Our Clearfield crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Davis County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high porcelain ledge every single morning. That old, deep basin takes up way too much space in your washroom and you probably never even fill it up with water anymore. Many people in our local community are choosing to swap that clunky old tub for a sleek, walk-in washing space instead. This smart update makes your daily routine much safer and gives your bathroom a modern look.
If you are ready to make this change, our team comes directly to your home to look at your setup. We want to help you figure out the best design for your budget and your daily needs. You can easily request a free estimate from us today to get this exciting project started.
First of all, safety is a huge deal for everyone. Shuffling your feet over a wet, slippery barrier while balancing on one leg is a recipe for a bad fall. By removing that tall obstacle, you create a low-profile entry point that keeps you safe and secure. This simple change lets you breathe easier every time you step in to get clean.
Besides keeping you safe, you will love how much larger your room feels. Those bulky old basins eat up precious square footage and make small rooms feel like tiny closets. Replacing them with a modern glass enclosure opens up the sightlines and lets the light bounce around. Your whole room suddenly feels bright and spacious.
On top of that, nobody actually enjoys scrubbing stubborn grime out of deep corners. Newer wall panels and bases use non-porous materials that resist mold and soap scum. This means you will spend way less time on your knees scrubbing and more time enjoying your day. Here is a quick look at how these two options compare for your home:
| Feature | Old High-Wall Tub | New Walk-In Setup |
|---|---|---|
| Step-In Height | Usually 14 to 18 inches | Only 1 to 5 inches |
| Cleaning Effort | High, lots of bending | Very low, simple wipe-down |
| Floor Space | Feels cramped and bulky | Creates an open, airy feel |
Now, you get to make some fun choices about how your new space looks. You can select beautiful wall surrounds that look exactly like expensive stone or modern subway tile. These durable panels do not have grout lines, which prevents water from leaking into your walls. This protects your home from hidden water damage and expensive repairs down the road.
Additionally, you can customize your new space with helpful accessories. We can install built-in seating, sturdy grab bars, and recessed shelves for your shampoo bottles. These features keep your products organized and within arm's reach. You will feel like you are staying in a fancy hotel every single day.
To make things even better, you can choose from various sliding or hinged glass doors. If you prefer a more minimalist style, you can even go completely doorless with a modern walk-in shield. This flexibility allows us to build a space that fits your personal taste perfectly.
When we design your new space, the showerhead matters a lot. You might want a rain-style fixture that pours water from directly overhead. Or maybe a handheld sprayer works better for washing your pets and rinsing down the walls.
Furthermore, we always recommend high-quality pressure-balancing valves. These smart valves prevent sudden temperature changes when someone else flushes a toilet in your house. That means no more freezing surprises or scalding hot shocks while you wash.
Because we are removing a large reservoir, we must ensure your plumbing drains water quickly. Our crew evaluates your existing pipes to make sure they can handle the flow. Sometimes we widen the drain opening to prevent any pooling on your new floor. This attention to detail keeps your bathroom dry and safe.
Naturally, you might worry about having your home turned into a dusty construction zone for weeks. Fortunately, our crew works incredibly fast and keeps the mess to an absolute minimum. We start by carefully removing your old cast iron or steel tub without damaging your walls.
After that, we inspect the subfloor underneath to check for any hidden rot or water damage. If we find soft wood, we repair it immediately so your new base has a rock-solid foundation. We never just cover up old problems because we want your new setup to last for decades.
Finally, we run the new plumbing lines and install your chosen base and wall panels. We seal every single joint with premium, waterproof silicone to guarantee a leak-free fit. Most of our projects wrap up in just a couple of days, so you do not have to live without a bathroom for long.
If you live in Clearfield, Utah, you know our neighborhood has a great mix of cozy older homes and growing families. With a local population of 31,016, homeowners here in Davis County are always looking for ways to boost their property value. Since the median household income sits around $56,213, making smart, cost-effective upgrades to your property is highly beneficial. Whether your home is in ZIP code 84015, 84016, or 84089, upgrading your bathroom is one of the best ways to build equity.
When you decide to sell your home in the future, buyers will love seeing a modern walk-in washroom. Many young families and retirees prefer these accessible setups over outdated fixtures. This means your renovation pays off now by making your life easier, and it pays off later if you choose to move.
Ready to take the next step toward a beautiful, accessible bathroom? We make the entire process incredibly easy and stress-free for you. Our friendly team is ready to visit your home, look at your space, and give you honest advice.
Which means you get a detailed, accurate price quote without any pressure or obligation. We believe in upfront pricing and clear communication so you know exactly what to expect. Grab your phone or fill out our online form to request your free estimate today!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Clearfield repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Davis County; the statewide picture lives on Utah; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote