Our Geneva crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Seminole County within days.
Written quote at no cost, one callback, no chasing afterwards.
Need a fresh look in your washroom fast? Trading that old soaking basin for a sleek walk-in spray stall brings total safety and modern style to your house today.
Honestly, nobody likes stepping over a huge tub wall early in the morning when your knees are still waking up. Besides that, high porcelain edges cause crazy slip falls every single day for folks in our area. Fortunately, taking out that clunky water trough creates an open floor space instantly. That means you get to enjoy a massive modern spray zone without moving any main walls in your house.
In addition to safety, clearing out that old basin gives your whole room a massive visually open feel. Also, dirty old fiberglass collects nasty mold in the deep corners that takes forever to scrub clean on weekends. Instead of wasting time on your knees with harsh chemical sprayers, you get smooth non-porous walls that shine with a simple wipe down. Honestly, it just makes your daily routine feel way less like a chore.
By the way, your home value usually gets a really sweet bump after doing this upgrade. Actually, most modern home buyers right now look specifically for upgraded master washrooms with big tiled walk-in sprayers rather than giant dust-collecting basins. Naturally, making this switch helps you enjoy your home more while building real equity for the long haul.
First off, our crew arrives to protect your floors and carefully measure every inch of your space. Then, we yank out the heavy cast iron or acrylic unit without damaging your surrounding drywall or flooring structures. After that, we inspect the subfloor underneath to fix any hidden water rot before setting down the tough new pan base.
Next, master workers update your rough-in pipes so the water flows right out without weird pressure drops. Above all, proper slope on the new floor pan keeps waste water moving straight down the main drain fast. Furthermore, we put up heavy-duty moisture barriers behind the walls so hidden leak damage never threatens your home structural wood again.
Finally, we install your choice of modern acrylic walls, solid surfaces, or custom tile work with absolute precision. Plus, we set your fresh chrome or brushed nickel fixtures, custom glass doors, and recessed corner caddies for soaps. Honestly, seeing that shiny new space come together in just a day or two feels totally awesome.
| Renovation Stage | Old Basin Setup | New Walk-In Setup | |
|---|---|---|---|
| Entry Barrier | High edge to step over | Low step or zero-threshold | |
| Maintenance | Hard scrubbing in tight corners | Quick wipe with mild soap | |
| Visual Space | Feels cramped and dark | Open look with glass panels | |
| Water Efficiency | Uses forty to fifty gallons | Saves water with high-flow heads |
When designing your new layout, picking the right accessories makes a huge difference for your daily peace of mind. For starters, built-in wall seating lets you kick back and relax under warm water after a long day at work. What is more, sturdy grab bars mounted directly to the wall studs give you total confidence while washin' your feet or soaping up.
Besides those safety picks, adding a secondary hand-held wand makes washing pets or cleaning down the wall panels totally effortless. In fact, thermostatic mixing valves keep your water temperture perfectly steady even when someone runs the kitchen sink down hall. Consequently, you never have to worry about sudden bursts of icy cold or burning hot water surprising you mid-lather.
To wrap it up, custom recessed wall niches keep all your shampoo bottles off the floor and off your bench space. Therefore, your wash area stays super organized, neat, and looking like a fancy hotel room every single day.
Living down in Seminole County, our muggy atmosphere creates crazy high humidity that gets trapped inside houses all year long. On top of that, homes in the 32732 ZIP code area often feature distinct older layouts that need accurate plumbing adjustments. Fortunately, local technicians understand how to handle local hard water mineral deposits that ruin cheap plastic valves over time.
For instance, with a local population around 2,940 residents, folks around here appreciate honest local work and straightforward estimates without high-pressure sales pitch games. Additionally, with a solid median household income across our rural community, homeowners want durable home upgrades that actually last for decades without falling apart.
Furthermore, getting proper permits through county offices keeps your property fully compliant with local building codes. Because our local crews handle all local paperwork for you, your project moves along smoothly without annoying municipal delays or legal headaches down the road.
Naturally, picking high-grade wall material decides how long your newly renovated space stays looking brand new. To illustrate, solid composite sheets give you a continuous waterproof shield with zero grout lines to ever scrub or repair later. Alternatively, custom porcelain tile offers endless layout patterns and classic beauty if you want a more custom luxury appearance.
On top of wall choices, heavy-duty shatterproof glass doors with spot-free protective coatings keep hard water spots from building up. Besides, heavy-gauge solid brass plumbing valves outlast cheap plastic interior parts every single time. So, choosing top materials upfront stops annoying leaks and keeps money in your bank account over time.
Whenever you decide to explore your options, getting a completely free estimate is totally simple and super stress-free. First, a friendly field professional comes straight to your doorstep to check out your existing layout and chat about your main goals. Afterward, we take precise laser measurements so your custom quote reflects exact prices without hidden surprise fees later.
Then, we walk you through a physical catalog of style options, wall colors, fixtures, and non-slip floor pan textures. Consequently, you get to customize every single detail of your project to match your personal style and family budget perfectly.
Finally, we hand you a detailed written estimate that lays out clear costs, job timelines, and full labor warranty coverage. Absolutely no pressure, no awkward sales tactics, and no obligation to buy anything on the spot... just honest answers to help you make the best choice.
While some folks worry about initial project costs, taking out an ancient tub actually saves you serious money on expensive future water damage repairs. Truly, hidden leaks behind decaying tile walls can slowly rot subfloors, ceiling joists, and drywall for years before you ever notice them. Replacing everything with modern sealed components stops structural destruction in its tracks completely.
Likewise, modern high-efficiency spray heads lower your monthly utility bill without sacrifice to water pressure performance. As a result, your brand-new setup practically starts paying for itself from day one through water energy savings.
Above all, the total ease of movement and peace of mind you gain every single morning is worth every single penny invested.
Now, taking the next step toward a safer and prettier home is easier than ever before. Simply reach out to your trustworthy local service crew to request your completely free price quote today. Soon, you will be enjoying a gorgeous, easy-to-clean walk-in spray area tailored just for you!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Geneva repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Seminole County; the statewide picture lives on Florida; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote