Our Steele crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Pemiscot County within days.
Written quote at no cost, one callback, no chasing afterwards.
You probably find yourself staring at that outdated, bulky basin in your bathroom and wondering how much easier life would be with a modern walk-in setup instead. Climbing over a slippery porcelain barrier when you are half-awake is a recipe for a nasty slip, which is why swapping it out for a sleek, low-profile basin makes total sense. We are right here in the local area to help you transform your daily wash routine into a much safer and highly convenient experience without any hassle.
Our team specializes in removing those giant, unused tubs and replacing them with beautiful, spacious walk-in enclosures. Getting a personalized layout plan does not cost you a single cent because we believe in providing honest advice right at your doorstep. By inviting us over for a quick assessment, you will discover how easy it is to modernize your home and increase its overall utility.
Think about how often you actually take a full soak compared to how often you just want a quick, refreshing wash. Most busy folks realize that a dedicated standing stall fits their daily routine much better than an old dusty basin. On top of that, removing that bulky obstacle frees up a surprising amount of floor space, which makes your entire bathroom feel twice as big.
Another major advantage involves keeping your family safe from painful slips and falls on wet surfaces. Because we install bases with a very low threshold, you do not have to perform gymnastic moves just to get clean. This simple change brings incredible peace of mind, especially if you plan on staying in your home for many years to come.
Let us look at some of the awesome perks you get when you decide to upgrade your washing area:
| Feature of the Upgrade | Direct Benefit to You |
|---|---|
| Low-threshold entry pan | No more tripping hazards or high stepping |
| Sleek glass enclosures | Makes your bathroom look larger and brighter | Saves you hours of scrubbing moldy grout joints |
If you hate spending your weekends scrubbing moldy tile grout with an old toothbrush, you will absolutely love the non-porous materials we use. These modern solid surfaces resist grime build-up naturally, meaning you only need a quick wipe to keep everything sparkling. Which means you get to spend your valuable free time relaxing instead of cleaning.
First, we sit down with you to discuss your vision and look at the actual layout of your current plumbing fixtures. Since we know every home has its own quirks, we take precise measurements to ensure your new setup fits like a glove. This careful planning stage prevents any nasty surprises once the actual physical labor begins.
Next, our skilled crew carefully extracts your old cast iron or fiberglass basin without damaging the surrounding walls. We inspect the underlying subfloor for any hidden water damage or rot to make sure your new foundation is rock solid. After fixing any old leaks, we install your brand-new premium base and connect it securely to your existing drain lines.
Finally, we put up the stunning wall surrounds and install your chosen hardware, like rainfall showerheads or sturdy grab bars. We clean up every speck of dust before we leave, so your new oasis is ready for immediate use. You will be amazed at how quickly our team can turn a chaotic construction zone into a beautiful retreat.
When you design your new setup, you get to choose from a wide variety of colors, textures, and patterns. Some homeowners prefer the classic look of subway tile, while others want a sleek, modern stone appearance. Because our acrylic products are incredibly durable, they will not chip, crack, or fade over time.
Additionally, you can customize your new space with built-in shelves, corner caddies, and even comfortable bench seating. These little details ensure that all your shampoo bottles and soaps stay organized and within easy reach. This lets you create a personalized space that matches your daily habits perfectly.
Many folks worry that changing their layout will require moving all their pipes around, which sounds expensive. Fortunately, our clever designs utilize your existing plumbing footprints to keep your costs down. Our experienced installers know exactly how to adapt your old drain system to accommodate a rapid-draining floor pan.
We also install high-quality pressure-balancing valves to protect you from sudden bursts of freezing or scalding water. This means your water temperature stays perfectly consistent even if someone else runs the kitchen sink. Security and reliability are built right into every single pipe we connect.
Living in a cozy community of about 2,188 residents means we truly care about helping our neighbors improve their daily lives. We know that the local median household income is around $37,941, so we always focus on providing affordable options that deliver maximum value. We treat every home in Steele, Missouri, with the exact same respect we would show to our own families.
Whether your home is located in the 63877 ZIP code or the surrounding rural areas, we are ready to drive out to your property. We bring all our samples directly to your door so you can see the materials in your own lighting. This personalized touch ensures you make the perfect choice for your specific budget and style preferences.
Our goal is to make these vital home upgrades accessible to everyone who needs a safer way to wash. We offer transparent pricing with absolutely no hidden fees, so you know exactly what to expect before we turn a single wrench. You do not have to put up with a cramped, dangerous wash space any longer.
Most of our projects take only a couple of days to fully complete from start to finish. Because we prepare all our materials ahead of time, we minimize the disruption to your daily household routine. You will not have to live without a working bathroom for weeks on end.
We work quickly but we never cut corners when it comes to waterproofing and sealing your new enclosure. Our team stays focused on your project until it is completely done to your total satisfaction. This efficient process lets you get back to your normal life in no time at all.
Yes, swapping out an old, ugly tub for a modern walk-in unit is highly attractive to potential buyers today. Most modern home buyers prefer spacious, easy-to-use stalls over small basins they will never actually sit in. Which means this project is a smart investment that can help your home sell faster down the road.
However, if your home only has one bathroom, we will chat about the pros and cons of making the switch. We want to make sure you make a decision that fits your long-term plans perfectly. Our honest approach helps you weigh all the options before spending your hard-earned money.
Absolutely, because we use advanced sealing techniques and high-quality silicone to prevent any water from escaping. The sloped design of the base guides all the water directly toward the drain instantly. You will not have to worry about puddles on your bathroom floor ever again.
On top of that, we install heavy-duty glass doors or weighted curtains that keep the warmth and water exactly where they belong. This keeps your bathroom floor dry and prevents any mold from growing under your flooring. Every single detail is engineered to keep your home dry and safe.
Now is the perfect time to stop worrying about slips and start enjoying your bathroom again. Our friendly team is ready to answer all your questions and help you design the perfect wash space. We will provide a complete, written estimate absolutely free of charge, with no pressure to make a decision on the spot.
All you have to do is reach out to us to schedule your convenient in-home consultation. We will look at your current bathroom, listen to your ideas, and give you a clear plan to make it happen. Let us help you transform your home into a safer, more beautiful place to live today!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Steele repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Pemiscot County; the statewide picture lives on Missouri; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote