Our Las Palomas crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Sierra County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, slippery wall every single morning just to wash up. Right now, your outdated bathroom setup probably takes up way too much space while serving very little purpose. That is why replacing that clunky basin with a sleek, open stall makes so much sense for your daily routine.
Suddenly, your morning starts with an easy step onto a flat, secure surface. By choosing this smart upgrade, you instantly create a safer environment and open up the entire layout of your room. Honestly, nobody actually has time for long baths anymore in our busy lives.
Fortunately, our local team specializes in making this exact swap happen fast without any stress. We believe in honest work and would love to visit your home to give you a detailed, zero-obligation estimate today.
Think about how much water you actually waste trying to fill up a giant basin. When you switch to a modern stall, you save on utility bills because showering uses significantly less water. On top of that, cleaning a flat wall is a million times easier than scrubbing grime out of deep porcelain corners.
This simple change also gives you a massive boost in bathroom safety. Since slip-and-fall accidents happen so often on wet edges, removing that tall barrier protects everyone in your household. Which means you can wash with complete peace of mind every single day.
To help you compare the two options, we put together a quick look at how they stack up:
| Feature | Old Basin Setup | Modern Walk-In Stall |
|---|---|---|
| Safety Level | Low (high step-over height) | High (low-profile threshold) |
| Cleaning Effort | High (lots of bending and scrubbing) | Low (wipe-down walls and glass) | Space Utilization | Bulky and cramped | Open and airy feel |
Now, look at how much better your bathroom could look without that heavy old block in the corner. You get a fresh start with modern materials that resist mold and stay bright for years. Our friendly crew handles the heavy lifting so you do not have to break your back.
Perhaps you want a built-in seat to relax while the warm water washes over you. This lets you customize every single detail, from the color of the wall panels to the exact placement of the soap dishes. You can even choose gorgeous glass doors that slide open smoothly without making a sound.
Plus, we install sturdy grab bars that look incredibly stylish while keeping you steady on your feet. These features blend perfectly into the design so your bathroom looks like a high-end spa rather than a cold hospital room. We focus on bringing ultimate coziness and practical style to your home.
If you want to explore the possibilities, our estimator will bring samples right to your door. We sit down with you to plan a layout that fits your budget and your style perfectly. You will see how easy it is to transform your daily routine with the right design choices.
Acrylic wall systems offer a fantastic way to get a tile look without the nightmare of cleaning dirty grout lines. Because these non-porous materials resist buildup, you spend less time scrubbing on your weekends. That means more time enjoying your home and less time on your knees with a brush.
On the other hand, traditional tile still offers that classic, high-end look if you prefer a custom stone appearance. We install both options with expert care to ensure everything remains completely watertight. Our main goal is protecting your home from hidden water damage.
Installing a rainfall showerhead transforms a quick rinse into a truly luxurious experience. This lets you enjoy high water pressure while actually using less water overall. You get the best of both worlds without feeling guilty about your utility bill.
Additionally, handheld sprayers make washing pets or cleaning the stall walls incredibly simple. These smart additions add real value to your home and make daily chores a breeze. We help you pick the perfect fixtures that match your style and needs.
First, we protect your floors and walls before we even touch a single tool. Our crew respects your property and keeps the work area clean from start to finish. We know how annoying home construction can be, so we work quickly to minimize any disruption.
Next, we carefully remove your old cast iron or fiberglass basin without damaging the surrounding structure. Once the old unit is out, we inspect the underlying wood and plumbing to make sure everything is rock solid. If we find any hidden rot, we repair it properly before moving forward.
Finally, we install your brand-new slip-resistant base and gorgeous waterproof walls. We seal every joint with commercial-grade silicone to prevent any future leaks. Before we leave, we clean up every speck of dust so your new space is ready to use immediately.
Living out here in New Mexico, you know how important it is to work with folks who understand our local community. We proudly serve the quiet area of Las Palomas, where our neighbors value honest handshakes and quality craftsmanship. With a tiny population of around 306 people in this beautiful part of the state, word of mouth means everything to us.
Whether you live near the river or closer to the highway in ZIP code 87901, we treat your home like our own. We know the local water conditions and building styles, which helps us choose the absolute best materials for your project. Our local household income levels mean we always focus on providing real value for every hard-earned dollar.
Because we are local, we do not charge crazy travel fees or make you wait weeks for an appointment. We are just a quick drive away and always ready to help our neighbors upgrade their homes. Supporting local businesses keeps our community strong and ensures you get personal, friendly service every time.
Why keep struggling with an old, ugly basin when a beautiful new setup is one click away? Our team is ready to help you design a space that brings daily joy and refinement to your home. You deserve a bathroom that works for you, not against you.
We make the entire process easy by offering completely free, no-pressure consultations right at your house. We measure your space, show you beautiful design options, and give you a clear price that fits your budget. There are never any hidden fees or surprise charges when you work with us.
Take the first step toward a safer, more beautiful home by requesting your free quote today. We look forward to meeting you and helping you build the bathroom of your dreams!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Las Palomas repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Sierra County; the statewide picture lives on New Mexico; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote