Our Graham crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Alamance County within days.
Written quote at no cost, one callback, no chasing afterwards.
Transforming your tired old basin into a modern walk-in setup brings instant ease to your morning routine. Homeowners in Alamance County often find themselves tripping over high basin walls every single day, which gets super annoying fast.
Picture stepping into a spacious area without lifting your leg up to your hip. Old porcelain basins take up way too much room while offering very little actual usability. Upgrading to a low-barrier design gives you instant freedom, and honestly, it just looks a whole lot better in your home.
Most folks in zip code 27253 know that older houses around here were built with cramped wet rooms. Getting rid of that clumsy tub lets you use every square inch of your room. Plus, scrubbing hard water stains off an old porcelain rim is absolute torture on your lower back!
When you ditch that ancient tub, you instantly boost your daily efficiency. Modern materials stay clean with basic soap and water, saving you hours of intense scrubbing. Honestly, I once dropped a heavy wrench while working on my own place and spent three days trying to fix a giant chip... avoid that headache entirely by going with modern acrylic or composite walls.
Slipping on wet tile or smooth porcelain causes tons of avoidable household accidents every year. A low-threshold entry removes that dangerous obstacle completely. Furthermore, textured flooring in these modern setups keeps your feet planted firm even when things get soapy.
Living in a tight community with a population around 14,670 means looking out for family members as they age. Installing grab bars and built-in seating turns a risky chore into a relaxing experience. On top of that, your knees will definitely thank you every single morning!
Let's talk money without any confusing sales mumbo-jumbo or weird hidden surprises. Replacing a tub with a standing glass-enclosed space is an investment, but it doesn't have to drain your entire bank account. Local budgets vary, but getting a straight answer shouldn't feel like rocket science.
With a local median household income sitting around $35,152, every single dollar counts when you fix up your home. Smart homeowners look for durability without paying crazy luxury prices. Luckily, modern options fit almost any budget while still looking clean and crisp.
| Project Choice | Main Advantage | Time to Finish |
|---|---|---|
| Basic Acrylic Kit | Super affordable and easy to clean | 1 to 2 Days |
| Custom Composite Stone | Great durability and smooth finish | 2 to 3 Days |
| Full Custom Tile Layout | Unique look tailored to your taste | 4 to 6 Days |
Choosing basic acrylic helps keep overall expenses way down while still delivering a massive visual improvement. Custom tile work takes a little longer, but it gives you that fancy hotel feeling right in your own residence. No matter what path you take, asking for a detailed estimate ensures you never get hit with sudden price hikes mid-job.
Demolition day sometimes reveals ancient pipes that haven't seen light since the Nixon administration. Water leaks like to hide underneath old metal basins for years, quietly rotting out subfloors. Catching these hidden defects early protects your structure from crazy expensive structural damage later on.
Replacing rusted drain lines while the wall is completely open saves you thousands in future repairs. Actually, ignoring small plumbing issues early on is how a simple project turns into a total disaster... so fixing it right the first time is key. Experienced installers handle these surprises fast so your project stays totally on track.
First off, the work crew covers your hallways so dirt doesn't get dragged across your clean carpets. Then, we cut out the old iron or fiberglass basin using heavy power tools. It gets noisy for a couple of hours, but the messy phase wraps up surprisingly quick.
Next comes inspectin' the wooden framing to ensure everything is sturdy and completely dry. Any rotten studs get replaced immediately so your new wall panels sit straight and flush. After that, modified plumbing pipes get moved into position to align perfectly with the new floor drain center.
Finally, wall panels go up and heavy-duty waterproof silicone seals every single seam. Glass panels or frameless doors install last, turning the space into a sleek splash-free zone. Before you know it, the space looks wide open and super inviting!
Built-in wall niches give you dedicated spots for shampoos without cluttering your floor space. Recessed lighting overhead brightens up dark corners so you actually see what you are doing. Meanwhile, adjustable showerheads offer custom pressure that washes away daily stress in minutes.
Sliding glass doors keep warm steam inside while preventing water from puddle-making on your bathroom floor. Bench seating allows you to sit back and relax when you feel exhausted after a hard day of work. Small touches like matte black fixtures add a tons of character without costing an arm and a leg.
Working with nearby technicians who understand regional building codes keeps your home safe and fully compliant. Regional weather patterns bring humidity, meaning proper moisture barriers are essential inside your walls. Hiring someone who knows North Carolina homes guarantees your investment stands strong against mold and wood rot.
In addition, choosing a regional contractor means quick response times if you ever have questions later. Big nationwide chains treat you like a random ticket number, but local pros care about their reputation around town. You get honest work at fair prices from people who live right down the street.
Getting a qualified installer to inspect your layout clears up all the guesswork right away. They measure your physical footprint, check your current plumbing setup, and listen to what you want. Consequently, you get an accurate price without any annoying high-pressure sales tactics.
Looking at material samples in your actual home lighting helps you pick colors with zero regrets. You can feel the textured floors, check door options, and ask all the silly questions on your mind. Taking this quick step puts you in full control of your remodel from day one.
Ready to upgrade your morning routine with a fresh, safe, and open setup? Request your free estimate today and discover how easy transforming your wash space can be!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Graham repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Alamance County; the statewide picture lives on North Carolina; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote