Our South Hempstead crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Nassau County within days.
Written quote at no cost, one callback, no chasing afterwards.
Now, changing that old bathing tub into a sleek walk-in wash station makes your daily routine much better. This smart home update lets you enjoy a roomy shower area without dealing with high tub walls.
On top of that, local homeowners in this Nassau County spot often want more modern bathrooms. Which means upgrading your bathing zone adds great value to your property.
This popular bathroom remodeling project brings amazing changes to your daily life. Because old tubs take up too much floor space, removing them opens up the entire room.
Following this logic, you get a much safer environment for taking your morning wash. This lets you avoid tripping over high ceramic barriers while stepping inside.
First, our crew removes your heavy cast iron or fiberglass basin. This clears the way for a brand new water-tight base and custom wall surrounds.
Next, we update the plumbing lines to fit your new modern fixture setup. This ensures proper drainage and stops annoying leaks behind your drywall.
When picking out your new enclosure, durability matters a lot. Therefore, we use high-grade acrylic and solid surface panels that resist mold growth.
This smart choice lets you spend less time scrubbing and more time relaxing. Your gorgeous new wash station stays shiny with very little maintenance work.
With a median household income hovering around $106,442 in these local ZIP codes, investing in your home just makes sense. Upgrading outdated fixtures attracts future buyers if you ever decide to sell your property.
Besides that, modernizing your bathing area gives you an immediate boost in daily relaxation. That means every single morning starts on a wonderfully positive note.
| Project Feature | Direct Homeowner Benefit |
|---|---|
| Low-threshold entry | Prevents slips and falls during entry |
| Non-porous acrylic walls | Eliminates heavy scrubbing and mold |
| Custom glass doors | Makes small bathrooms feel much bigger |
Many residents worry about construction messes ruining their daily schedules. However, our trained crew works fast to finish the job cleanly and efficiently.
This lets you get back to your normal routine with zero hassle. Plus, we haul away all the old debris so you do not have to lift a finger.
Typically, these specialized bathroom transformations take only a few days from start to finish. During this time, our local technicians protect your floors and keep the work area tidy.
Following the initial demolition, we waterproof the entire wet zone to prevent future structural damage. This meticulous attention to detail guarantees long-lasting performance for years.
Operating right here inside a population of 3,123 residents means we treat every customer like a close neighbor. Our dedicated technicians show up on time and respect your personal living space.
Instead of guessing costs, we give you a transparent breakdown before any work begins. This honesty lets you plan your home improvement budget without any stress.
Every household has unique design preferences and specific accessibility needs. Consequently, we offer countless combinations of grab bars, built-in seating, and shelving.
This flexibility lets you tailor your new walk-in bathing zone to match your exact lifestyle. Your bathroom finally reflects your personal taste while staying completely functional.
Ready to upgrade your outdated bathroom fixtures into a modern masterpiece? Right now is the best moment to request a complimentary evaluation for your property.
Simply reach out to our local team today to schedule your zero-cost project estimate. This no-obligation consultation gives you clear pricing and expert design advice instantly.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around South Hempstead repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Nassau County; the statewide picture lives on New York; the wider region is the Northeast; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote