Our Camas crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Sanders County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, dangerous porcelain ledge every single morning just to wash off. This daily hurdle can turn your morning routine into a stressful balancing act, which is exactly why a modern bathroom update makes so much sense. By swapping that old, unused deep basin for a sleek, walk-in washing space, you instantly create a safer and much more open environment.
Think about how much space you actually waste with an old basin that you never even fill up with water anymore. Removing that clunky barrier lets you reclaim your floor plan and gives your entire bathroom a sudden burst of modern style. Our local team specializes in this exact transformation, bringing fresh life to outdated homes with minimal hassle.
If you want to make your daily routine safer and far more stylish, we can help you get started today. You can request a free estimate from us to see how easily this change can happen in your home. Our friendly local team will visit your property, look at your current setup, and give you a clear plan without any pressure.
Stepping into a high-sided basin is actually one of the most common ways people slip and get hurt at home. By eliminating that tall barrier, you drastically lower the risk of trips and falls for everyone in your household. This simple change brings peace of mind, especially if you plan to stay in your home for years to come.
Cleaning a giant, dusty basin is another chore that nobody actually enjoys doing on their weekend. New, low-profile washing spaces use modern, non-porous materials that resist mold growth and wipe clean with very little effort. This means you will spend way less time scrubbing on your knees with harsh chemicals.
Furthermore, this smart home improvement project can significantly boost the overall market value of your property. Most modern buyers actually prefer a spacious, easily accessible stall over an old-fashioned basin they will never use. It is a win-win upgrade that offers daily convenience now and a great selling point later.
Our process begins with a careful evaluation of your existing plumbing lines to ensure everything drains perfectly. Since we work in Sanders County, we understand the specific plumbing quirks of homes in this beautiful region. We make sure your new drain is sized correctly so you never have to stand in pooled water.
Next, we carefully tear out the old cast iron or acrylic unit without damaging the surrounding walls or floor structure. This part of the job requires real muscle and specialized tools to keep your home clean and undamaged. We haul away all the heavy debris so you do not have to worry about disposal.
Once the old unit is gone, we install a modern pan, waterproof backer boards, and beautiful new wall panels. This multi-layered waterproofing system guarantees that no moisture will ever leak into your subfloor or wall cavities. Finally, we hook up your new fixtures so you can enjoy your first splash of water.
To help you compare your options, we put together a simple table showing the main differences between these two setups:
| Feature | Old High-Sided Basin | Modern Walk-In Stall |
|---|---|---|
| Step-In Height | Usually 14 to 18 inches | Usually 1 to 3 inches |
| Required Effort to Clean | High (lots of bending and scrubbing) | Low (simple wipe down) |
| Risk of Slipping | Moderate to High | Very Low |
| Visual Space Impact | Makes room look smaller | Creates an open, airy feeling |
Acrylic wall systems are incredibly popular because they offer a seamless look that is exceptionally easy to maintain. These durable panels come in many different colors and patterns, including realistic stone designs that look highly luxurious. You get the beauty of natural stone without any of the annoying grout lines to scrub.
On the other hand, classic ceramic or porcelain tile allows for complete customization of your new stall. If you love unique patterns and do not mind a little extra maintenance, tile is a fantastic option for your home. We can install handy recessed niches for your shampoo bottles and soaps to keep things organized.
No matter which material you choose, we focus on installing slip-resistant floor pans to keep you safe. These textured surfaces provide excellent traction even when your feet are soapy and wet. Safety and style go hand-in-hand when you design your new space with our team.
Adding a built-in bench or a fold-down seat can turn your new stall into a highly relaxing oasis. This feature is perfect for anyone who prefers to sit down while washing or needs a little extra stability. It adds a wonderful layer of coziness and utility to your daily routine.
We can also strategically install sturdy grab bars that blend beautifully with your chosen metal fixtures. Modern grab bars do not look like cold hospital hardware anymore; they look like stylish, high-end accessories. They give you extra leverage and confidence every single time you step inside.
Adjustable handheld showerheads are another fantastic addition that makes rinsing off incredibly easy and convenient. This setup lets you direct the water exactly where you need it, which also makes cleaning the stall walls a breeze. You get total control over your washing experience with these simple upgrades.
We are proud to serve the lovely community of Camas, Montana, where neighborly trust and quality craftsmanship still matter. With a tiny, close-knit population of around 79 residents, we treat every single customer like our actual neighbor. Our crew respects your home, keeps a clean workspace, and finishes the job on time.
We know that median household income is an important factor when planning any major home renovation project. That is why we offer fair, transparent pricing and different options to fit your specific budget. We believe everyone deserves a safe and beautiful home without facing hidden fees or surprise costs.
Whether your home sits in the local ZIP code or nearby rural areas, we are ready to drive out to you. We bring all our samples and expertise right to your door so you can make decisions in your own space. Let us handle the hard work while you sit back and enjoy the transformation.
Taking the first step toward your dream bathroom is much easier than you might think. All you have to do is reach out to us and request your free estimate today. We will schedule a convenient time to visit your home, measure your space, and discuss your goals.
During our visit, we will answer all your questions about layouts, materials, plumbing, and project timelines. We believe in honest communication, so we will tell you exactly what to expect from start to finish. There is absolutely no obligation to buy, just helpful information to assist you.
Stop struggling with that old, awkward basin and start enjoying a safer, more open washing experience. Our dedicated team is excited to help you transform your bathroom into a space you truly love. Contact us today to secure your free consultation and take the first step toward a better home!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Camas repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Sanders County; the statewide picture lives on Montana; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote