Our Miller City crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Putnam County within days.
Written quote at no cost, one callback, no chasing afterwards.
Now you can finally toss out that old clunky basin that drains slower than a turtle on a lazy Sunday afternoon. Swapping your tall basin for a modern walk-in setup makes your daily routine faster and way safer!
Naturally, almost every home built a few decades back came with those deep porcelain tubs that seem specifically designed to trip you up every morning. Honestly, swinging your legs over a slippery two-foot wall while you are still half awake is just a recipe for disaster...
Actually, making the big switch to a flat floor stall brings massive perks for every single person living under your roof. Suddenly, your whole washroom feels gigantic because you do not have a huge block of colored plastic taking up half the floor space.
Moreover, cleaning becomes about ten times easier since you can finally say goodbye to scrubbing those gross bottom corners on your knees. Additionally, you will save a bundle on your monthly heating bill because running quick streams takes way less hot water than filling a massive vessel to the brim.
First, we come out to take a look at your current plumbing setup and get exact measurements of your alcove wall to wall. After that, we haul out the old heavy basin along with the rotten drywall hidden behind it.
Then, our crew carefully inspects the subfloor underneath to ensure no secret water damage is going to rot your floor joists out later on. Furthermore, we install a modern leak-proof sub-base along with heavy-duty PVC drainage pipe so water glides right down the line.
Next, brand new custom acrylic or stone pattern walls go up along with grab bars and built-in shelving cutouts. Finally, we seal up every single seam with premium silicone caulk that stops mold before it even thinks about growing behind your sparkling new tiles.
| Feature | Old School Water Basin | Modern Walk-In Stall |
|---|---|---|
| Accessibility | High step-over height creates massive tripping hazard daily | Low threshold or totally zero-barrier entry design |
| Maintenance Required | Endless scrubbing on knees with harsh chemical cleaners | Quick wipe down with non-porous stain-resistant walls |
| Water Usage | Fills dozens of gallons for one simple wash session | Uses direct target streams that cut utility bills fast |
| Visual Space | Makes tiny washrooms feel cramped and completely crowded | Opens up visual room and adds refined polish instantly |
Right away, we arrive directly at your residence to inspect your current layout and discuss what custom design choices fit your personal lifestyle. Because nobody wants a pushy salesperson sitting on their couch for hours, we keep our visit totally low-pressure and straight to the point.
Besides, we bring physical samples of high-grade acrylic wall panels, slip-resistant flooring textures and shiny modern hardware fixtures. Consequently, you get to feel the materials with your own hands before committing a single dime to the actual project.
Therefore, you receive a detailed written estimate on the spot with zero hidden surprises or mystery fees attached. Naturally, this gives you full freedom to figure out your home improvement budget without feeling squeezed into a hasty decision.
Surprisingly, choosing all the personal upgrades turns out to be the most fun part of the entire project! For instance, you can choose fold-down seating, corner caddies or even sliding glass doors that slide smooth as silk.
On top of that, textured flooring keeps your wet feet glued to the ground so slipping becomes a thing of the past. Beyond that, strategically placed grab bars can be painted to match your faucets so your space looks like a luxury hotel instead of a hospital room.
Likewise, multi-function spray wands let you rinse hard-to-reach places or wash down the walls after use with absolute ease. Ultimately, every single fixture gets tailored around how you like to refresh yourself every day.
Interestingly, living in a charming village of around 137 people inside Putnam County means small-town trust actually matters when hiring home contractors. With local median household income levels hovering near national averages in the 45864 ZIP codes zone, smart homeowners want renovation work that lasts for decades without costing a fortune.
As a matter of fact, older Midwestern homes around here often feature unique cast iron plumbing setups hidden inside older framing. Because of these unique quirks, hiring someone who knows local construction styles keeps your project running smoothly without unexpected mid-job pauses.
Luckily, updated properties in our region command fantastic resale value when you decide to put your house on the real estate market down the road. Consequently, transforming an outdated wash space into a modern sanctuary serves as both a daily pleasure and a rock-solid financial investment.
To be frank, those cheap plastic wall kits sold at big box retail stores always start peeling away after just a few hot months. Furthermore, water sneaks behind poorly installed seam lines and rots out your wall studs while hiding completely out of sight.
In contrast, our solid structural panels locking systems ensure water stays strictly inside the drain where it belongs. Plus, high-density materials resist chipping, scratching and yellowing even if you use heavy daily cleansers over many years.
Truthfully, doing the job right the very first time eliminates costly structural repairs down the road. So, taking advantage of a full replacement system gives you absolute mental calmness every time you turn the hot water tap handle.
Granted, having workers inside your personal residence can feel a bit noisy, but we strive to keep everything super tidy and quick. First, clear out your personal toiletries, towels and hanging rugs from the main washing area before our crew knocks on your front door.
Afterwards, we lay down heavy protective floor runners along your hallways to prevent mud or debris from touching your clean carpets. Then, our team brings in all specialized tools so we can tear down the old heavy basin efficiently without dusting up your whole floorplan.
Shortly after, we haul away every bit of old trash, broken tile and rusty piping so you never have to clean up after us. By evening, you are left with a pristine, functional wash station that looks like it belongs on a home improvement television show.
Obviously, folks often assume low-step wash stalls are only meant for older folks or people dealing with physical injuries. But actually, busy youngsters and energetic middle-aged adults fall in love with the fast access and simple upkeep just as much!
Besides, if you ever plan to stay in your beloved residence long into your golden years, making this change early eliminates future physical struggles completely. Furthermore, guests staying over at your house will constantly compliment how stylish and convenient your new wash space feels to use.
Definitely, taking away that dangerous knee-high hurdle creates a safer environment for every single family member who visits. Which means you can stop worrying about accidental slips and just enjoy your relaxing warm wash routine every morning.
Now is the perfect time to trade that dated cast iron water trap for a gorgeous modern setup tailored directly to your personal taste. Since our quotes cost absolute zero dollars and hold zero obligations, you have everything to gain and zero risks to worry about!
Simply reach out to our friendly team to reserve your convenient home visit right away. Afterwards, we will measure your space, show you top-quality material samples, and print out a clear budget estimate customized to your specific house.
Don't wait until another awkward slip happens in your old slick water basin! Claim your free project quote now and see how effortless upgrading your home can truly be!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Miller City repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Putnam County; the statewide picture lives on Ohio; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote