Our Silverdale crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Kitsap County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high porcelain wall every single morning just to wash up. This daily obstacle course gets old fast, especially when you just want a quick, refreshing splash. By swapping that clunky old basin for an open, low-profile washing space, you instantly make your bathroom feel twice as big.
Fortunately, our skilled local team can handle this entire swap for you without any of the typical remodeling headaches. We come right to your home in Kitsap County to look at your layout and give you a free, no-obligation estimate. This means you get clear, honest pricing tailored to your specific walls and plumbing setup.
To be honest, many homes built a few decades ago came with standard layouts that just do not fit our busy, modern lives. Who actually has time for a long soak these days when a swift, stream-lined wash is what we actually need? Upgrading your setup improves your daily routine while adding serious value to your property.
Think about how much safer your morning will be when you no longer have to balance on one slippery foot. By removing that tall barrier, you drastically lower the risk of slips and falls in the wettest room of your house. This simple upgrade brings incredible peace of mind for everyone in your home, from young kids to visiting grandparents.
On top of that, cleaning becomes a total breeze when you do not have to bend over and scrub deep, dusty corners. Modern solid-surface walls and high-quality acrylic pans resist mold and grime much better than old cast-iron basins. This lets you spend your weekends relaxing instead of scrubbing grout lines on your hands and knees.
To help you visualize the difference, let us look at how these two setups compare in daily life:
| Feature | Old Deep Basin Setup | New Walk-In Upgrade |
|---|---|---|
| Step-In Height | Usually 14 to 18 inches high | Often less than 3 inches |
| Cleaning Effort | High, lots of bending required | Low, simple wipe-down surfaces |
| Visual Space | Cramps the room layout | Opens up the floor plan |
| Water Usage | High volume for soaking | Efficient, fast drainage |
Which means you get a cleaner, safer, and much more attractive room with a fraction of the maintenance. Our local crew handles everything from pulling out the heavy old unit to sealing the very last seam. We make sure the transition is seamless so you can start enjoying your new space right away.
Now, you get to choose from a wide variety of beautiful, durable materials that match your home decor. Whether you love the classic look of subway tile or prefer seamless, modern panels, we have options for every taste. These materials resist water damage and keep their shine for years to come.
This lets you customize your hardware with rainfall showerheads, handheld sprayers, or even multiple body jets for a spa-like experience. You can also add built-in shampoo niches and corner shelves to keep your bottles organized and off the floor. No more balancing soap bars on narrow ledges...
Additionally, we can install sturdy grab bars and comfortable built-in seating that look modern rather than institutional. These features provide extra stability without making your bathroom look like a hospital room. You get the perfect blend of safety and cozy luxury in your new layout.
Because we focus on smart design, we position these elements exactly where your body naturally needs them. This custom placement makes your daily routine feel effortless and incredibly secure. You will wonder why you did not make this change years ago!
Living here in Silverdale, Washington, we deal with plenty of damp weather, which makes moisture control in bathrooms absolutely critical. Our homes in ZIP codes like 98315 and 98383 require extra attention to waterproofing to prevent mold from taking hold behind the walls. We use advanced moisture barriers and high-grade sealants designed specifically for our wet climate.
With a local median household income of about $71,310, we know that area homeowners want to make smart, lasting investments in their properties. Our team respects your budget and your time, working efficiently to finish the job with minimal disruption to your household. We treat your home with the utmost care, cleaning up thoroughly before we leave.
When you work with us, you are choosing neighbors who understand the unique plumbing quirks of homes in this beautiful community of 21,071 residents. We make sure every drain line is cleared, every pipe is secure, and every wall is perfectly plumb. You get reliable, high-quality craftsmanship that stands up to the test of time.
First, we schedule a convenient time to visit your home and inspect your existing bathroom layout. We measure your current footprint, check the condition of your subfloor, and locate your main drain lines. This careful inspection ensures we do not run into any unexpected surprises during the installation.
Next, we sit down with you to discuss your vision, show you material samples, and plan the layout. We explain all your options clearly, helping you select the best materials for your needs and budget. You get a detailed, written estimate right then and there with absolutely no hidden fees.
Once you approve the plan, we order the custom materials and schedule the actual transformation dates. Our team works quickly, often completing the entire teardown and rebuild in just a few days. We minimize the dust and noise so you can go about your week as normally as possible.
Why keep struggling with a cramped, outdated bathroom when a modern wash space is one click away? Our team is ready to help you transform your space into a bright, safe, and beautiful oasis. We bring the skills, the tools, and the local experience needed to get the job done right the first time.
By choosing to upgrade, you invest in your daily comfort and the long-term value of your home. You will love the fresh, open feel of your new room every time you walk through the door. It is one of the smartest home improvements you can make.
Contact us today to request your free, friendly, in-home estimate and start planning your project. We will answer all your questions, show you what is possible, and help you create the perfect setup. Let us turn that old, dusty basin into your favorite part of the house!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Silverdale repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Kitsap County; the statewide picture lives on Washington; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote