Across Jefferson County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
If you are tired of climbing over a tall, slippery ledge just to wash up every morning, you are not alone. Transitioning your old soaking basin into a modern walk-in stall will instantly make your daily routine safer and much faster. Let us show you how we can transform your space today with our professional hands-on help.
Honestly, nobody actually has time for long baths anymore in our busy world. Most of us just want to jump in, get clean, and get moving with our day. By swapping that old cast-iron monster for an open, low-profile stall, you gain a massive amount of physical space in your room. This means you will finally stop banging your elbows against the walls while you wash your hair.
That old porcelain basin also presents a serious tripping hazard for everyone in your home. Getting rid of that high barrier protects your knees and keeps you from slipping on wet tile. It is a simple upgrade that makes a huge difference for your daily peace of mind.
Our local team specializes in removing these bulky fixtures and installing beautiful, watertight bases in their place. We handle the heavy lifting so you do not have to break your back. We will even haul away the old junk so your home stays clean during the process.
Think about how much easier your weekly cleaning routine will become after this change. Old basins have deep corners that collect soap scum and nasty mildew like a magnet. A fresh, flat pan with modern wall panels wipes down in just seconds with a basic squeegee. This saves you hours of painful scrubbing on your hands and knees every single week.
To help you understand the real differences between these two setups, we created a handy comparison table below.
| Feature | Old Deep Basin | New Walk-In Stall |
|---|---|---|
| Step-In Height | 15 to 20 inches | Under 3 inches |
| Cleaning Effort | High (lots of bending) | Low (wipe and go) |
| Visual Space | Cramped and bulky | Open and bright |
Besides the easy maintenance, you will notice that your room suddenly looks twice as big as it did before. Glass doors let light flow through the entire space instead of cutting it in half with a dark curtain. This visual trick turns a tiny, dark washroom into a bright sanctuary you actually enjoy using.
Every home has a unique style, which is why we offer so many custom options for your upgrade. You can choose from gorgeous stone-look patterns, classic subway tile designs, or simple white panels that match any decor. This lets you design a space that feels personal and fits your budget perfectly.
We also install handy accessories like built-in corner shelves, sturdy grab bars, and comfortable fold-down seating. These additions keep your shampoos organized and give you extra stability when things get slick. You get to decide exactly where everything goes so the setup works best for your height.
Our experienced crew knows how to align the new drain with your existing floor pipes without destroying your floorboards. This technical precision prevents costly plumbing leaks down the road. We make sure everything flows smoothly before we consider the job finished.
You might worry that remodeling will leave you without a washroom for weeks on end. Thankfully, our streamlined process allows us to complete most of these transformations in just a couple of days. We show up on time, protect your flooring with heavy drop cloths, and work quickly to minimize disruption.
First, we carefully dismantle the old structure and inspect the wood framing underneath for any hidden water damage. If we find moldy studs, we repair them immediately so your new walls have a solid, healthy foundation. This step is crucial for preventing structural issues years later.
Next, we install the new acrylic or composite pan and seal it tightly against the subfloor. After that, we mount the waterproof wall surrounds and hook up your brand-new showerhead and temperature controls. This careful sequence ensures a leak-free setup that lasts for decades.
Many buyers these days actively look for homes that feature modern, accessible walk-in stalls instead of outdated tubs. Making this change now boosts your property value and makes your house much easier to sell later. It is one of the smartest home improvement projects you can choose for a high return on investment.
This is especially true here in Jefferson County, Indiana, where many charming older homes feature outdated bathroom layouts that need a modern touch. Whether you live in a historic property or a newer build, updating this single feature makes the whole house feel brand new. Our local community deserves quality craftsmanship that stands the test of time.
We love helping our neighbors improve their daily lives with these quick, affordable renovations. We know the local building codes inside and out, so you never have to worry about permits or compliance issues. We handle every single detail of the project from start to finish.
Are you ready to stop struggling with your old tub and start enjoying a spacious, modern walk-in setup? We make the entire process incredibly easy by coming directly to your home to look at your space. We will measure your current layout and discuss all the design options that fit your personal style.
During this visit, we will provide you with a completely free, no-obligation written quote for the entire project. This means you will know the exact cost upfront without any hidden fees or surprise charges later. We believe in honest, transparent pricing for all our neighbors.
Contact us today to schedule your free home consultation and take the first step toward a safer, more beautiful home. Our friendly team is ready to answer your questions and help you design the perfect washroom. Let us do the hard work while you sit back and enjoy the amazing results!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote