Bathtub To Shower Conversion

Bathtub To Shower Conversion in Melbourne, Florida (FL)

Our Melbourne crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Brevard County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
852
County
Brevard County
State
Florida
Region
South
Median income
$45,938
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Step into a Fresh and Safe Bathroom Experience Today

Your old, dusty tub probably takes up way too much space in your bathroom while also being a major pain to clean every single week. By swapping out that bulky basin for a modern walk-in enclosure, you instantly make your daily routine much safer and far more convenient. If you are ready to upgrade your home, we are right here to give you a free estimate on this amazing project.

Making this smart switch completely transforms how you use your space on a daily basis. Since nobody likes climbing over a high ledge when they are tired or sore, a low-profile entry offers the perfect solution. This change boosts your peace of mind while making your entire bathroom feel twice as big as it used to be.

Why Giving Up the Tub Makes Perfect Sense

Stepping over a high porcelain wall with wet feet is basically an accident waiting to happen. For this reason, replacing that old fixture with a modern walk-in setup keeps you safe from slips and nasty falls. Our team specializes in removing those slippery hazards and installing beautiful, low-maintenance walls that look incredibly sharp.

Think about how much water you actually waste when you fill up a giant basin compared to a quick rinse. Because of this, transitioning to a streamlined stall helps you save money on your monthly utility bills. You get to enjoy a gorgeous space while keeping your hard-earned cash in your wallet.

Cleaning grout lines on your hands and knees is honestly the worst chore in any household. Fortunately, our modern acrylic wall systems resist mold and mildew naturally, meaning you can finally throw away those harsh scrub brushes. A quick wipe with a microfiber cloth is all it takes to keep everything sparkling clean.

Tailoring the Space to Your Exact Needs

Every homeowner has a different daily routine, which is why we offer so many custom features for your new enclosure. For example, we can install sturdy grab bars, comfortable built-in seating, or custom shampoo niches to keep your bottles organized. These little additions turn a basic daily chore into a truly pleasant experience.

Choosing the right glass door is another way to make your bathroom look like a high-end luxury resort. Whether you prefer sliding bypass doors or a heavy glass bypass panel, we have options that fit your style. This means your bathroom will look exactly how you always pictured it in your dreams.

Let us look at some of the key differences to help you decide which setup works best for your home.

Feature Old Bulky Tub Modern Low-Threshold Enclosure
Step-In Height Around 15 inches to climb over Only 3 inches or less for safety
Maintenance Hard scrubbing on knees Quick wipe down with mild soap
Visual Appeal Outdated and takes up space Bright, open, and very modern

Our Simple and Stress-Free Process

Starting a home renovation project can feel a bit overwhelming if you do not know what to expect. That is why our friendly local crew takes care of every single detail from the very first measurement to the final cleanup. We treat your house with absolute respect, keeping the dust contained so you do not have to worry about a mess.

First, we sit down with you to look at your current layout and discuss what you want to achieve. After we understand your vision, our team provides a completely free estimate so you know exactly what the project costs. There are never any hidden fees or surprise upcharges with us.

Once we start the physical transformation, we work quickly to get your bathroom back in service as fast as possible. Since we prepare everything ahead of time, we can often finish the actual installation in just a couple of days. This means very little disruption to your busy life.

The Perfect Project for Local Homes

Living near the beautiful Indian River Lagoon means dealing with high humidity throughout the entire year. Because of this sticky weather, older bathrooms tend to trap moisture and develop mold behind those outdated tiles. Upgrading to a modern non-porous wall system prevents these hidden moisture issues from ruining your walls.

Whether you reside in a cozy neighborhood in Brevard County or own a property near the sunny coast, we know the local building codes inside and out. We proudly serve homeowners across the entire local area, including zip codes like 32901, 32902, 32904, and 32912. Our deep roots in this community mean we always deliver high-quality work that stands the test of time.

With a local population of 852 residents and a median household income of $45,938, we understand the importance of getting great value for your money. Investing in your home is a big decision, which is why we focus on durable materials that add real value to your property. You get a stunning bathroom that looks expensive without actually breaking your budget.

Frequently Asked Questions About the Transformation

How long does the installation process usually take?

Most of our projects take only one to three days to complete from start to finish. Since we plan everything out before we arrive, we minimize the downtime for your household. You will be back to using your brand-new space before you even miss your old setup.

Can this project help older family members stay independent?

Absolutely, because removing that high barrier makes entering the stall incredibly easy and safe. We can add textured non-slip floors and heavy-duty grab bars to provide extra stability. This lets your loved ones bathe with confidence without needing constant assistance.

What materials do you use for the new walls?

We use high-quality acrylics and composite materials that look just like real stone or luxury tile. These materials are completely non-porous, meaning they do not trap dirt, soap scum, or mold. You get the beauty of high-end materials without any of the annoying maintenance.

Get Your Free Estimate Today

Do not spend another day struggling with an outdated, hard-to-clean bathroom that does not fit your lifestyle. By taking action right now, you can transform your space into a bright oasis of safety and convenience. Our friendly team is ready to visit your home and show you all the amazing design options available.

We believe in honest pricing, which is why our on-site consultations and quotes are completely free of charge. You can ask us all your questions and get a clear plan without any pressure to buy. Reach out to us today to schedule your visit and take the first step toward the bathroom you deserve!

Why the tub goes in Melbourne

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Melbourne

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Melbourne

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Melbourne

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Melbourne

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Melbourne repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Melbourne

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Melbourne in short

StandingIncorporated place
Population852
ZIP codes32901, 32902, 32904 +7 more
Land area44.2 sq mi
Density19 per sq mi
Median income$45,938

For the bigger map: county seat pages start at Brevard County; the statewide picture lives on Florida; the wider region is the South; background reading sits on Wikipedia.

Bathrooms we convert around Melbourne

Conversions booked across Florida

One three-day job stands between this bathroom and its best fixture.

Get my free quote