Our Stony Ridge crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Mahoning County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of tripping over that high wall every single morning just to wash your hair. This daily struggle can actually become a thing of the past with a smart bathroom upgrade. By swapping that old, unused basin for a modern walk-in stall, you instantly create a safer and much more spacious layout.
Fortunately, our team specializes in making this exact swap quick and painless for local homeowners. We come right to your house to measure your space and give you a free estimate. This means you get a clear plan without any pressure or hidden fees.
Imagine stepping into a bright, open stall instead of balancing on a slippery ledge. This simple change boosts your daily comfort and makes your morning routine feel like a breeze. Let us help you plan this exciting project today.
Honestly, almost nobody has time for long, soaking baths in today's busy world. Most of us just want a quick, refreshing wash before we head out the door. Because of this, that giant porcelain basin sits there collecting dust and taking up precious square footage. Replacing it with a dedicated walk-in stall gives you your floor space back.
When you make this change, your entire bathroom suddenly feels twice as big. This layout shift allows for better airflow and lets in more light. Which means you get a brighter room that feels less like a cramped closet and more like a private oasis. On top of that, cleaning a flat floor is ten times easier than scrubbing deep, rounded corners.
To help you compare your options, we put together a quick look at how these two setups match up in real life.
| Feature | Old Basin Setup | New Walk-In Stall |
|---|---|---|
| Safety Level | High step-over risk | Low barrier entry |
| Space Utilization | Cramped and bulky | Open and airy feel |
| Cleaning Effort | Hard on your back | Quick and simple wipe down |
As you can see, the benefits of modernizing your layout go far beyond just looks. You actually save time on maintenance while gaining a safer home environment. Our local team is ready to help you choose the perfect materials for your style.
Safety should always come first when you are planning a home renovation project. Slipping on wet surfaces is a major worry for folks of all ages. By installing a low-profile pan, you eliminate the need to balance on one foot while stepping into the stream. This simple design change protects your joints and prevents nasty falls.
To make things even safer, we can add stylish grab bars that blend right into your design. These sturdy accessories give you extra leverage when you need it most. Additionally, built-in benches offer a great spot to relax and unwind. This lets you enjoy your daily routine without any physical stress or worry.
Naturally, we also use high-quality, slip-resistant materials for the base of your new stall. This textured surface provides excellent traction even when soapy water is flowing. You will feel completely secure every single time you step inside.
Every homeowner has different tastes, so we offer a wide variety of wall panels and fixtures. You can choose beautiful tile patterns or seamless acrylic walls that require zero grout scrubbing. This flexibility means you get a gorgeous look that matches your personal style perfectly.
To complete the package, we install modern showerheads that offer amazing water pressure. Whether you prefer a rain shower experience or a handy handheld wand, we have you covered. This customization ensures your new setup works exactly how you want it to.
You might worry that a major bathroom renovation will turn your home into a dusty construction zone for weeks. Fortunately, our experienced crew has perfected this specific swap to make it incredibly fast. We respect your home and work hard to get the job done with minimal disruption. In fact, most of our projects are completed in just a couple of days.
First, we carefully remove your old heavy fixture without damaging your existing walls or plumbing. Next, we inspect the subfloor to ensure there is no hidden water damage or mold. This step is crucial because it protects the structural integrity of your home for years to come. After that, we install the new drain system and secure your chosen wall panels.
Once everything is sealed tight, we clean up every speck of dust before we leave. This means you can start enjoying your upgraded space almost immediately. We take pride in our clean work sites and friendly service.
We love working right here in this wonderful corner of Wood County, Ohio. Since this unincorporated community is quite small, with around 411 friendly neighbors living under the 43463 ZIP code, we treat everyone like family. Our team understands the local home styles and the specific plumbing setups common in this region.
Because the median household income here is stable, we focus on providing high-quality solutions that fit real budgets. We never try to upsell you on fancy gadgets you do not need. Instead, we offer honest advice and reliable craftsmanship that adds real value to your property.
Are you ready to transform your bathroom into a modern, accessible space? Taking the first step is completely free and comes with absolutely no obligations. We will drive right out to your home, assess your current layout, and discuss your design ideas. This personal visit allows us to give you an incredibly accurate quote.
During our visit, we can show you samples of our durable, non-porous materials. You will get to see and feel the quality before making any decisions. This helps you visualize exactly how your new space will look once the work is complete.
Do not spend another day climbing over that awkward wall or worrying about slips and falls. Contact us today to schedule your free home consultation and estimate. Let us handle all the hard work while you sit back and enjoy the beautiful results!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Stony Ridge repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Mahoning County; the statewide picture lives on Ohio; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote