Our Tullahoma crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Coffee County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of tripping over that high porcelain ledge every single morning. This common frustration vanishes when you swap that dusty, deep basin for a sleek, walk-in design with low-threshold access. By making this smart change, you instantly create a safer space and open up your entire layout.
Naturally, your daily routine deserves a major upgrade. Dropping the old basin in favor of a spacious walk-in stall brings unparalleled convenience to your morning. On top of that, you will spend way less time scrubbing stubborn grime from hard-to-reach corners. Home renovation projects like this make life easier while boosting your overall property value.
Think about how much better your daily routine will feel. You can secure a free estimate today to see how simple this project really is. Local specialists stand ready to visit your home and map out the perfect plan for your space.
First of all, stepping over a high barrier when you are half-awake is an accident waiting to happen. By removing that old basin, you eliminate a major tripping hazard for everyone in your household. This smart upgrade ensures that older relatives and young kids alike can wash up without any fear of slipping.
Besides safety, you gain a massive amount of physical space. Standard basins consume a huge footprint in small layouts, whereas a modern floor-level enclosure makes the room feel twice as large. This change lets you breathe easier and enjoy a less cramped atmosphere every single day.
To help you visualize the massive differences, here is a quick comparison of the two setups:
| Feature | Old High-Wall Basin | Modern Low-Barrier Setup |
|---|---|---|
| Entry Height | Usually 14 to 18 inches | Often under 3 inches |
| Cleaning Effort | High (lots of bending) | Low (wipe and go) |
| Visual Space | Cramped and bulky | Open and airy |
Now, think about the sheer physical effort of cleaning. Scrubbing a deep, curved basin requires painful bending and kneeling on a cold hard floor. Transitioning to flat, non-porous acrylic walls means you can clean the entire area standing up with a simple squeegee. This benefit alone saves your back and frees up your precious weekend hours.
When you start planning, you will find an incredible variety of wall surrounds and sturdy pans. Selecting high-quality acrylic surrounds ensures your walls resist mold and mildew without requiring constant maintenance. This means your wash area stays sparkling clean with very little effort on your part.
If you prefer a more traditional look, you can opt for gorgeous tile patterns. Although tile requires more grout maintenance, it offers unmatched visual appeal and a custom touch. Which means you can design a space that matches your unique personal style perfectly.
Safety does not mean you have to sacrifice style. Integrating sleek grab bars into the design provides extra stability without making the space look like a sterile hospital room. These accessories give you solid support exactly where you need it most.
Another excellent addition is a comfortable built-in bench or a folding seat. This feature lets you sit back and relax under the warm water after a long, exhausting day. Plus, it makes shaving your legs or washing your feet incredibly simple and safe.
First, a professional technician visits your home to inspect your current plumbing and take precise measurements. This initial step prevents any unexpected surprises once the actual demolition work begins. It also guarantees that your new pan fits snugly into the existing alcove without any awkward gaps.
Next comes the removal of your old, heavy cast iron or fiberglass basin. This part of the job can get pretty messy, but experienced crews handle the heavy lifting and protect your floors from damage. They will haul away the old junk so you do not have to worry about disposal fees.
Finally, the team installs the new slip-resistant pan, hooks up the drain, and seals the waterproof wall panels. This precise process prevents future leaks behind your walls, protecting your home from structural water damage. Most of the time, the entire transformation takes just a couple of days to complete.
Homeowners in Coffee County understand the value of keeping their properties modern and functional. Updating an outdated bathroom is one of the most reliable ways to increase your home's market appeal. Buyers love seeing a fresh, walk-in setup instead of an old, stained basin from decades ago.
Whether you live near the bustling downtown area or closer to the quiet outskirts of Tullahoma, Tennessee, local professionals are ready to help. With a median household income of $44,096 in this lovely community of 19,669 residents, finding cost-effective home improvement solutions is a top priority. Investing in your property now saves you from costly repairs down the road.
If your home is located in the 37388 ZIP code area, scheduling an on-site consultation is incredibly fast and simple. Local contractors know the local building codes inside and out, ensuring a flawless installation. This local expertise guarantees your project meets all safety regulations without any annoying delays.
Stop putting up with an outdated, hard-to-clean bathroom that no longer serves your daily needs. You deserve a beautiful, open space that brings peace and simplicity to your morning routine. Taking the first step toward this upgrade is much easier than you might think.
By requesting a free quote, you get a clear, upfront look at the costs and options available for your home. Friendly local pros will guide you through the process, answering all your questions with zero pressure. This lets you make an informed decision that fits your budget and lifestyle perfectly.
Click here or fill out our quick online form to request your free, no-obligation estimate today. Let a skilled local craftsman transform your bathroom into a modern, low-maintenance sanctuary. You will wonder why you waited so long to make the switch...
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Tullahoma repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Coffee County; the statewide picture lives on Tennessee; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote