Across Ray County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, slippery barrier just to wash off the dust of a long day. Honestly, many of us struggle with those outdated, deep basins that take up way too much space and feel like a hazard. This handy guide shows you how to swap that old basin for a modern walk-in stall and get a free quote today.
If you want to make your daily routine much safer, this quick upgrade changes everything. By removing the old, unused tub and installing a spacious basin-free stall, you regain your peace of mind. Naturally, this makes your morning routine feel like a breeze instead of a hurdle course.
Actually, our team of local builders handles the entire messy process from start to finish. We take care of the heavy lifting so you do not have to worry about a thing. Plus, we will visit your home to measure everything and give you a free estimate on the spot.
First of all, think about how much space you actually waste with an old iron or acrylic basin. Most people rarely take full baths anymore, which means that giant fixture just sits there collecting dust and soap scum. By opting for a sleek walk-in enclosure, you instantly open up the room and make it feel twice as big.
In addition to saving space, you also improve the safety of your home. Slipping while climbing over a high ledge is one of the most common household accidents. Replacing that steep barrier with a low-profile threshold helps you avoid nasty falls and keeps everyone secure.
On top of that, cleaning a flat wall system is incredibly easy compared to scrubbing deep corners. You will spend far less time on your knees with harsh chemicals. This means you get more free time to enjoy your weekends instead of scrubbing grout lines.
Whenever you decide to sell your home, buyers look closely at the main bathrooms. Most modern families prefer a spacious stall with beautiful acrylic wall surrounds over an old, stained basin. Making this change now boosts your home value and makes it highly attractive to buyers.
To give you a better idea of what to expect, we put together a quick comparison of the two setups:
| Feature | Old Deep Basin | New Walk-In Stall |
|---|---|---|
| Entry Height | 15 to 20 inches | 3 to 5 inches |
| Cleaning Effort | High (lots of corners) | Low (smooth panels) |
| Space Efficiency | Cramped and bulky | Open and airy |
As you can see, the benefits of upgrading are pretty hard to ignore. Our skilled crew makes sure the transition is smooth and fits your budget perfectly. We love helping homeowners in this beautiful region turn their cramped rooms into beautiful, functional spaces.
Now, let us talk about the fun part, which is picking out your new design. You can choose from gorgeous non-porous acrylic panels, classic tile, or even stone-look composites. Each material has its own set of perks, but we always recommend options that keep moisture from seeping into your subfloor.
If you choose high-quality acrylic, you get a beautiful surface that resists mold and mildew. This material does not crack or chip easily, which means it stays looking brand new for decades. It also comes in many colors and patterns to match your personal style.
On the other hand, some people still love the look of traditional ceramic tile. While tile looks amazing, it does require regular sealing to keep the water out of the walls. Whichever path you choose, our local installers ensure every seam is completely watertight.
Once you pick the main walls, you can add some fantastic features like built-in seating or sturdy grab bars. These additions do not just help with balance; they also make your daily wash feel incredibly luxurious. You can even add custom corner caddies to hold all your favorite shampoos and soaps.
Another great option is a sliding glass door, which keeps water inside while letting light flow through the room. Alternatively, a simple curtain rod works perfectly if you prefer a softer look. We help you design the layout during our initial home visit so you get exactly what you want.
You might worry that remodeling your bathroom will turn your home into a dusty disaster zone for weeks. Fortunately, our specialized process is incredibly fast and clean. We often finish the entire tear-out and installation in just a couple of days.
To start, our crew carefully protects your flooring before we bring in any tools. Then, we demo the old fixture, check the plumbing pipes, and fix any hidden water damage behind the walls. This step is crucial because we want to make sure your home foundation is solid and dry.
After repairing the framing, we install the new leak-proof pan and slide the wall panels into place. Finally, we hook up your new showerhead fixtures and seal every single joint with premium silicone. This precise work ensures you will not have to worry about leaks damaging your ceiling downstairs.
While DIY videos make plumbing look easy, it is very easy to make a costly mistake. One loose pipe behind a wall can cause thousands of dollars in water damage before you even notice it. Hiring local professionals gives you a solid warranty and total peace of mind.
Our team knows the local building codes inside and out, especially here in Ray County, Missouri. We make sure every drain pipe is sloped correctly and every valve is up to code. This attention to detail protects your investment and ensures your system works flawlessly for years.
Perhaps you are wondering about the cost of making this fantastic upgrade in your home. Every house is a little different, which is why we offer completely free, no-obligation consultations. We come out, look at your current plumbing, discuss your ideas, and give you an honest price.
This lets you plan your budget without any hidden surprises or pressure. We believe in being upfront with our neighbors, which is why we never use sneaky sales tactics. You get a clear, written estimate that is good for your project.
To take the first step toward a safer and more beautiful home, simply fill out our quick request form. We will get back to you quickly to schedule a convenient time for your home visit. Let us help you turn that old, clunky basin into a gorgeous, modern walk-in oasis...
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote