Bathtub To Shower Conversion

Bathtub To Shower Conversion in Martin, Georgia (GA)

Our Martin crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Stephens County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
546
County
Stephens County
State
Georgia
Region
South
Median income
$43,412
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Ditch the Old Deep Basin for a Modern Walk-In Setup

Maybe you feel tired of stepping over that high, slippery ledge every single morning just to wash off the sleep. This daily hurdle can turn your morning routine into a dangerous balancing act that nobody really wants to perform. By swapping that clunky, outdated tub for a sleek and level entry space, you instantly create a safer way to get clean.

Actually, making this change frees up an incredible amount of physical space in your bathroom. Because let us face it, those old cast iron basins take up way too much room while barely offering enough space to stand comfortably. Your whole room suddenly feels twice as big and looks incredibly modern when you remove that giant barrier.

If you are ready to upgrade your home, our team comes directly to your house to measure your space and hand you a complimentary estimate. This free quote gives you the exact details you need without any pressure. You get to see how simple it is to transform your daily routine into something much safer and way more enjoyable.

Why Swapping Your Tub Makes Perfect Sense

First of all, cleaning a deep, curved basin is absolute torture on your lower back and knees. This frustrating chore disappears when you switch to a flat, easy-to-reach floor surface with smooth wall panels. Which means you spend way less time scrubbing gross soap scum on your hands and knees and more time actually relaxing.

On top of that, water damage often hides behind those old, cracked tile walls that surround your current setup. Our crew inspects the underlying structure during the tear-out phase to make sure everything stays dry and mold-free for decades. Consequently, you protect the structural integrity of your home while getting a gorgeous upgrade that lasts.

Then there is the sheer convenience of stepping into a spacious stall designed just for standing and washing. This setup lets you add cool features like built-in benches, recessed niches for your shampoo bottles, and sturdy grab bars that do not look like they belong in a hospital. You get to customize every single detail to fit your personal taste and daily needs.

Feature Upgrade Concrete Benefit for You
Low-profile threshold Prevents trips and slips for everyone in your house
Non-porous acrylic walls Stops mold growth and eliminates hard scrubbing
Integrated storage shelves Keeps all your bottles organized and off the floor
Handheld showerheads Allows easy rinsing and effortless cleaning of the stall

What to Expect During the Transformation Process

Naturally, you might worry about your home turning into a chaotic, dusty construction zone for weeks on end. Fortunately, our seasoned crew specializes in quick turnarounds that minimize disruption to your household schedule. We work fast and clean up every speck of dust before we pack up our tools.

Initially, we carefully protect your floors and haul away your heavy, outdated basin without damaging your doorways. After that, we inspect the exposed plumbing lines to ensure your drain alignment is perfect for the new low-threshold pan. This careful attention to detail prevents future leaks that could ruin the ceiling below your bathroom.

This lets you enjoy a seamless installation where the new wall surrounds and fixtures fit together like perfect puzzle pieces. To make sure you love the result, we only use high-grade materials that resist cracking, chipping, and fading over the years. Your investment stays looking brand new even after years of daily use by a busy family.

Tailoring the Space to Your Unique Style

Moreover, you do not have to settle for a boring, cookie-cutter look that resembles a cheap motel room. We offer an incredible variety of colors, textures, and patterns that mimic high-end stone or classic subway tile. This variety allows you to design a personalized sanctuary that elevates your mood every time you walk through the door.

Besides the beautiful aesthetics, we focus heavily on the practical safety features that protect your loved ones as they age. Installing a slip-resistant floor surface gives you total peace of mind when the floor gets wet and soapy. This simple addition makes a massive difference for young kids and older relatives alike.

Indeed, this specific upgrade is one of the smartest ways to increase the overall market value of your property. Most modern home buyers actively look for houses that already have spacious, walk-in washing areas instead of old, unused soaking tubs. You get to enjoy the luxurious convenience now while building solid equity for the future.

Proudly Serving Our Local Community

Living in Stephens County means you deserve a reliable, local contractor who understands the unique homes in this beautiful area. We love driving out to assist our neighbors in a community of about 546 residents who value honest work and fair prices. Our team knows the local building codes inside and out, which keeps your project fully compliant.

Whether you reside in a cozy historic home or a newer property near ZIP code 30557, we bring our mobile showroom to your doorstep. We know that the median household income here is around $43,412, so we always focus on budget-friendly solutions that do not sacrifice quality. You get premium results without paying big-city prices.

To make things even better, our local presence means we are always nearby if you ever need quick adjustments or follow-up service. We treat your home with the exact same respect we show to our own families. Working with us means supporting local workers who take immense pride in improving the daily lives of their neighbors in Martin, Georgia.

Your Journey to a Beautiful Bathroom Starts Now

Perhaps you have been putting this project off because the decision-making process feels a little bit overwhelming. Honestly, taking the first step is incredibly simple when you let our friendly team handle all the heavy lifting and planning. We guide you through every choice, from plumbing fixtures to wall designs, with zero stress.

This lets you skip the guesswork and get a clear, honest breakdown of the entire project cost up front. We believe in total transparency, so you will never find hidden fees or surprise charges on your final bill. Our free estimate are completely detailed and easy to understand for any homeowner.

So why keep struggling with that awkward, outdated tub when you could step into a gorgeous, modern oasis every single morning? All you need to do is reach out to us today to schedule your complimentary, on-site consultation. Let us show you how affordable and simple it is to bring your dream bathroom to life.

Why the tub goes in Martin

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Martin

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Martin

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Martin

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Martin

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Martin repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Martin

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Martin in short

StandingIncorporated place
Population546
ZIP codes30557
Land area2.5 sq mi
Density217 per sq mi
Median income$43,412

For the bigger map: county seat pages start at Stephens County; the statewide picture lives on Georgia; the wider region is the South; background reading sits on Wikipedia.

Bathrooms we convert around Martin

Conversions booked across Georgia

One three-day job stands between this bathroom and its best fixture.

Get my free quote