Our Hunter crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Campbell County within days.
Written quote at no cost, one callback, no chasing afterwards.
Honestly speaking, stepping over a slippery porcelain barrier every morning is plain annoying. Right now, replacing that old basin with a modern walk-in base gives you instant peace of mind. Actually, getting a free estimate today will help you save big bucks on your upcoming remodel.
To start with, those high edges are pretty tricky to step over when you are half asleep. Frankly, switching to a low-barrier pan completely eliminates that pesky tripping hazard for your entire family. Because of this, your morning routine becomes way smoother and much faster.
Additionally, giant tubs end up wasting tons of precious floor space in small rooms. Naturally, converting that spot into a vast standing area gives you room to stretch out. Consequently, your daily rinse feels like a luxury spa experience without moving any main walls.
Besides that, scrubbing old grout lines down on your hands and knees stinks real bad. Truthfully, modern solid acrylic walls resist gross mold and dark mildew naturally. Therefore, you spend way less time cleaning and much more time just relaxing.
First off, a local builder comes out to look at your existing plumbing layout. During this visit, we measure your stall area down to the exact fraction of an inch. After that, we check for hidden water damage behind your old wall panels.
Next up, the crew carefully tears out the bulky cast iron or fiberglass shell. To be fair, this demolition part gets a little dusty and noisy for a couple hours. However, we haul away all the heavy trash so your driveway stays spotless.
Then, we upgrade your old floor drain to handle fast water runoff properly. Meanwhile, fresh greenboard drywall goes up to protect your home against future moisture problems. Finally, your custom pan and non-porous walls get glued down super tight.
Initially, you need to pick a base material that fits your tight personal budget. For example, reinforced acrylic pans are crazy durable and hold warmth exceptionally well. What this means for you is a floor that never feels freezing on winter mornings.
Furthermore, customized wall surrounds come in scores of colors and trendy tile patterns. Believe it or not, you get the chic look of real marble without the painful upkeep. As a result, your space looks totally high-end without blowing through your savings.
On top of that, thick tempered glass doors finish off the whole design real slick. By doing this, natural light flows across the space and makes it look massive. Plus, special water-repellent coatings stop nasty soap scum from sticking to the glass panels.
Straight up, installing a built-in corner bench is a complete game changer for comfort. Furthermore, it gives you a safe spot to sit down while shaving your legs. Thus, you get fantastic support and zero risk of slipping on wet floors.
Moreover, sturdy metal grab bars do not have to look like boring hospital equipment anymore. In fact, modern safety bars match your sleek brushed nickel or matte black faucet finish. Because of this, you gain incredible stability while keeping your style super trendy.
Also, mounting a versatile handheld spray wand makes rinsing off super easy. Plus, washing down the enclosure walls becomes a total breeze after your shower. Honestly... you will wonder how you ever managed to live without one before.
Looking at the map, our service team routinely works right down inside Campbell County to help locals. Specifically in Hunter, Tennessee, where the 1,854 residents take serious pride in upgrading their homes. With a healthy local median household income, smart upgrades like this really boost your overall property value. Whether your house sits in ZIP code 37643 or right nearby, fast local service is always available.
Usually, project costs depend on how much water damage sits behind those old walls. However, getting a detailed site visit prevents any nasty financial surprises later on. In short, knowing all costs up front lets you plan your project budget with total confidence.
To help you compare your options, here is a breakdown of common materials used during a wet-area makeover:
| Material Type | Main Benefit | Maintenance Level |
|---|---|---|
| Acrylic Shells | Super tough and warm to touch | Extremely Low |
| Natural Stone Tile | Unmatched high-end luxury look | High (Requires Sealing) |
| Composite Panels | Zero grout lines and fast install | Very Low |
Clearly, filling up a giant basin burns through sixty gallons of hot water easily. On the flip side, taking a quick rinse uses way less energy overall. Consequently, your monthly utility bills drop down noticeable amounts right away.
Similarly, modern low-flow valve systems boost water pressure while saving precious gallons. Simply put, you get a powerful spray without burning a hole in your pocketbook. Therefore, you help save local environmental resources while enjoying a hot splash.
Besides that, preventing low-level water leaks protects your floor joists from rotting out. In reality, hidden leaks under old basins can cost thousands in hidden structural repairs. So, putting in fresh waterproof barriers keeps your subfloor dry and rock solid.
Just last month, my neighbor down the road decided to rip out her yellowed plastic tub. Frankly, she was terrified the work would drag on for three frustrating weeks. Amazingly, our hardworking crew finished her brand new glass enclosure in just two short days.
Now, she constantly boasts about how easy it is to step inside her wide enclosure. On top of that, she loves that no dirty water sloshes onto her floor mats anymore. Honestly, seeing her smiling face made me realize how much this upgrade improves daily life.
Indeed, many older folks living around here want to stay in their homes safely. Naturally, getting rid of elevated bathing edges lets them keep their independent lifestyle effortlessly. Hence, a smart safety overhaul offers massive psychological benefits for aging residents.
First off, people always ask if the whole renovation project takes forever to finish. Actually, most standard tear-outs and fresh installations take just one to three days total. Consequently, your home life experiences minimal disruption while the team builds your dream stall.
Secondly, folks worry if losing their main soaking basin lowers their house resale price. Surprisingly, modern buyers actually prefer huge walk-in tile spaces over dusty old soaking basins. Therefore, this targeted interior project actually makes your home way more appealing to buyers.
Thirdly, you might wonder if your current water heater can handle the new plumbing fixtures. Luckily, standard residential plumbing hookups fit right onto modern thermostatic mixing valves. What this means is your existing water supply line works completely fine without pricey utility upgrades.
Before our crew arrives, clear out all your shampoo bottles, towels and personal soap dishes. Additionally, remove any fragile hanging artwork from the bedroom wall directly behind the shower. After that, leave a clear path through your hallway so workers can bring in supplies easily.
Furthermore, keep your friendly pets locked in a cozy back room during active construction. In fact, dogs get pretty scared when loud power saws start cutting through thick tile. Thus, keeping them safe stops any accidental escapes out the open front door.
Lastly, double-check your fixture colors with your lead installer before work starts. Absolutely, verify that your matte black trim and clear glass doors match your initial order. Because of this careful prep, your final reveal will match your dreams 100 percent.
Right now, our friendly crew stands totally ready to measure your home space today. To get started, simply request your completely free quote with zero high-pressure sales tricks. Indeed, taking this simple step gets you one huge step closer to your dream bathroom setup.
Why waste another single day struggling to step over that high tub wall? Request your free estimate today so we can get your custom makeover project scheduled immediately!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Hunter repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Campbell County; the statewide picture lives on Tennessee; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote