Across Mountrail County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Every single morning you face the same annoying obstacle course right in your own home. That deep, outdated iron tub is not doing you any favors anymore. We can help you change that setup quickly.
Indeed, swapping that old basin for a modern walk-in setup makes your daily routine much safer. Our crew specializes in removing those clunky old fixtures and installing beautiful, low-profile bases. You get a fresh look without the hassle of a full remodel.
Imagine stepping into a spacious, open area without tripping. This upgrade brings incredible peace of mind for everyone in your household. Let us show you how easy this home transformation can be.
First of all, safety is the main reason why folks make this smart change. Traditional deep basins present a serious slipping hazard when you try to balance on one foot to get out. Our low-threshold bases eliminate that dangerous hurdle entirely.
Besides the safety aspect, you will absolutely love how much bigger your bathroom feels. A modern glass enclosure opens up the room visually. This makes even a compact guest bathroom feel like a high-end spa retreat.
On top of that, cleaning becomes a total breeze. You can finally say goodbye to scrubbing those hard-to-reach corners and dirty grout lines. Our modern acrylic surrounds resist mold and soap scum build-up naturally.
When you start planning, you need to think about durability and maintenance. Acrylic is a fantastic option because it does not chip or crack like old porcelain. It also retains heat well so your feet do not get cold when you step inside.
Alternatively, some homeowners prefer custom tile work for a more personalized touch. While tile requires a bit more upkeep, it offers unmatched design flexibility. We can install grab bars and built-in benches to match whatever style you choose.
Which means you get to customize every single detail of your new wet area. From modern showerheads to built-in shampoo niches, we build it your way. Here is a quick comparison to help you decide on the best materials:
| Material Type | Maintenance Level | Installation Speed | Customization Options |
|---|---|---|---|
| High-Quality Acrylic | Very Low | Fast (1-2 Days) | Moderate (Preset Patterns) |
| Custom Tile Work | Moderate | Moderate (3-5 Days) | High (Endless Designs) |
| Solid Surface Panels | Low | Fast (2-3 Days) | Good (Smooth Colors) |
Naturally, you might worry about how long your bathroom will be out of commission. Our experienced team has perfected this specific layout transition to minimize disruption. We usually finish the entire physical swap in just a couple of days.
Initially, we carefully protect your floors and hallways before we demo the old cast iron or steel tub. We inspect the underlying subfloor and wood framing for any hidden water damage or rot. If we find any issues, we repair them immediately so your floor stays rock solid.
After that, our skilled plumbers update your drain lines and mixing valves to match the new layout. This ensures proper water flow and prevents annoying leaks behind your new walls. Once the plumbing is certified, we install the brand-new base and wall surrounds securely.
Now comes the fun part where you choose the finishing touches. A rain showerhead offers a luxurious daily experience that washes away all your stress. We can also add hand-held wands which make washing pets or cleaning the walls incredibly simple.
To assist you further, we offer heavy-duty grab bars that blend beautifully with your hardware. These do not look like clinical hospital bars at all. They look like high-end designer accessories while keeping you steady on your feet.
Consequently, you get a space that is both highly functional and gorgeous. We even offer slip-resistant flooring options to maximize your safety. You will feel secure every time you step inside to wash up.
Living out here in Mountrail County, North Dakota, you know how important reliable home service is. We are proud to serve communities across this beautiful region, including local areas near Stanley and New Town. Our team understands the unique needs of local homes and seasonal weather shifts.
Whether you live in ZIP codes like 58784, 58763, or 58775, we come directly to your doorstep. We know that many homes in this area have unique plumbing configurations. Our hands-on experience allows us to handle these old pipe systems without any unexpected delays.
With a local population of around 9,800 residents and a rising median household income of about $84,000, people here value quality work. We do not cut corners or use cheap materials that fail after a few winters. We deliver durable craftsmanship that protects your investment for decades to come.
To help you make the best decision, we want to be completely transparent. Swapping your only soaking tub for a walk-in stall is a big choice. Let us look at the real advantages and disadvantages of this project.
Clearly, the benefits include improved safety, easier access, and a more modern look. You also save a ton of space which can be used for extra storage. It is the perfect upgrade for empty nesters or anyone planning to age in place.
However, if you have toddlers or love taking long baths, losing your only tub might be tough. It can also slightly affect your home resale value if you do not have at least one tub left in the house. We always discuss these factors with you during our initial visit.
First, we sit down with you to look at your current bathroom layout. We take precise measurements of your existing fixtures so we know exactly what we are working with. This ensures your new walk-in base fits perfectly into the old footprint.
Next, we show you our catalog of beautiful wall panels, hardware finishes, and safety accessories. You get to touch the material samples and see how they look in your actual bathroom lighting. There is absolutely no pressure or pushy sales tactics here.
Finally, we provide you with a detailed, written estimate that covers all materials and labor. This quote is completely free and holds no obligation for you. We want you to have all the facts so you can make the right choice for your budget.
Why keep struggling with a high, dangerous tub wall when a safer option is one click away? Our professional team is ready to help you design the perfect walk-in setup. We take pride in our clean work, friendly service, and dependable results.
Contact us right now to schedule your free on-site consultation and quote. We will answer all your questions and help you plan your dream bathroom upgrade. Let us turn your old, drafty bathroom into a beautiful space you will love using every day!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote