Bathtub To Shower Conversion

Bathtub To Shower Conversion in Mountain Top, Pennsylvania (PA)

Our Mountain Top crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Luzerne County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
11,319
County
Luzerne County
State
Pennsylvania
Region
Northeast
Median income
$82,099
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Are you tired of stepping over a high wall just to wash off the daily grime? This complete upgrade guide shows how swapping your clunky basin for a modern walk-in stall saves space, boosts safety, and adds real value. Read on to see how easily our local crew can handle this change for you.

Ditching the old basin for a modern walk-in

Let us face the truth about your current washing situation. You probably have a giant, outdated piece of porcelain or acrylic taking up half your washroom, which you barely ever fill with warm water anyway. Most of us just do not have the time for long, soaking sessions anymore, do we? This means you are wasting precious square footage on an obstacle that is basically a glorified basin for a quick morning rinse.

Naturally, swapping that bulky tub for a sleek, low-profile basin makes perfect sense for a busy lifestyle. You get to reclaim your floor area and enjoy a much more open, airy vibe in your daily routine. On top of that, it instantly modernizes the entire room without requiring a full, expensive remodel of every single wall. Our team specializes in taking out those old cast iron or fiberglass monsters and sliding in a beautiful, watertight base that fits the exact same footprint.

Think about how much easier your mornings will be when you do not have to perform a balancing act on a slippery ledge. Which means you get peace of mind and a much faster routine every single day. We handle everything from the initial tear-out to the final seal, ensuring your subfloor stays completely dry and protected. If you want to see what is possible in your home, you can easily grab a free estimate from us today.

Why safety and easy access matter so much

Maybe you are thinking about the future, or perhaps you have older family members visiting your home. Stepping over a wet, curved edge that is nearly two feet high is a recipe for a nasty slip. By switching to a low-threshold entryway, you practically eliminate that tripping hazard. This simple change creates a beautiful, accessible space that welcomes everyone, regardless of their mobility levels.

Additionally, we can install gorgeous, heavy-duty grab bars and built-in bench seating that blend perfectly with your new design. These features do not have to look like a sterile hospital room, either. We offer stylish metal finishes like brushed bronze and matte black that look incredibly sharp while keeping you safe. It is all about combining utility with a feeling of high-end relaxation.

To help you compare your options, we put together a quick look at how these two setups stack up against each other:

Feature Old High-Walled Setup New Walk-In Setup
Step-in Height Typically 14 to 18 inches Usually 1 to 3 inches
Cleaning Effort High (scrubbing deep corners) Low (wipe-down surfaces)
Visual Space Cramped and bulky Open and bright

As you can see, the benefits of making the switch go far beyond just a fresh look. This upgrade is a smart investment in your home's daily usability and long-term safety.

The installation process broken down

Now, you might be worried about your home being turned into a messy construction zone for weeks on end. That is a very common fear, but our specialized process is designed to be incredibly fast and clean. Because we focus on retrofitting the existing footprint, we do not have to tear down your entire home to get the job done. Our local crew arrives fully prepared to protect your floors, capture the dust, and work efficiently.

First, we carefully remove the old fixture without damaging your surrounding drywall or plumbing. Then, we inspect the underlying wood to make sure there is no hidden water damage or rot from old leaks. If we find any issues, we repair them right then and there so you have a rock-solid foundation. After that, we install the new acrylic pan or custom tile base, hooking up the drain line perfectly.

Next, we install the waterproof wall panels or beautiful new tile surrounds, depending on your personal taste. We seal every single seam with high-grade silicone to guarantee a lifetime of leak-free performance. Finally, we mount your new fixtures, hang the glass doors, and clean up every speck of dust before we leave. You are left with a gorgeous, functional masterpiece that is ready to use in no time at all.

Customizing your new oasis

When it comes to the look of your new wash space, you have an incredible amount of freedom. You can choose from modern subway tile patterns, realistic stone-look panels, or clean, seamless acrylic walls. These modern materials are designed to resist mold and mildew, which means you will spend way less time scrubbing grout lines on your weekends.

On top of the walls, you can select the perfect glass enclosure to complete the look. Frameless glass doors offer an incredibly high-end, spacious feel that lets natural light flood the entire room. If you prefer a more traditional look, we can set up a beautiful curtain rod system that works perfectly with your decor. We work closely with you to design a setup that matches your budget and your style.

Local expertise right here in Luzerne County

Living in this beautiful part of Pennsylvania means dealing with older homes that often have unique plumbing challenges. Houses in the Mountain Top area, especially within the 18707 ZIP code, frequently feature older cast iron pipes or settled floors. With a local population of about 11,319 people and a healthy median household income of $82,099, homeowners here really value high-quality craftsmanship. We know exactly how to handle the specific architectural quirks found in these local neighborhoods.

Because we are local, we do not apply cookie-cutter solutions to your unique home. We understand how the local water pressure affects your fixture choices and how to properly insulate exterior walls against our freezing winters. This local knowledge ensures your new setup performs flawlessly year after year, no matter how cold it gets outside. Plus, we are always just a quick drive away if you ever need any follow-up support.

Working with us means you are supporting local technicians who care about their community. We take immense pride in leaving our neighbors with beautiful, durable homes they can enjoy for decades. Our reputation is built on honesty, hard work, and crystal-clear communication from start to finish. We never use high-pressure sales tactics, just honest advice and fair pricing.

Getting your project started today

If you are ready to stop struggling with your old setup, the next step is incredibly simple. You do not have to guess about costs or worry about hidden fees when you work with our team. We come right to your home, look at your existing plumbing, and give you a detailed, honest assessment. This completely free quote lets you make an informed decision without any financial obligation at all.

During our visit, we will bring samples, measure your space, and answer any questions you might have about the timeline or materials. We want you to feel completely confident in your choices before we ever turn a single wrench. Our goal is to make this home improvement project the easiest and most rewarding experience you have ever had. Contact us today to schedule your free estimate and take the first step toward a better, safer home.

Why the tub goes in Mountain Top

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Mountain Top

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Mountain Top

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Mountain Top

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Mountain Top

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Mountain Top repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Mountain Top

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Mountain Top in short

StandingIncorporated place
Population11,319
ZIP codes18707
Land area15.0 sq mi
Density754 per sq mi
Median income$82,099

For the bigger map: county seat pages start at Luzerne County; the statewide picture lives on Pennsylvania; the wider region is the Northeast; background reading sits on Wikipedia.

Bathrooms we convert around Mountain Top

Conversions booked across Pennsylvania

One three-day job stands between this bathroom and its best fixture.

Get my free quote