Our Raymond crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Union County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of climbing over that high wall every single morning just to get clean.
This common issue causes daily frustration and even poses a real slipping hazard for your family.
By swapping that deep, unused tub for a spacious walk-in stall, you instantly create a safer and much more open area.
Think about how much easier your mornings will become when you can just step right in.
Our team of local builders loves helping people make this smart transition in their homes.
We will visit your house to look at your setup and give you a free project estimate without any pressure.
Imagine saying goodbye to that outdated, hard-to-clean basin that just collects dust and grime.
Instead, you get a sleek, modern setup that fits your daily routine perfectly.
Let us help you plan this upgrade so you can finally enjoy your bathroom again.
Many homes built a few decades ago came with standard setups that do not match how we actually live today.
Most busy people prefer a quick, refreshing wash over soaking in a tub for an hour.
Taking out the old basin gives you a lot of extra floor space to move around freely.
This change also means you will spend way less time scrubbing stubborn mildew from old porcelain.
Modern acrylic and tile materials resist grime much better than those old, yellowing tubs.
Which means you get to spend your weekends relaxing instead of cleaning bathroom corners with a toothbrush.
On top of that, your new walk-in setup can include handy features like built-in benches and recessed shelving.
These smart additions keep your shampoos organized and off the floor.
You will love how organized and spacious your room feels after we finish the job.
| Feature | Old Standard Basin | Modern Walk-In Stall |
|---|---|---|
| Step-In Height | High (15 to 20 inches) | Very Low (3 to 5 inches) |
| Cleaning Effort | High (hard to reach corners) | Low (smooth, modern walls) |
| Floor Space | Cramped and narrow | Open and breezy |
Demolition day might sound scary, but our crew keeps the process completely smooth and stress-free.
First, we carefully protect your flooring and carpets before we even touch a single tool.
Then, we remove the heavy old cast iron or fiberglass unit without damaging your surrounding drywall.
Once the old basin is gone, we inspect the wood framing and pipes underneath for any hidden water damage.
Fixing these issues early prevents mold from growing behind your new walls later on.
This attention to detail ensures your home stays solid and dry for many years to come.
After repairing the subfloor, we install a waterproof pan and run new plumbing lines.
We adjust the valves so your hot water flows perfectly and stays at a safe temperature.
You get peace of mind knowing every pipe is sealed tight by experienced hands.
You do not have to settle for a boring, cookie-cutter look when planning this upgrade.
We offer gorgeous stone patterns, classic subway tiles, and seamless panels that fit your unique taste.
This lets you design a space that feels like a private spa right inside your home.
Choosing the right fixtures can also help you save money on your monthly utility bills.
We install high-efficiency showerheads that deliver amazing water pressure while using less water.
This simple upgrade protects your wallet while giving you a luxurious experience every single day.
Do you need extra safety features like sturdy grab bars or a slip-resistant floor texture?
We can blend these safety elements right into the design so they look beautiful and modern.
You get a space that is incredibly safe without sacrificing any style or visual appeal.
Living in Union County means you know the value of a solid, well-maintained home.
With a local median household income of $98,056, folks in this beautiful area appreciate quality craftsmanship.
Upgrading your main bathroom is one of the best ways to increase your overall property value.
Buyers looking at homes in the 43067 ZIP code area often prefer modern walk-in stalls over old tubs.
They want a home that is move-in ready and does not require immediate remodeling work.
So, this project actually helps protect your investment if you ever decide to sell down the road.
Even if you plan to stay in your home forever, this change makes aging in place much safer.
Preventing slips and trips is the best way to maintain your independence as time goes on.
Our friendly crew is proud to serve the tiny, tight-knit community of Raymond, Ohio, where we treat every neighbor like family.
When you contact us, we do not just send you a random estimate over the internet.
We come directly to your house to measure your space and look at your existing plumbing layout.
This personal visit allows us to give you a highly accurate price quote with no hidden surprises.
We will sit down at your kitchen table and listen to exactly what you want to achieve.
Whether you want a simple budget-friendly swap or a complete luxury makeover, we have options for you.
You will get all your questions answered by a friendly local installer who truly cares.
After we agree on a plan, we work quickly to get the job done with minimal disruption.
We know how annoying it is to have contractors dragging dirt through your house for weeks.
That is why we clean up our mess completely every day until the project is finished.
Do not spend another week struggling to get in and out of an old, slippery tub.
You deserve a bathroom that feels open, clean, and completely tailored to your daily needs.
Let our dedicated local team handle all the heavy lifting, plumbing, and tiling for you.
We make it incredibly easy to get started with this exciting home improvement project.
Simply reach out to us today to request your completely free, no-obligation home estimate.
We will help you turn that cramped, outdated corner into your favorite part of the house!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Raymond repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Union County; the statewide picture lives on Ohio; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote