Our Twin Bridges crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Madison County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of climbing over that high porcelain barrier every single morning just to wash off the sleep. Many homes in our beautiful corner of Madison County still feature those deep, outdated basins that feel more like a tripping hazard than a sanctuary. By swapping that bulky basin for a sleek, low-profile basin-free setup, you instantly reclaim your bathroom space and make your daily routine much safer.
This simple remodel completely changes how you experience your home. Since our local daily lives involve dealing with chilly winters and dusty summers, having an easy-to-access wash area is a game changer. We can visit your property to evaluate your current setup and provide a detailed, completely free project assessment.
Making this upgrade also increases the overall value of your property. Buyers today actively look for modern, open-concept washrooms rather than dusty old soaking basins. Getting rid of the old unit lets you enjoy a brighter, more spacious room right now.
Think about the last time you actually took a full bath. Most of us just do not have the time for a long soak, which means that big acrylic mountain in your bathroom is just gathering dust and soap scum. Swapping it out for a beautiful glass-enclosed step-in area saves you precious minutes every single morning.
This layout change also makes cleaning your washroom incredibly easy. Old grouted tile edges around deep basins love to collect nasty black mold and stubborn hard water stains. Our modern solid-surface wall panels resist grime, which means you spend less time scrubbing on your knees.
Safety stands out as another massive reason to update your layout. Slipping while stepping over a high, wet ledge is a common worry for people of all ages. Removing that barrier gives you peace of mind and keeps you independent in your own home for years to come.
| Project Stage | What We Do | Your Direct Benefit |
|---|---|---|
| The Tear-Out | We carefully extract the old iron or acrylic basin and inspect the subfloor. | You get a fresh, mold-free foundation with zero hidden water damage. |
| Plumbing Prep | Our team updates your drain lines and installs modern mixing valves. | You enjoy much stronger water pressure and reliable temperature control. |
| Wall & Base Install | We secure the new slip-resistant floor piece and waterproof wall panels. | You receive a leak-proof system that looks beautiful and is easy to clean. |
Since every home has its own unique plumbing quirks, we always start with a thorough inspection. We look behind the drywall to make sure your pipes are in great shape before we install anything new. This careful planning prevents nasty surprises down the road.
After we clear out the old unit, we level the subfloor to ensure your new low-threshold base sits perfectly flat. This step is crucial because it ensures that water flows directly into the drain instead of pooling in the corners. You end up with a highly functional space that works perfectly every single time.
Finally, we install your choice of beautiful wall surrounds and modern fixtures. We can add built-in seating, handy grab bars, or recessed shampoo niches to match your lifestyle. This custom approach ensures your new setup fits your daily routine like a glove.
You can choose from a wide variety of finishes and colors to match your personal style. Whether you prefer a rustic stone look or a clean, modern white subway tile pattern, we have options that will make you smile. This custom touch turns your daily wash into a luxurious, spa-like escape.
Adding high-quality fixtures like rainfall showerheads or hand-held sprayers makes your daily routine much more pleasant. These features let you direct the water exactly where you need it, which is perfect for washing pets or cleaning the walls. You gain total control over your washing experience.
We also pay close attention to safety features like slip-resistant flooring textures and heavy-duty grab bars. These additions do not have to look clinical or boring anymore. We offer stylish, modern hardware that blends seamlessly with your decor while keeping you safe.
Many folks worry that a major bathroom upgrade will leave them without a washroom for weeks on end. Fortunately, our experienced team has refined this specific process down to a science. We can often complete the entire transformation in just a few days, minimizing the disruption to your household.
Living in a quiet community like Twin Bridges, Montana, means you value honest, straightforward service without any hidden fees. With a local median household income of $37,604, we know how important it is to keep projects affordable and transparent. We work closely with you to find high-quality materials that fit comfortably within your budget.
Investing in your home is a big decision, which is why we provide detailed, itemized estimates before any work begins. Our free consultations help you understand your options without any high-pressure sales tactics. You get all the facts you need to make the best choice for your family.
Working with a local team means you get personalized attention from people who actually care about our community. We understand the specific plumbing challenges common to older homes in the 59754 ZIP code area. This local knowledge helps us avoid common mistakes that out-of-town companies might miss.
Our small-town population of 305 people means our reputation is everything to us. We treat your home with the utmost respect, keeping our workspace clean and tidy from start to finish. You can trust us to deliver exceptional craftsmanship that stands the test of time.
We are fully licensed and insured, giving you complete peace of mind throughout the entire renovation. If you are ready to upgrade your home, reach out to us today to schedule your free, no-obligation estimate. Let us help you design a beautiful, safe, and modern space that you will love using every single day.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Twin Bridges repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Madison County; the statewide picture lives on Montana; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote