Our Minooka crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Lackawanna County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of tripping over that high porcelain ledge every single morning. This daily frustration actually represents a fantastic opportunity to modernize your home and make your routine much safer. By swapping out that dusty old basin for a sleek walk-in design, you instantly open up your bathroom and gain precious square footage.
Naturally, making this change is much easier than you might think. Our dedicated team specializes in transforming these cramped washrooms into modern, open areas that feel like a private spa. We come right to your doorstep in Lackawanna County to evaluate your current setup and provide a complete, zero-cost estimate for the entire project.
Consequently, you do not have to live with an outdated, slippery setup any longer. Taking out that bulky obstacle and installing a low-profile base makes your daily routine feel effortless. You will love how much larger your room looks once we finish the job.
First of all, safety stands out as the biggest benefit for local homeowners. Stepping over a wet wall that rises nearly two feet off the floor is a recipe for a nasty slip. When we remove that barrier, you get a beautiful, low-threshold entry that keeps your feet firmly on the ground.
Additionally, cleaning becomes a breeze because we use high-quality, non-porous acrylic surrounds. You can finally throw away those harsh chemical scrubbers and stop hurting your back trying to reach deep corners. Which means you spend less time scrubbing grout lines and more time enjoying your peaceful home.
On top of that, your property value gets a nice little bump from this smart upgrade. Most modern buyers actually prefer a spacious, modern stall over a deep basin they will rarely use. This smart swap gives you immediate daily utility while securing a solid return on your investment down the road.
| Project Stage | What We Do | Your Direct Benefit |
|---|---|---|
| Demolition | Carefully remove the old iron or steel basin | Clean slate with zero damage to walls |
| Plumbing Prep | Inspect pipes and relocate the drain line | No hidden leaks or future water damage |
| Base Setting | Install a heavy-duty, slip-resistant pan | Maximum stability and easy step-in access |
| Wall Surrounds | Apply custom, waterproof acrylic panels | Modern look with absolutely no moldy grout |
Before we hammer a single tile, we protect your floors and hallways to keep your home pristine. Our crew works fast because we know how annoying it is to have your main washroom out of commission. We usually wrap up the messy part of the job in just a few days.
Next, our experienced installers inspect the exposed framing for any hidden water rot or mold. If we find soft wood behind those old greenboards, we fix it immediately so your new setup lasts for decades. This attention to detail prevents nasty surprises down the road.
Finally, we install the custom-fit acrylic panels and hook up your brand-new plumbing fixtures. We make sure the showerhead sits at the perfect height for you and your family. Once we seal the edges with industrial-grade silicone, your beautiful new oasis is ready for action.
Now, you get to have some real fun choosing the design details that match your personal style. We offer a wide range of gorgeous wall patterns, from classic subway tile designs to modern slate finishes. This lets you create a custom look without the heavy maintenance of real stone.
Furthermore, we can add built-in corner caddies and shaving ledges to keep your soaps organized. No more balancing shampoo bottles on narrow ledges where they constantly fall off. Everything you need will sit right at arm's reach in a secure, tidy spot.
To ensure total peace of mind, we highly recommend installing matching grab bars. These sturdy accessories do not look like cold, clinical hospital rails anymore. Instead, they feature beautiful finishes like brushed nickel and oil-rubbed bronze to blend seamlessly with your decor.
Besides those secure bars, we can also build a comfortable corner seat right into the wall system. This provides a stable place to relax while washing or shaving your legs. It is the ultimate upgrade for long-term comfort and independence in your own home.
Living in this lovely part of the state means dealing with hard water and older plumbing systems. Many homes in the 18506 neighborhood feature classic construction that requires a delicate touch and specialized plumbing knowledge. We understand the local housing stock and know exactly how to handle cast iron pipes and plaster walls.
Because we live and work nearby, we care about keeping our local neighborhoods beautiful and functional. Whether your home is near the historic railroad lines or closer to the newer developments, we treat your property with absolute respect. We handle all the local permits and disposal requirements so you do not have to worry about a thing.
Our friendly team always arrives on time and keeps a clean workspace throughout the entire remodel. We pride ourselves on clear communication and honest pricing with no hidden fees at the end. You get the high-quality craftsmanship you deserve from neighbors you can trust.
Naturally, every single bathroom is unique, which is why we never give generic guesses in writing. We need to look at your existing plumbing layout, the condition of your subfloor, and your choice of materials. This face-to-face visit ensures we give you a precise, binding quote that fits your budget.
During our quick visit, we will measure your space and show you physical samples of our top-tier materials. You can feel the quality of our acrylics and see how the colors look under your actual bathroom lights. This hands-on process helps you make the best decision for your home.
So, why wait to transform your daily routine into a much safer and happier experience? Contact us today to schedule your complimentary, in-home consultation with our friendly remodeling crew. We will answer all your questions and help you design the washroom of your dreams.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Minooka repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Lackawanna County; the statewide picture lives on Pennsylvania; the wider region is the Northeast; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote