Our Holden crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Millard County within days.
Written quote at no cost, one callback, no chasing afterwards.
Many homeowners feel trapped by an old, high-walled basin that they no longer use for soaking. If you find yourself climbing over a steep ledge every single morning just to get washed, you are likely ready for a smart change. Replacing that bulky, outdated tub with a modern walk-in stall will instantly make your daily routine safer and far more convenient.
By making this simple switch, you can open up your layout and create a much larger bathing area. Our team loves helping folks transition their spaces into highly practical setups that fit their actual lives. If you want to see how this layout upgrade can fit into your budget, we are happy to visit your home and give you a free estimate.
Let us face the truth about how we use our bathrooms today. Very few adults actually have the spare time to sit and soak in a deep tub for hours. Instead, most of us just want a quick, refreshing wash before we head out the door to work or school. When you remove that unused basin, you gain precious floor space and a much cleaner look.
This home improvement project is especially great for anyone planning to stay in their home for years to come. Climbing over a slippery edge is a major slip hazard, especially as the years start sneaking up on us. Replacing that barrier with a low-profile entry pan keeps you safe and gives you peace of mind every time you step inside. On top of that, these modern setups are incredibly easy to scrub down since they do not have deep corners where grime can hide.
When you decide to make the change, you get to choose exactly how your new space looks and functions. You can opt for beautiful, low-maintenance acrylic walls that mimic the look of expensive stone. Alternatively, you might prefer solid composite materials that resist mold and mildew without needing harsh scrubbing. We can install handy features like built-in corner shelves, sturdy grab bars, and even a comfortable bench seat.
To give you a better idea of what to expect, we have put together a quick comparison of the two setups:
| Feature | Old High-Walled Basin | Modern Walk-In Stall |
|---|---|---|
| Step-In Height | Usually 14 to 18 inches high | Only 3 to 5 inches high |
| Cleaning Effort | Requires deep bending and scrubbing | Simple wipe-down with mild soap |
| Safety Level | High risk of slipping and tripping | Very secure with optional grab bars |
| Space Utilization | Feels cramped and blocks light | Opens up the room and feels airy |
As you can see, the benefits of modernizing your space go far beyond just looking nice. You actually get a room that works better for your body and your busy schedule. We can walk you through all these customizable options during our initial home visit.
You might be wondering how we actually pull off this transformation without turning your home into a total disaster zone. First, we carefully protect your flooring and hallways before we touch a single tool. After that, our crew removes the old porcelain or steel basin along with the surrounding wall tiles. We inspect the subfloor underneath to make sure there is no hidden water damage or rot.
Next, we update your plumbing lines to line up perfectly with the new center drain or side drain location. We then install a heavy-duty waterproof pan that prevents leaks from ever reaching your ceiling below. Finally, we install the new wall panels, secure your hardware, and seal everything with professional-grade silicone. This entire process is incredibly efficient, often taking just a couple of days from start to finish.
Once the base and walls are in place, you need to decide how you want to enclose the area. A thick glass sliding door offers a sleek look that reflects light and makes your bathroom feel twice as big. If you prefer a more budget-friendly or flexible option, a simple curtain rod works beautifully too. Whichever route you choose, we ensure the fit is absolutely watertight.
We also pay close attention to the small details, like making sure your new fixtures match your existing sink faucets. This cohesive look gives your entire bathroom a high-end feel without the cost of a full remodel. Our goal is to make the transition as smooth as possible so you can start enjoying your new space right away.
Living in a quiet, close-knit community in Millard County means you value honest work and dependable local service. We proudly serve homeowners in the 84636 ZIP code area, which is home to about 447 friendly residents. With a median household income of $51,667, we know that local families want high-quality home upgrades that do not break the bank. We make sure our services are affordable, transparent, and built to last for decades.
Because we know the local water quality and building codes in Holden, Utah, we use materials that stand up to hard water buildup. We do not believe in high-pressure sales tactics or hidden fees that surprise you at the end of the project. Instead, we focus on delivering top-tier craftsmanship that makes your neighbors jealous. We treat your home with the exact same respect we would show to our own families.
It is always tempting to try and tackle home projects yourself to save a few dollars. However, plumbing and waterproofing are two areas where a tiny mistake can cost you thousands of dollars down the road. A single slow leak behind a wall can rot your framing and cause toxic mold to grow. By hiring a professional crew, you get the assurance that every pipe connection is perfectly secure.
Our team has the specialized tools needed to cut through old cast iron, level uneven subfloors, and seal walls flawlessly. We carry full insurance and licensing, so you do not have to worry about a single thing during the installation. Let us handle the heavy lifting while you sit back and watch your dream bathroom come to life.
Are you ready to stop struggling with your old, awkward tub and step into a bright, open shower? We make it incredibly easy to take that very first step toward a safer and more beautiful bathroom. All you have to do is reach out to us, and we will schedule a convenient time to visit your home. We will look at your current setup, listen to your ideas, and give you a detailed quote completely free of charge.
There is absolutely no obligation to buy when you request your free estimate from us. We believe in letting our friendly service and fair pricing speak for themselves. Reach out to our local team today, and let us help you transform your daily routine for the better!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Holden repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Millard County; the statewide picture lives on Utah; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote