Our Bowie crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Prince George's County within days.
Written quote at no cost, one callback, no chasing afterwards.
Are you tired of climbing over a high wall just to wash off after a long day at work? Transforming your outdated basin area into a sleek walk-in stall in Bowie, Maryland, is the best move for your home value.
This local city in Prince George's County has many homes built a few decades back that still rely on heavy, clunky tubs. Getting rid of that giant porcelain eyesore gives you way more room to move around while you shower.
Think about how much space that old tub takes up in your primary bathroom. Removing it opens up your floor plan significantly, which makes your entire room feel much larger and brighter.
Since the median household income in this area sits right around $112,444, homeowners here often look for ways to upgrade their property without doing a full demolition. This specific project focuses on the wet zone, saving you money compared to a total renovation.
Stepping into a high-sided unit creates a real trip hazard, especially for older folks or anyone with knee issues. Installing a low-threshold basin lets you walk straight inside without lifting your feet high off the tile.
Having a stable floor surface underneath your feet provides a sense of relaxation that you just cannot get with a slippery tub base. You will love how much safer you feel during your morning routine every single day.
Removing a bulky tub instantly makes your bathroom look more modern and refreshed. You get to choose beautiful glass doors that let light flow through the entire room.
This change brings a high level of ease to your morning, allowing you to enjoy your shower without feeling squeezed. It adds a touch of pure luxury to your home, which is something every homeowner wants to achieve.
Most people assume this job takes weeks to finish, but that is usually not the case at all. Our team handles the demolition and the new install efficiently to minimize disruption to your home life.
We start by removing the existing fixture and checking the wall cavity for any hidden moisture damage. Finding these issues early prevents bigger problems later, ensuring your new setup lasts for many years to come.
First, we carefully protect your floors and vanity to keep your home clean while we work. Next, we replace the plumbing valves to match your new high-pressure fixtures perfectly.
Once the framing is ready, we install moisture-resistant backer board to keep your walls dry. Finally, we apply high-quality waterproofing membrane, which is the most critical step for a long-lasting bathroom upgrade.
You can pick from a huge variety of subway tiles, natural stone, or easy-clean acrylic wall panels. These choices let you customize the look to match your existing vanity or floor tiles perfectly.
Adding a built-in niche or a corner shelf keeps your soap and shampoo off the floor. This organization makes your daily cleaning routine much faster and more enjoyable for you.
Serving residents in ZIP codes like 20715, 20716, 20717, and 20718 means we know exactly what local homes need. Our team understands the quirks of houses built in this region and how to work within those parameters.
With a population of 58,368 people, this city deserves contractors who treat every home like their own. We prioritize quality work over speed because your satisfaction is what keeps our business growing strong.
You might wonder how much this project costs before you commit to anything. We provide a completely free estimate so you know exactly what the investment looks like upfront.
There is never any pressure to decide on the spot, as we want you to feel confident. Simply reach out to us and we will come take a look at your current setup.
Many folks worry that removing their only tub will hurt their home resale value. Actually, modern buyers in the current market often prefer a large, beautiful stall over a tub they never use.
Table 1: Comparing the tub versus the stall
| Feature | Old Style Tub | New Walk-in Stall | |
|---|---|---|---|
| Ease of Entry | Difficult and high | Low threshold and safe | |
| Daily Utility | Good for soaking | Best for quick washing | |
| Visual Impact | Clunky and heavy | Clean and open | |
| Maintenance | High effort | Very simple |
One of the best benefits of this upgrade is how much time you save on cleaning. Without those deep, curved walls, you do not have to scrub hard to reach every corner.
Most modern surfaces feature antimicrobial properties that resist mold and mildew growth. This means you spend less time scrubbing and more time relaxing in your upgraded space.
Selecting the right fixtures is the final step in creating a space that feels personal. A rain-style showerhead gives you a spa-like feeling every time you step under the water.
Adding a handheld wand attachment makes rinsing down the walls or washing your pets much easier. These small additions provide huge benefits to your daily routine that you will notice right away.
You might be tempted to handle this as a weekend DIY project, but plumbing can get tricky. One small leak inside your wall leads to expensive damage that costs far more than our labor.
Our crew ensures every pipe connection is sealed tight and every seam is caulked perfectly. You get the peace of mind knowing the job is done right the first time.
Are you ready to see how much better your bathroom could look with a fresh start? Do not wait for a small leak to force your hand when you can upgrade now.
Getting a free quote is the fastest way to get your project on the schedule. Contact us today and let us help you build the bathroom you have always wanted.
Improving your home is one of the smartest ways to enjoy your living space more every day. A quick change to your bathing area can completely transform how you feel in the morning.
We are excited to help you navigate this transition and provide the quality craftsmanship you expect. Your dream bathroom is closer than you think, so reach out whenever you are ready.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Bowie repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Prince George's County; the statewide picture lives on Maryland; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote