Across Harney County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Now, have you ever tripped trying to climb into a giant porcelain basin? This messy bathroom upgrade lets you ditch that dangerous ridge completely. Which means you can wash yourself safely every single day without any fear.
Plus, upgrading this space makes your entire house feel way more modern. Therefore, you gain a brand new aesthetic that completely transforms your morning routine.
First off, contractors smash that old porcelain piece into tiny pieces using sledgehammers. This lets them haul the heavy chunks out through your narrow hallway without scratching your floors.
Meanwhile, they protect your bathroom vanity with heavy plastic sheets to catch stray dust. That guarantees your home stays remarkably clean while the messy demo work happens right in front of you.
Next, workers inspect the damp wooden boards hiding underneath your old soaking basin. This lets them spot hidden water damage before it turns into a total structural nightmare.
Besides that, they replace any mushy plywood with sturdy new lumber treated against moisture. Which means your fresh walking stall stands on a rock solid foundation for decades.
Afterwards, technicians drop a tough acrylic basin base right into the exposed alcove. This gives you a super low step that prevents tripping accidents when your eyes are full of soap.
Equally important, this custom pan slopes gently toward the drain so water never pools around your feet. That keeps your bathroom floor dry and prevents slippery puddles from forming on your tiles.
Moving along, crews slap heavy rubberized waterproof membranes all over the bare framing studs. This creates an impenetrable barrier that stops moisture from sneaking into your drywall.
Subsequently, they glue gorgeous ceramic tiles onto the walls using industrial strength thinset mortar. That gives your washing zone an incredible visual appeal that your guests will definitely admire.
Eventually, workers screw heavy tempered glass panels into the freshly tiled opening. This lets natural light flood your washing space instead of keeping you trapped in a dark cave.
On top of that, they install a shiny brushed nickel shower head with adjustable water pressure settings. Which means you get a soothing rainfall massage that melts away your daily stress effortlessly.
Finally, skilled craftsmen run smooth beads of silicone caulk along every single corner joint. This seals out moisture permanently so mold never grows in those tight little spaces.
To summarize, the entire transformation takes just a few days from start to finish. Therefore, you enjoy a fully functional washing station almost immediately without any long delays.
Living out in this vast Oregon expanse means you cherish your daily routines. Many rural properties feature older fixtures that desperately need a modern touch to match current lifestyle needs.
Because the local population sits at zero in some official remote tracking zones, finding reliable local contractors can feel tough. Thankfully, traveling tradespeople bring all the necessary tools straight to your driveway.
Although median household income figures fluctuate across remote parts of the Pacific Northwest, smart investments always pay off. Updating your bathing quarters drastically boosts your home resale appeal if you ever decide to sell.
Furthermore, local homeowners love saving money on future medical bills by eliminating high stepping hazards. That brings ultimate peace of mind to older residents who want to age in place gracefully.
Most standard swaps wrap up in roughly three to five working days from start to finish. This lets you get back to your normal routine without living in a constant construction zone.
Additionally, professional crews clean up their debris every single afternoon before leaving your property. Which means your living room and kitchen stay totally usable throughout the entire project.
Typically, the drain stays right where it was underneath the old soaking tub footprint. That clever trick saves you thousands of dollars in hidden pipe moving fees.
However, mixing valves sometimes get raised higher on the wall for easier reach while standing up. That guarantees a much better ergonomic experience every time you turn on the water.
| Feature | Old Deep Tub | New Walk In Stall |
|---|---|---|
| Step Height | High and Dangerous | Very Low Profile |
| Cleaning Effort | Hard to Scrub | Quick Wipe Down |
| Safety Level | Risky for Seniors | Extremely Secure |
Now that you know how much safer your daily routine can become, it is time to take action. Request your free estimate today and let local professionals transform your outdated bathroom into a gorgeous washing oasis.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote