Across Perkins County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, dangerous porcelain ledge every single morning just to get clean. Fortunately, swapping out that deep, unused basin for a walk-in stall makes your daily routine much faster and incredibly safer. This smart home update instantly opens up your room and gives you a spacious area to wash away your daily stress.
Indeed, many homeowners find themselves slipping on slick, sloped basin floors that were never really meant for standing. By making this change, you replace a major tripping hazard with a flat, slip-resistant entryway. Which means you can finally stop worrying about losing your balance on wet porcelain surfaces.
Now, let us talk about how much easier your weekly cleaning chores will become after this swap. Modern solid-surface walls do not have those annoying grout lines that collect mold and stubborn soap scum. This lets you spend your precious weekends relaxing instead of scrubbing tile joints with an old toothbrush.
First, think about how much physical space a traditional soaking basin actually wastes in a small room. Replacing it with a low-threshold pan gives you extra floor area and makes the entire layout feel twice as big. On top of that, we can install custom glass doors that reflect light beautifully throughout the space.
Actually, many people in our rural communities prefer practical utility over dusty fixtures they never fill with water. Since our local area has a smaller population of under three thousand residents, keeping homes functional for lifetime living is a major priority. This specific upgrade helps you stay in your beloved home much longer as you age gracefully.
Additionally, let us look at some of the physical options you can choose for your new setup:
| Feature Option | Direct Benefit to You |
|---|---|
| Low-profile base | Easy entry without lifting your legs high |
| Built-in seating | Sit down safely while you wash your feet | Extra stability on slippery surfaces |
Naturally, your safety is our main focus when we design these modern walk-in spaces. We only use premium, thick acrylics and heavy-duty hardware that will not bend, crack, or leak over time. That way, you get peace of mind knowing your subfloor stays completely dry and free from hidden water damage.
To begin, our local team visits your house to take precise measurements of your existing layout. We discuss your personal style preferences, budget goals, and any physical mobility issues you want to address. This initial step ensures we design a custom solution that fits your life perfectly.
After that, we carefully remove your old, heavy cast iron or fiberglass basin without damaging your walls. Our experienced crew inspects the plumbing hidden behind your drywall to ensure there are no slow leaks or rotten wood. If we find any issues, we fix them immediately so your new installation has a rock-solid foundation.
Next, we widen your old drain line to handle the rapid water flow of a modern multi-headed system. This crucial plumbing step prevents water from pooling around your ankles while you enjoy your morning wash. Once the pipes are ready, we install your beautiful new wall panels and custom glass enclosures.
Perhaps you want a sleek, modern look with dark hardware and light-colored marble pattern walls. We offer dozens of texture and color combinations that mimic expensive stone without the high price tag. This lets you design a gorgeous washroom that matches the unique character of your home.
Besides the aesthetics, we can add useful accessories like recessed corner caddies for your shampoos and soaps. These integrated shelves keep your bottles off the floor and within easy arm reach. Which means you will never have to bend down and strain your back just to grab the body wash...
Furthermore, we highly recommend adding a handheld wand alongside your main rainfall showerhead. This versatile tool makes it incredibly easy to clean your pets, wash the walls, or rinse off while seated. You get total control over where the water goes, which simplifies your entire bathing routine.
Living in Perkins County, South Dakota, means we value hard work, honesty, and making smart financial choices for our properties. With a local median household income of around forty-seven thousand dollars, every home improvement project must deliver real, long-term value. Installing a modern walk-in stall increases your property value while making your daily life much more comfortable.
Because our region experience cold winters, having a draft-free, insulated washing space is incredibly important. We seal every seam with high-grade silicone that keeps warm air inside your stall. This prevents those chilly drafts from ruining your warm morning routine.
Whether you live in ZIP code 57638, 57626, or any other nearby rural route, we travel directly to your doorstep. We bring material samples right to your kitchen table so you can see and feel the quality yourself. This hands-on approach removes all the guesswork from your remodeling project.
To start, you do not have to worry about high-pressure sales tactics or hidden fees when you work with us. We believe in transparent, upfront pricing so you can make the best decision for your family budget. Our friendly team provides a detailed breakdown of all labor and material costs before we ever touch a tool.
Therefore, we invite you to take the first step toward a safer and more beautiful home today. By requesting a complimentary on-site evaluation, you get professional advice tailored specifically to your bathroom layout. We will answer all your questions and help you design the perfect wash space.
Do not wait until a slippery basin edge causes a painful fall or an expensive injury. Contact us today to secure your free quote and discover how simple this bathroom upgrade can be!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote