Our Beaverton crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Washington County within days.
Written quote at no cost, one callback, no chasing afterwards.
Do you hate climbing into that tall porcelain basin every single morning just to wash your hair? Well, upgrading your washing space makes your daily routine much safer and way more fun.
Truthfully, ditching that old giant tub gives you a fantastic way to modernize your entire house without moving away. Meanwhile, local folks living in Washington County often find that trading their rusty basin frees up lots of floor space.
Actually, homeowners residing in ZIP codes 97003, 97005, 97006, and 97007 deal with dated bathrooms all the time. Consequently, replacing these bulky fixtures upgrades your property value and stops those annoying leaks before they start.
Many residents around the local area struggle with stepping over high walls just to get clean. Instead, putting in a walk-in basin lets you shower safely without straining your lower back.
Think about how nice it feels to just walk right into your washing area without any obstacles. Furthermore, modern acrylic bases provide amazing traction that keeps you from slipping on soapy tiles.
With roughly 97,012 people calling this region home, finding reliable contractors can feel pretty overwhelming. Naturally, families earning around the median household income of $68,586 want reliable upgrades that will actually last.
By investing in a slick wall enclosure, you stop water from rotting your subfloor during every shower. Therefore, you save hundreds of dollars in hidden plumbing repairs down the road.
Before any demolition begins, you need a solid plan for your brand-new enclosure. First off, measuring the exact dimensions ensures your new glass panels fit snugly against the studs.
After that, picking out the right fixtures gives your bathroom a gorgeous style upgrade. Plus, choosing matte black hardware matches almost any color scheme you already have painted on the walls.
| Project Step | What Happens | Main Benefit |
|---|---|---|
| Demo | Old tub gets ripped out | Clears the workspace |
| Plumbing | Valves get adjusted | Better water pressure |
| Install | New base goes in | Prevents nasty leaks |
Most people forget about checking their water pressure before putting in a fancy rainfall showerhead. Fortunately, your local contractor tests all these lines so you get maximum spray power every single day.
Besides that, adding built-in soap niches keeps your shampoo bottles off the floor and organized. This clever design trick lets you keep your cleaning supplies right where you need them.
Water damage sneaks up behind drywall and causes nasty mold problems if you use cheap materials. Specifically, thick solid-surface panels keep moisture locked out of your wall cavities permanently.
Unlike regular tile grout that stains over time, smooth acrylic panels wipe clean with zero effort. Because of this feature, you spend less time scrubbing and more time relaxing in your upgraded space.
Starting a home improvement project can disrupt your daily routine if you do not know what is coming. Typically, professional crews show up early in the morning to protect your hallway floors with heavy drop cloths.
Once the old porcelain gets hauled away, carpenters inspect the wooden subfloor for any hidden rot. This crucial inspection lets you catch structural issues early before they turn into expensive nightmares.
During the second day, your brand-new shower pan gets leveled and secured with industrial adhesive. Next comes the plumbing adjustments that connect your new drain to the existing house waste pipes.
Some brave souls try to tackle bathroom plumbing upgrades over the weekend without any prior experience. Unfortunately, a slightly crooked drain pipe causes slow pooling and ruins your brand-new flooring.
Instead of risking a massive indoor flood, hiring a trained professional saves you from costly headaches. On top of that, licensed workers bring specialized tools that cut through tough cast iron pipes in seconds.
Working with local experts also guarantees your new setup meets all regional building codes without stress. That way, you never have to worry about failed inspections when you decide to sell your house.
Remodeling your washing area represents a major financial decision for any growing family in Oregon. Naturally, looking closely at your budget helps you choose features that provide the best long-term value.
While custom glass doors cost more than basic vinyl curtains, they make small rooms look much bigger. Consequently, this visual trick brings a sense of modern luxury to your master suite.
Financing options also make these big projects much easier to handle without draining your savings account. By spreading payments over time, you enjoy your new shower today while managing your monthly bills comfortably.
Old plastic tubs make homes look dated and often turn off potential buyers during open houses. Conversely, a sleek glass enclosure gives your listing an instant edge in a competitive market.
Real estate agents constantly report that updated bathrooms recover a huge chunk of their initial cost at resale. Therefore, your renovation essentially pays for itself over the years you live there.
Plus, energy-efficient showerheads reduce your monthly water bill while still delivering a powerful rinse. This smart update lowers your utility costs and helps conserve precious natural resources right in your neighborhood.
Stop putting up with that cracked and stained basin every time you need to get clean. Instead, reach out to local professionals who understand the specific architectural quirks of homes in this region.
Getting expert eyes on your layout costs you absolutely nothing and gives you a clear project timeline. Furthermore, a professional estimate details every single expense so you never face surprise charges halfway through.
Your refreshed washing space sits just a quick message away from becoming your favorite room in the house. Request your free quote right now and start planning the ultimate bathroom upgrade for your family.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Beaverton repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Washington County; the statewide picture lives on Oregon; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote