Our Polson crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Lake County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of climbing over that high, slippery wall every single morning just to wash off. Many homeowners dream of a safer, open setup that fits their daily routine much better than an outdated tub. Making this smart upgrade transforms your daily routine into a quick, refreshing ritual.
Fortunately, our dedicated local team specializes in swapping out those clunky, unused basins for sleek, spacious walk-in stalls. You will finally get a gorgeous setup that matches your lifestyle and makes your daily routine a breeze. We help you wave goodbye to stubbed toes and hello to easy access.
By requesting a free estimate today, you can start planning a gorgeous remodel that breathes new life into your home. This simple change instantly boosts your property value while saving you from future slips and falls. Let us take a closer look at how this smart swap changes everything for your household.
Think about how often you actually take a full soak these days. If you are like most folks in our beautiful lakeside community, that dusty old basin just sits there collecting dust and soap scum. Swapping it for a modern walk-in option gives you back your valuable floor space.
This clever upgrade maximizes your layout by utilizing the exact footprint of your existing fixture. Which means you get a much larger showering area without having to tear down your bathroom walls or move major plumbing lines. It is a brilliant way to gain breathing room where you need it most.
On top of that, cleaning a flat, seamless wall system is ten times easier than scrubbing grime out of old porcelain curves. You will spend far less time on your knees with harsh chemicals and more time enjoying your weekends. That benefit alone makes the transition worth every single penny.
To help you compare your options, we put together a handy overview of how these two setups match up:
| Feature | Your Old Basin Setup | Our Walk-In Custom Replacement |
|---|---|---|
| Entry Height | High wall to climb over (15-20 inches) | Low-profile threshold (under 3 inches) |
| Safety Level | High slip hazard when wet | Slip-resistant floors and built-in grab bars |
| Maintenance | Hard-to-reach corners and dirty grout | Smooth, non-porous walls that resist mold |
| Space Utilization | Cramped feeling with high walls | Open, airy design with glass enclosures |
When you decide to modernize your bathroom, you get to choose from a massive variety of gorgeous materials and colors. Whether you prefer a classic subway tile look or a sleek modern slate pattern, we have you covered. Your new setup will reflect your personal taste perfectly while offering top-tier utility.
Besides the beautiful walls, you can select custom fixtures that deliver a spa-like experience right in your own home. Imagine a warm rainfall showerhead soothing your shoulders after a long day of work or play. This level of personalized coziness turns a mundane chore into the best part of your morning.
Furthermore, we can install handy built-in seating and sturdy safety bars that blend in beautifully with your design. These smart additions provide peace of mind for family members of all ages without sacrificing the style of your room. You get a space that is both highly functional and incredibly beautiful.
Nobody likes tripping over shampoo bottles and soap bars cluttering up the corners of their washing area. That is why we offer built-in recessed niches and corner shelves that keep your products neat and tidy. This extra organization keeps your space looking pristine and organized every single day.
By planning these small details with our friendly team, you ensure everything has its proper place. You will love the clean lines of a clutter-free environment every time you step inside. It makes your entire bathroom feel twice as big as it used to be.
Another fantastic way to elevate your project is by selecting the right glass door or panel system. Frameless glass options allow natural light to flow freely through the room, making the entire space feel bright and welcoming. This choice creates a high-end look that will make your neighbors jealous.
If you prefer more privacy, we also offer beautiful frosted or textured glass styles that look amazing. Our durable hardware options come in matte black, brushed nickel, or classic chrome to match your existing faucets. Every single detail works together to create a cohesive, stunning look.
You might worry that a major remodel will turn your home into a dusty, chaotic construction zone for weeks on end. However, our experienced local crew respects your home and works quickly to minimize any disruption to your life. We pride ourselves on clean, efficient work that gets the job done right the first time.
Since we are working right here in Lake County, we understand the local building styles and plumbing quirks of our area. Our skilled installers handle all the heavy lifting, from carefully removing your heavy old cast-iron basin to sealing the new pan. We ensure a perfect, watertight fit that protects your home from costly water damage.
Actually, most of our custom installations take just a couple of days to complete from start to finish. This rapid turnaround means you will not have to go without your primary bathroom for very long at all. We clean up every speck of dust before we leave, so your new space is ready to use immediately.
Water leaks can cause massive headaches and expensive structural damage if your installer cuts corners during the process. That is why we use state-of-the-art waterproofing membranes behind every wall panel we install. This extra layer of protection keeps moisture where it belongs and prevents mold growth behind the scenes.
This professional approach gives you ultimate peace of mind, knowing your investment is built to last for decades. You can wash away your worries, knowing your subfloor stays completely dry and safe underneath. We never compromise on the hidden quality of our craftsmanship.
Let us talk about the financial side of things, because upgrading your home is a big decision for any family. With a local median household income of $36,272, we know that spending your hard-earned money wisely is a top priority. You get one clear written price for your own situation, with no obligation.
Upgrading your washing area is actually one of the smartest investments you can make to increase your home equity. Potential buyers in the 59860 area often look for modern, accessible bathrooms when shopping for a new place. You will enjoy the daily benefits now, while knowing you are building long-term value for the future.
Moreover, preventing a single slip or fall can save your family from astronomical medical bills and stressful recovery times. Investing in a low-threshold entryway is a proactive step to protect your independence as you grow older. It is a gift of safety and daily convenience that you deserve to give yourself.
We love serving our wonderful community of 4,843 residents here in beautiful Polson, Montana, and we treat every customer like a close neighbor. Our local roots mean we care deeply about the quality of our work and the satisfaction of our clients. We want to help you create a home you truly love coming back to.
If you are ready to explore the possibilities for your bathroom, we make the first step incredibly easy and stress-free. We will come out to your property, look at your existing setup, and listen to your design ideas. Then, we will provide a completely free, no-obligation quote tailored to your specific budget and goals.
There is absolutely no pressure or tricky sales tactics when you work with our down-to-earth, honest team. We simply want to give you the honest information you need to make the best decision for your household. Contact us today to schedule your free estimate and take the first step toward your dream bathroom!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Polson repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Lake County; the statewide picture lives on Montana; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote