Across Kenedy County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
You can easily transform your daily wash routine into a much safer and faster experience.
Many homeowners struggle with those high tub walls that feel like climbing a mountain every single morning.
By swapping that bulky basin for a sleek walk-in enclosure, you instantly reclaim your space and peace of mind.
When you make this change, your entire bathroom suddenly looks twice as big as before.
This clever swap removes a major tripping hazard while giving you a stylish area to wash away the day.
Our local team visits your home to measure everything and provides a free estimate for the project.
Think about how much easier your mornings will become when you can just step right onto a flat floor.
No more slipping on wet porcelain edges or balancing on one foot while holding onto a towel bar.
We specialize in these custom wet-area transformations and love helping folks upgrade their homes.
First of all, you will save a massive amount of cleaning time because modern wall surrounds lack those annoying grout lines.
Old tile setup absorbs grime and mildew like a sponge, which forces you onto your hands and knees with a scrub brush.
New non-porous acrylic or composite materials resist mold growth so you only need a quick wipe to keep things sparkling.
Besides saving your back during cleaning, this upgrade makes your bathroom incredibly accessible for everyone in the household.
If you plan to stay in your home long-term, preparing your space now prevents costly emergency renovations down the road.
Adding features like built-in seating, grab bars, and low-profile thresholds keeps you independent and safe in your own home.
Let us look at some of the main differences between these two setups to help you decide what fits your life best:
| Feature | Old High-Wall Basin | Modern Walk-In Setup |
|---|---|---|
| Step-In Height | Usually 14 to 18 inches high | Only 1 to 3 inches from the floor |
| Water Usage | Requires 40 to 80 gallons to fill | Uses far less water per wash |
| Cleaning Effort | High scrub demand due to deep corners | Low maintenance with wipe-clean walls |
| Floor Space | Feels cramped and takes up visual room | Creates an open, airy feeling |
Additionally, this upgrade boost the overall value of your property if you ever decide to sell it.
Most modern buyers prefer a spacious stall over an old basin they will likely never use for soaking.
We can help you plan this transition seamlessly so you get the exact layout you want.
Initially, our crew protects your floors and walls before we touch a single piece of your existing plumbing fixture.
We carefully extract the old cast iron or steel basin without damaging the surrounding drywall or structural framing studs.
This part of the job requires serious muscle and experience, which is why having professionals handle it is so important.
Next, we inspect the subfloor underneath for any hidden water damage or rot that needs fixing before proceeding.
Catching these issues early saves you thousands of dollars in structural repairs later on.
Once the foundation is solid, we upgrade the drain location and install the new heavy-duty pan securely.
Following that, we install the waterproof wall panels and connect your brand-new showerhead and mixing valve.
We seal every single joint with premium silicone to guarantee a completely watertight finish that lasts for decades.
You can choose from various textures and colors to match your style and achieve absolute coziness.
To start, you need to decide between high-quality acrylic panels or traditional ceramic tiles for your new walls.
Acrylic offers a seamless look that prevents leaks and requires almost zero maintenance from you over the years.
On the other hand, tile allows for endless customization but demands regular sealing to keep the water out.
Because we want you to love your space, we also offer slip-resistant flooring textures for maximum safety.
This feature gives your feet a solid grip even when the surface is covered in soapy water.
Adding a glass door instead of a plastic curtain keeps the warmth inside and prevents puddles on your floor.
Mainly, safety features do not have to look like they belong in a cold, sterile hospital room anymore.
Modern grab bars come in beautiful finishes like brushed bronze and matte black to complement your designer fixtures.
This means you get supreme physical support without sacrificing the beautiful aesthetic of your newly remodeled room.
Furthermore, we can install a comfortable corner seat or a fold-up bench for an extra touch of relaxation.
This setup allows you to sit down comfortably while washing, which is perfect for anyone with balance or joint issues.
We also position your shelves and shampoo caddies at the exact height you need so everything stays within arm's reach.
If you live in the vast coastal plains of Kenedy County, Texas, you know how important durable home improvements are.
Our region has a unique charm, with a tiny local population of under several hundred residents who value hard work and quality.
Whether you reside near the sprawling ranch lands or closer to the gulf breeze, we bring our expertise directly to your door.
Naturally, you might worry about the initial cost of making such a significant change to your home.
However, when you calculate the water savings and the prevention of dangerous falls, the investment pays for itself.
A safer bathroom allows you or your loved ones to age in place comfortably without needing expensive assisted care.
To help you get started, our friendly team offers a completely transparent pricing process with no hidden surprises.
We sit down with you, look at your current layout, and discuss your goals to find the perfect fit.
This ensures you get a realistic plan tailored to your budget and your daily routine.
Promptly, our professional crew arrives on time with all the tools and materials needed for a swift installation.
We work efficiently to minimize disruption to your household so you can go about your day normally.
Most of our projects take just a couple of days to complete from demolition to the final cleanup.
Before we leave, we test every pipe and drain to make sure the water flows perfectly and safely.
We also clean up the work area thoroughly, leaving your home just as neat as we found it.
Our goal is to make the entire experience stress-free and exciting for you from start to finish.
So, are you ready to ditch that old, dangerous tub and enjoy a bright, open, and modern washing space?
Reach out to us today to schedule your consultation and get your 100% free project quote.
We are excited to help you design a beautiful space that makes your life easier and safer every day!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote