Bathtub To Shower Conversion

Bathtub To Shower Conversion in Mattoon, Wisconsin (WI)

Our Mattoon crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Shawano County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
443
County
Shawano County
State
Wisconsin
Region
Midwest
Median income
$40,000
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Ditch the Deep Tub for a Modern Walk-In Upgrade

Maybe you are tired of stepping over that high porcelain ledge every single morning just to wash your hair. Truly, clambering into a deep basin feels more like an obstacle course than a relaxing routine, especially when you are half-asleep. This handy home upgrade swaps your old, unused tub space for a sleek, spacious walk-in stall that actually fits your busy lifestyle.

Fortunately, our local team brings all the tools and expertise right to your doorstep in Shawano County to make this swap incredibly easy. Choosing this modern bathroom remodel means you finally get to enjoy a safer, more accessible bathing area without the hassle of a full-scale home renovation. We come directly to your house to measure your space, discuss your layout ideas, and hand you a free estimate on the spot.

While some folks worry about losing their soaking basin, the reality is that most busy people almost never use them anyway. Because of this, converting that bulky footprint into a modern walk-in setup maximizes your floor space and gives your bathroom an open, airy feeling. You will love how much larger your room looks once we tear out that outdated wall-to-wall barrier.

Why Homeowners Are Making the Switch

First of all, safety is a massive deal for everyone from young kids to grandparents. Stepping over a wet, slippery ledge that sits a foot and a half off the ground is a recipe for a nasty slip. By installing a low-profile basin instead, you reduce your trip risk to almost zero, which brings incredible peace of mind to your household.

On top of that, cleaning a giant basin is absolute torture on your back and knees. Think about those weekends you spent scrubbing grime out of the corners of an old acrylic basin while kneeling on a hard floor. Our new solid-surface walls and sleek bases wipe clean with a simple cloth, meaning you get to throw away those harsh chemical scrubbers forever.

Naturally, your home value gets a nice little bump when you update these crucial wet areas. Modern buyers actively look for sleek, accessible walk-in options rather than outdated, yellowed fiberglass tubs. This smart upgrade keeps your property competitive and stylish, which is a great bonus if you ever decide to sell down the road.

An Inside Look at Our Seamless Process

To begin, we sit down with you for a friendly chat to understand exactly what style and features you want. We take precise laser measurements of your current alcove to ensure your new components fit like a glove. This custom approach prevents any nasty surprises once we start the demolition phase.

Next, our skilled crew carefully removes your old cast iron or steel basin without damaging the surrounding drywall. We inspect the underlying subfloor for any hidden water damage or mold that might have leaked through old grout lines over the years. This crucial step ensures your home remains structurally sound and healthy for decades to come.

Finally, we run your new copper plumbing lines, position the drain, and install your gorgeous new wall panels and fixture hardware. Because we specialize in this exact transition, we usually wrap up the entire physical installation in just a couple of days. That means you will not have to deal with a messy, dusty construction zone in your house for weeks on end.

Comparing Your Old Basin with a Modern Walk-In Setup
Feature Your Old Traditional Basin Your New Walk-In Setup
Step-In Height Usually 14 to 18 inches high Only 3 to 5 inches high
Cleaning Time Hours of scrub work Quick wipe down
Visual Space Bulky and crowd-inducing Open, bright, and modern
Safety Level High slip and fall risk Very secure and accessible

Customizing Your New Oasis to Fit Your Style

Now, let us talk about the fun part, which is picking out all your personalized upgrades. You can choose from gorgeous textured wall panels that look exactly like expensive subway tile or natural marble without any of the high-maintenance grout lines. Adding a built-in corner bench or a fold-down seat provides extra relaxation and comfort while you rinse off.

Specifically, we offer high-end fixtures like rain showerheads, sliding hand-held sprayers, and sturdy grab bars that blend beautifully with your hardware. These small additions turn your daily routine into a spa-like escape that feels customized just for you. Which means you get to enjoy a touch of luxury every single morning before you head out the door.

Additionally, we install premium glass doors with special water-repellent coatings that keep spots from forming. If you prefer an even more accessible layout, we can design a barrier-free roll-in entry with a simple curtain rod setup. This flexibility allows us to build a space that works perfectly for your body and your budget.

Local Expertise Right Here in Mattoon Wisconsin

We are proud to serve our small, close-knit community nestled in the beautiful countryside of Mattoon, Wisconsin. Living in a cozy town with a population of about 443 means we treat every single client like our next-door neighbor. We understand the local home styles and the unique needs of families living in this peaceful corner of Shawano County.

With a local median household income of around $40,000, we know how important it is to get real, honest value for your hard-earned money. That is why we offer transparent pricing and durable materials that stand up to our freezing Midwestern winters. Whether you reside right near the heart of town or in the surrounding countryside of the 54450 ZIP code area, we are ready to drive out to your property.

Our team takes great pride in showing up on time, keeping our work area clean, and answering all your questions with a smile. We do not use pushy sales tactics or hidden fees, just honest craftsmanship from folks who care about our community. You can trust us to treat your home with the utmost respect from start to finish.

Frequently Asked Questions About Bathroom Swaps

How long does the actual installation take?

Most of our projects take only two to three days to complete from the moment we demo your old basin to the final cleanup. We work efficiently to minimize disruption to your daily routine because we know how tough it is to live without a bathroom. Our crew stays focused on your job until it is completely finished and looking perfect.

Can you convert a corner tub layout?

Absolutely, we can easily adapt almost any existing layout to fit a gorgeous new walk-in stall. We adjust the plumbing and wall surrounds to match the specific dimensions of your corner alcove seamlessly. This lets you reclaim wasted floor space and makes your entire bathroom feel much more open.

Do I need to hire a separate plumber?

No, you do not have to worry about coordinating different contractors because our team handles everything from start to finish. We take care of the demolition, the plumbing adjustments, the wall installations, and the final cleanup ourselves. This full-service approach saves you time, money, and a massive amount of planning stress.

Get Your Free Estimate Today

Why wait another day to turn your cramped, outdated bathroom into the modern space you deserve? Taking care of this upgrade now prevents potential slips and makes your daily routine infinitely more enjoyable. We make the entire process incredibly simple, starting with a friendly, no-pressure consultation right in your living room.

Our team will look at your current setup, listen to your ideas, and provide a detailed, written quote completely free of charge. You have absolutely nothing to lose by exploring your options and seeing how affordable this transformation can be. Contact us today to schedule your free estimate and take the first step toward a safer, more beautiful home.

Why the tub goes in Mattoon

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Mattoon

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Mattoon

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Mattoon

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Mattoon

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Mattoon repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Mattoon

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Mattoon in short

StandingIncorporated place
Population443
ZIP codes54450
Land area1.6 sq mi
Density272 per sq mi
Median income$40,000

For the bigger map: county seat pages start at Shawano County; the statewide picture lives on Wisconsin; the wider region is the Midwest; background reading sits on Wikipedia.

Bathrooms we convert around Mattoon

Conversions booked across Wisconsin

One three-day job stands between this bathroom and its best fixture.

Get my free quote