Our Pine Ridge crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Delaware County within days.
Written quote at no cost, one callback, no chasing afterwards.
Do you hate climbing over a high porcelain wall just to get clean? Well, changing your layout gives you a relaxing oasis right at home.
Truthfully, this upgrade changes your bathroom experience completely. Plus, it adds serious value to your property.
Most older homes feature bulky basins that take up way too much room. Fortunately, replacing those outdated fixtures lets you move around without bumping your elbows.
By ditching that old tub, you get a much safer stepping area. Consequently, slips and falls become a worry of the past.
Smaller rooms feel cramped when a giant ceramic container sits in the corner. Therefore, swapping it for a sleek glass enclosure opens up the whole floor plan.
This layout shift creates an illusion of a larger washroom. Meanwhile, you gain practical space for your daily routines.
Nestled right inside Delaware County, our lovely neighborhood boasts a cozy population of roughly two thousand seven hundred folks. Because many properties feature traditional architecture, updating worn plumbing fixtures makes complete sense for local residents.
With median earnings sitting comfortably around healthy levels, investing in home improvements is a smart financial move. Moreover, local ZIP codes like 19086 see plenty of property updates every single year.
First off, workers haul out that heavy cast iron basin carefully. This messy task requires proper tools to protect your surrounding tiles.
Once the old unit is gone, technicians inspect the subfloor for hidden water damage. Therefore, you avoid nasty surprises down the road.
Next up, plumbers reroute the drain to match your brand-new stall setup. This ensures your water flows smoothly down the pipe every single time.
After that, heavy-duty waterproof membranes get installed behind the walls. Consequently, mold and mildew never get a chance to grow in your damp zones.
| Feature | Old Bathtub | Modern Walk-In Stall |
|---|---|---|
| Safety | High step over wall | Zero threshold entry |
| Cleaning | Hard to scrub corners | Wipe down in minutes |
| Style | Outdated appearance | Sleek luxury look |
Looking at this chart helps you understand why so many people make the switch. Clearly, modern designs offer massive perks for everyday living.
Spending money on your house usually feels a bit scary at first. However, updating your bathing area offers a great return on investment when selling.
Future buyers love walking into a fresh and modern wash space. Because of this, your house might sell much faster on the market.
Selecting the right wall surrounds sets the mood for your entire room. Naturally, natural stone tiles give you that spa-like feeling every morning.
Acrylic panels offer an easier cleaning routine without pesky grout lines. Thus, you spend less time scrubbing and more time relaxing.
Clear glass panels make the room look bright and airy. On top of that, treated glass resists water spots like a champ.
Brushed nickel handles and matching showerheads tie the whole aesthetic together. Which means your guests will definitely admire your good taste.
Sometimes old framing hides uneven walls that complicate the alignment process. Fortunately, experienced builders know how to shim and square everything perfectly.
Tight doorways in historic dwellings can also slow down material delivery. Yet, skilled crews always find clever ways to maneuver parts safely.
Squeegeeing the glass after every use prevents stubborn mineral buildup. Therefore, your enclosure stays crystal clear for many years.
Using mild soap instead of harsh chemicals protects your new acrylic surfaces. As a result, your investment keeps shining brightly.
Are you finally ready to ditch that clumsy tub for good? Well, getting professional help makes the transformation stress-free and fast.
Reach out today to request your completely free quote with zero obligations attached. Let local experts bring your vision to life right now.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Pine Ridge repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Delaware County; the statewide picture lives on Pennsylvania; the wider region is the Northeast; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote