Our Oakland crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Susquehanna County within days.
Written quote at no cost, one callback, no chasing afterwards.
Are you tired of climbing over a steep barrier just to wash up? Swapping that clunky old basin for a sleek walk-in enclosure will instantly modernize your daily routine. Let us help you make this upgrade simple with a free on-site estimate today!
First of all, you might feel like your current setup eats up your entire bathroom. By removing that massive, outdated iron or acrylic basin, you suddenly open up a world of floor space. This lets you move around freely without bumping your shins on cold porcelain every morning.
Naturally, the safety aspect of this home improvement project remains a huge deal for many folks. Stepping over a high ledge on a slippery surface poses a real danger daily. Which means that installing a low-profile basin alternative keeps your feet firmly on the ground.
On top of that, cleaning becomes ten times easier once you make the switch. You will no longer have to bend over at awkward angles to scrub stubborn grime out of deep corners. Instead, you get to wipe down flat wall panels and glass doors while standing up comfortably.
Now, you need to think about what kind of style fits your daily routine best. Some homeowners prefer a minimalist look with completely open glass panels to maximize light. This gives your washroom a bright, spacious feel that breathes new life into the entire house.
Conversely, you might want solid sliding doors to keep the warm steam locked inside your new space. This choice ensures you stay warm during those freezing winter mornings here in the northeastern corner of the Keystone State. It also prevents water from splashing onto your dry bathroom floor.
To help you weigh the options, let us look at the main design paths you can take:
| Design Type | Key Feature | Primary Benefit |
|---|---|---|
| Barrier-Free Entry | Zero threshold floor pan | Maximum accessibility for all ages |
| Low-Profile Step-In | Very low outer ledge | Keeps water contained easily |
| Glass Enclosure | Sliding or pivoting doors | Makes small rooms look much bigger |
As you can see, every design serves a specific purpose depending on your personal needs. Our team specializes in customizing these exact features so your finished space matches your daily habits perfectly. We come directly to your home to measure everything and provide a completely free quote.
To start, we carefully remove your old cast iron or steel tub without damaging your existing walls. This messy demolition work requires experienced hands to avoid hitting hidden copper pipes. We handle all the heavy lifting and haul away the debris so you do not have to worry about clean-up.
After that, we inspect the subfloor underneath to ensure no hidden mold or water rot exists. This crucial step protects your home from structural issues down the line. We fix any weak wooden joists before we even think about putting down the new slip-resistant floor pan.
Finally, we run the new plumbing lines and secure the waterproof wall surrounds. This ensures you get leak-free performance for decades to come. Once we seal the glass doors and hook up your new showerhead, your modern oasis is ready for action.
This is where you get to have some fun with the details of your project. Choosing a matte black or brushed nickel showerhead instantly elevates the look of your entire washroom. These modern finishes resist water spots, which means you spend less time polishing metal.
Additionally, adding built-in shelving or a corner seat provides incredible convenience during your daily routine. You can store all your shampoos and soaps neatly off the floor. This keeps your space looking organized and free of clutter.
Living in Susquehanna County means dealing with unique local home styles and older plumbing systems. Many houses in our neighborhood possess charming character but require extra care during renovations. We understand the specific build of homes in this beautiful region of 601 residents.
With a median household income of $43,977, we know that local families value smart investments that actually last. Spending your hard-earned money on a home upgrade should bring you daily joy and boost your property value. Our affordable remodeling services fit perfectly within local budgets.
Whether your home sits near the river or up on the hills in the local ZIP codes, we travel right to your doorstep. We know the local building codes inside and out, ensuring a safe and fully compliant installation. You can trust us to treat your home with the utmost respect.
First, attempting a DIY project of this scale often leads to costly plumbing mistakes and water damage. One tiny gap in the silicone caulk can let moisture seep into your walls undetected. This eventually ruins your drywall and creates a massive headache.
By hiring our dedicated crew, you get peace of mind knowing the job is done right the first time. We bring all the specialized tools, high-quality sealants, and heavy-duty materials directly to your home. This saves you multiple trips to the hardware store.
Furthermore, we complete the entire physical transition in a fraction of the time it would take an amateur. We know you cannot afford to have your main bathroom out of commission for weeks on end. Our efficient workflow gets your water running again quickly.
So, why keep putting up with a useless tub that you never even fill with water? You deserve a modern, safe, and beautiful space that makes getting ready in the morning a breeze. Let us take a look at your layout and discuss what we can do for you.
Contact us today to schedule your completely free, no-obligation estimate right in your home. We will measure your space, show you material samples, and give you an honest price. Take the first step toward your dream bathroom today!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Oakland repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Susquehanna County; the statewide picture lives on Pennsylvania; the wider region is the Northeast.
One three-day job stands between this bathroom and its best fixture.
Get my free quote