Our Jal crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Lea County within days.
Written quote at no cost, one callback, no chasing afterwards.
You might feel tired of climbing over that tall acrylic ledge every single morning just to get a quick wash.
This common issue plagues many homes where old-school iron basins take up way too much precious square footage.
We can help you swap that outdated setup for a sleek and spacious entry system that fits your daily routine perfectly.
Our team specializes in removing those dusty cast-iron relics and building gorgeous, low-barrier wash areas in their place.
This process instantly opens up your floor plan and makes your daily routine feel much more like a high-end spa day.
By getting in touch with us today, you can secure a free in-home estimate to see how easy this transition really is.
Many homeowners realize that their old deep-soaking basins simply gather dust and laundry piles instead of water.
Which means you are wasting valuable square footage on a feature you do not even use anymore.
Swapping that bulky unit for a modern pan with glass doors lets you reclaim your room and enjoy a breezy routine.
Safety plays a massive role in this decision for folks who plan on staying in their properties for the long haul.
Stepping over a tiny three-inch threshold is infinitely safer than balancing on a slippery, curved porcelain edge.
This simple change protects your joints and gives you total peace of mind every time you turn on the hot water.
On top of that, cleaning a flat wall surround takes a fraction of the time compared to scrubbing old grout lines.
You will spend less time on your knees with a harsh brush and more time actually enjoying your beautiful home.
Our high-quality acrylic panels resist mold and keep their shine without requiring any intense physical labor from you.
First, we come out to look at your existing plumbing layout and measure the exact footprint of your current setup.
This step ensures we catch any hidden water damage behind your drywall before we place your brand-new pan.
We always keep things transparent so you know exactly what the job requires from the very start.
Next, we carefully extract the old heavy basin without tearing up the surrounding structure of your home.
Our crew works fast to minimize dust and noise so your daily life keeps running smoothly.
We haul away the heavy debris ourselves so you do not have to worry about renting a dumpster.
Finally, we install your custom slip-resistant base along with beautiful, waterproof wall panels that reach your ceiling.
This tight seal prevents moisture from invading your wooden studs and causing expensive structural problems down the road.
You get a gorgeous, durable wash zone that looks incredible and performs even better for decades to come.
To help you visualize how this process works, look at this quick comparison of your options:
| Feature | Old Bulky Basin | Modern Low-Threshold Walk-In |
|---|---|---|
| Step-In Height | Typically 14 to 18 inches | Usually 3 to 5 inches |
| Required Floor Space | Feels cramped and blocky | Creates an open, airy feeling |
| Maintenance Level | High scrubbing, lots of corners | Wipe-and-go acrylic surfaces |
Choosing your new fixtures allows you to express your personal style while adding serious utility to your daily life.
You can opt for built-in corner caddies to keep your shampoos and soaps organized and off the floor.
This ensures your soap bars stay dry and your space remains free of cluttered plastic racks.
Adding a sturdy bench or a fold-down seat provides an extra layer of relaxation during your warm washes.
This feature helps anyone who prefers to sit down while shaving their legs or relaxing under the warm spray.
We anchor these seats directly into the wall framing so they support weight safely and securely without wobbling.
Choosing stylish grab bars does not mean your home has to look like a sterile local medical facility.
Modern hardware comes in gorgeous finishes like matte black and brushed gold to match your beautiful vanity faucets.
These subtle safety features blend right into the design while offering a solid handhold whenever you need it.
Our dedicated team loves visiting homes in this vibrant corner of Lea County to deliver top-notch craftsmanship.
We understand the unique home styles found throughout the 88252 ZIP code and how to update them properly.
With a local population of 2,032 residents, we treat every single client like our close neighbor.
Many households here enjoy a solid median household income of $56,453 and want to invest wisely in their properties.
Upgrading your main washroom is one of the smartest ways to boost your overall home equity quickly.
We work efficiently to deliver premium results that respect your hard-earned budget and your busy schedule.
Living out in this beautiful desert region of New Mexico means dealing with hard water that leaves spots.
Our non-porous wall systems fight off those stubborn calcium deposits much better than traditional ceramic tile.
This means your washroom stays looking brand new even with our local water mineral content.
Taking the first step toward your dream washroom is much simpler than you might think.
We offer completely complimentary consultations where we sit down and discuss your design ideas face-to-face.
This allows us to give you an accurate price estimate without any hidden fees or surprise upcharges later.
During our visit, we bring material samples so you can see and feel the high quality of our panels.
You can mix and match different stone patterns and tile looks to find the perfect style for your home.
This hands-on experience takes the guesswork out of remodeling so you can move forward with total confidence.
Do not spend another week struggling with an outdated and hazardous layout that does not serve your lifestyle.
Fill out our quick online form today to request your free quote and start your home transformation.
We look forward to helping you build a safer, more beautiful space that you will love using every single day.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Jal repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Lea County; the statewide picture lives on New Mexico; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote