unit. We handle the heavy lifting, which means you do not have to worry about breaking your back hauling cast iron. This initial phase also lets us inspect the subfloor and the wall studs for any hidden water damage.
Next, we update the plumbing lines to match your new configuration. We install a high-flow drain and a pressure-balanced mixing valve so you get perfect water temperature every time. This step ensures that your new setup functions flawlessly without any annoying leaks behind your walls.
Finally, we secure the slip-resistant shower pan and install the gorgeous, waterproof wall surrounds. You can choose from various patterns that look like real stone, granite, or classic subway tile. After we seal everything with heavy-duty silicone, your beautiful new space is ready for use in just a couple of days.
| Project Phase | Key Actions We Take | Direct Benefit to You |
|---|---|---|
| Demolition | Remove old basin, inspect studs, fix water damage | Ensures a solid, mold-free foundation |
| Plumbing | Update drain location, install new mixing valve | Prevents leaks and improves water pressure |
| Surrounds | Install waterproof wall panels and slip-safe pan | Provides a beautiful, low-maintenance finish |
When you start planning, you will need to choose between acrylic panels and custom tile work. High-grade acrylic is incredibly popular because it is non-porous and resists chipping or cracking over time. This budget-friendly option keeps your project costs down while delivering a clean, seamless look.
Alternatively, custom tile offers unmatched customization and a premium feel. You can design intricate patterns and use natural stone to create a spa-like atmosphere in your home. However, keep in mind that tile requires regular grout sealing to prevent water from seeping behind the walls.
No matter which material you choose, we focus on durability and ease of maintenance. We always recommend adding built-in seating and sturdy grab bars for extra support. This attention to detail ensures that your new setup serves your family well for decades to come.
Living in this beautiful part of the country means dealing with unique home styles, from historic coastal capes to cozy rural cabins. Many older homes in this region feature tight hallways and tricky plumbing configurations that require expert hands. Our team knows how to navigate these local structural quirks without damaging your historic plaster walls.
According to census data, the local median household income is around $63,000, which means local homeowners appreciate smart, cost-effective renovations. Our service area covers various ZIP codes across the state, from busy coastal harbors to quiet inland towns. We understand the local climate and the importance of using materials that handle our freezing winters and humid summers.
Whether you live in a bustling city center or a quiet woodland retreat, we bring our expertise right to your doorstep. We take pride in serving this population of over 1.3 million resilient residents. You can trust us to deliver high-quality work that respects your budget and your home.
For many older adults, maintaining independence at home is a top priority. A high-threshold basin often becomes an insurmountable obstacle as mobility changes over time. By removing this barrier, you create a space where everyone in your family can wash up safely and independently.
This layout change also lets you easily add a comfortable bench seat inside the stall. This feature is a lifesaver for anyone who struggles to stand for long periods of time. Combined with a handheld spray wand, it turns your daily washing routine into a relaxing, stress-free experience.
Additionally, we can install low-profile thresholds that allow for easy wheelchair access if needed. This forward-thinking design choice ensures that your home remains fully functional for you throughout your golden years. It is a truly invaluable investment in your personal freedom and safety.
Typically, our experienced team can complete the entire transformation in just two to three days. This fast turnaround minimizes the disruption to your daily life and your household. We work efficiently to get your bathroom back in service as quickly as possible.
Actually, most modern homebuyers prefer a large walk-in stall over a dusty, unused soaking basin. As long as your home has at least one other full basin elsewhere, this project usually increases your market appeal. It makes your property stand out to buyers of all ages and abilities.
Absolutely, we offer a wide variety of built-in shelves, corner caddies, and soap dishes. You can place these accessories at any height to keep your shampoos and body washes within easy reach. This customization helps keep your space neat, tidy, and clutter-free.
If you are ready to say goodbye to your old, clunky tub, we are here to help you take the next step. Our friendly team is ready to visit your home and discuss all the design possibilities with you. We will measure your space, listen to your ideas, and provide a detailed, no-obligation quote.
Do not wait until a slip or fall forces you to make this necessary change under stressful circumstances. Taking action now allows you to design a space that fits your personal style perfectly. We make the entire process simple, transparent, and completely worry-free for you.
To get started, simply fill out our online form or send us a quick message to request your free estimate. We look forward to helping you transform your bathroom into a safer, more beautiful space. Let us show you why so many homeowners in Maine trust our team for their home upgrades.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote