Our Hunter crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Salt Lake County within days.
Written quote at no cost, one callback, no chasing afterwards.
Do you ever stare at that giant porcelain tub and wish it would just disappear? Many folks living in the Salt Lake County area feel exactly the same way about their outdated bathroom fixtures.
Getting rid of that clunky basin is the best way to open up your room. You can transform a cramped corner into a sleek area that feels way more modern.
Moving forward, let us talk about how you can gain some serious floor space. That big tub takes up way more room than you probably realize right now.
When you switch to a walk-in unit, you instantly create a sense of openness. This change lets you navigate your morning routine with much better ease and flow.
Believe it or not, getting rid of a tub you never use is smart. It stops you from cleaning a surface that just collects dust and grime.
Choosing a low-profile base means you can step inside without tripping over high walls. This keeps your daily life simple and avoids those annoying muscle strains.
Additionally, upgrading your wet area is a great way to increase property appeal. Most buyers today prefer a clean and open design over a bulky tub.
Think about how much more light enters a room when you install glass doors. This bright look adds a sense of luxury that really pops in photos.
Even if you plan to stay put, you still win with this choice. You get to enjoy a fresh, updated look that makes every morning better.
Plus, you can add custom features like built-in benches or grab bars. These additions offer incredible utility while keeping the room feeling super stylish.
| Benefit | Feature |
| More space | Removing the basin |
| Better safety | Low entry threshold |
| Easy maintenance | Smooth glass panels |
| Modern look | Updated tile work |
Starting this project might seem intimidating at first, but it is actually quite standard. You need to pull out the old fixture and prepare the plumbing underneath.
Usually, this means adjusting the drain and checking the wall behind the tiles. Since you live in a place like Hunter, where people appreciate solid workmanship, quality matters.
Furthermore, picking the right tile or stone finish changes the whole vibe. You want something that holds up well against moisture over many years.
Selecting large format tiles can make a small room feel much larger. This design trick gives your walls a seamless look that is truly beautiful.
Next, you have to think about the hardware and the spray head setup. Modern fixtures offer great pressure and give you full control over temperature.
Installing a handheld spray head gives you extra versatility during your daily washing. It makes cleaning the entire enclosure much faster and keeps soap scum away.
You might even consider adding a niche for your soaps and shampoos. This keeps everything organized so your bottles do not sit on the floor.
In our neck of the woods, having a practical home is top priority. With a population of 132,434 nearby, everyone is busy and wants a efficient lifestyle.
Most people around here find that their old tubs are just big water wasters. Switching to a efficient spray setup saves money on your utility bills.
However, you should avoid trying this as a total DIY project yourself. Messing with plumbing behind a wall can lead to some expensive water damage.
Having a pro look at your specific setup ensures everything stays watertight. They know exactly how to seal the corners so no leaks ever happen.
Since the median household income here allows for smart home investments, why wait? You deserve a room that makes you feel good every single day.
You can request a free estimate to see exactly what is involved. This way, you know the price before you commit to any big changes.
Now, consider the style you want for your new walk-in area. Do you like a minimalist look with clear glass or something more private?
Frameless doors offer a clean aesthetic that really opens up the room. They eliminate heavy metal frames that collect soap and are hard to scrub.
After that, pick a base that fits your specific needs and size. Some prefer a tiled floor that matches the walls for a unified look.
Others like a pre-cast acrylic base because it is very easy to clean. Both options are great, but they offer different vibes for your space.
Finally, think about lighting and ventilation to finish the whole project off. Good lighting makes the space feel bright and airy during dark mornings.
A strong exhaust fan is essential to move steam out of the area. This prevents mold and keeps your paint job looking great for longer.
Ultimately, this process is about creating a spot that suits your life. You want something that provides high levels of satisfaction and keeps things organized.
If you are ready to stop dealing with that annoying tub, just ask. Getting a professional opinion helps you map out the best possible path.
Transitioning from a tub to a stand-up unit is a big step. You will wonder why you waited so long to make the switch.
Everything from the materials to the layout can be tailored to you. You are in control of how the final project turns out.
Since you live in the ZIP codes serving this vibrant community, help is near. You can easily reach out to get your free quote right now.
Do not let another month go by with a tub you hate. Contact a pro who understands the specific needs of the local housing market.
It is time to enjoy a room that feels spacious and well-lit. You can have that perfect shower experience you have been dreaming about lately.
Just imagine walking into a clean, modern area every single morning. That dream is totally reachable when you hire the right local help.
Go ahead and ask for your free estimate to get started. You will be glad you decided to invest in your own home.
Everything about your daily routine will improve once you make this change. It is simple, effective, and brings a lot of real value home.
Start planning your new layout and see how much potential exists here. You definitely deserve a space that is both functional and very attractive.
With the right people on the job, you avoid all the stress. They take care of the heavy lifting so you can just enjoy.
Make sure to ask questions about the timeline and the material quality. A good contractor will explain everything so you feel totally at ease.
Your home is your sanctuary, so treat it with the care required. Small changes like this one really go a long way indeed.
The process is fast when you know who to call for help. You could be enjoying your brand new walk-in unit very soon now.
Why settle for a bathroom that does not work for you anymore? Change it up and see how much better your life feels today.
Requesting a free estimate is the first step toward that goal. It costs you nothing to see what is possible for your home.
You will get a clear idea of the costs and the timeline. Then you can make a smart choice for your family and house.
Do not wait for a leak or a crack to force your hand. Be proactive and upgrade your space on your own terms right now.
You will love the newfound openness that this project brings to life. It truly transforms the energy of your entire house for good.
Find a local pro who knows the area and the building codes. That way you stay safe and avoid any weird permitting issues later.
Good luck with your renovation and enjoy the process of creating something. You are going to love the results of your hard work.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Hunter repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Salt Lake County; the statewide picture lives on Utah; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote