Bathtub To Shower Conversion

Bathtub To Shower Conversion in Garfield, Kansas (KS)

Our Garfield crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Pawnee County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
197
County
Pawnee County
State
Kansas
Region
Midwest
Median income
$42,000
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Time to swap that old deep tub for a modern walk-in option

Maybe you feel tired of stepping over a giant porcelain ledge every single morning just to wash your hair. Actually, many homeowners find themselves slipping and sliding in an outdated setup that no longer fits their daily routine. Fortunately, our local team specializes in removing those high-walled basins and replacing them with beautiful, low-profile bases that make your daily wash a breeze.

This smart swap instantly opens up your entire washroom, making a tight space feel incredibly airy and bright. By choosing this upgrade, you get rid of a major tripping hazard while adding a sleek, modern look to your home. We come right to your door to measure your setup and give you a clear, honest assessment of what it takes to upgrade your home.

Since we know every dollar counts, we focus on delivering top-notch craftsmanship that lasts for decades without breaking your budget. If you want to make your daily routine safer and much more enjoyable, we are ready to help you get started. You can easily request a free estimate today to see how simple this transformation can be.

Why local homeowners are making the switch

Think about how much space that old dusty basin wastes when you almost never use it for a deep soak. In fact, most busy people prefer a quick, refreshing wash over waiting twenty minutes for a deep tub to fill up. Transitioning to a spacious step-in base gives you more room to move around, which means you can finally say goodbye to elbowing wet plastic curtains.

On top of that, cleaning a flat, modern wall system is ten times easier than scrubbing old grout lines on your hands and knees. Because we use high-quality non-porous acrylics and solid stone composites, mold and mildew simply won't have a place to hide anymore. This means you will spend your weekends relaxing instead of inhaling harsh chemical fumes while scrubbing dirty corners.

Safety remains another huge reason why people choose to modernize their bathing areas. Transitioning to a low-threshold entry dramatically reduces the risk of slips, which gives your family members total independence. We install sturdy grab bars and built-in benches that blend perfectly with your new design, ensuring safety never compromises your style.

What to expect during your home transformation

You might worry that remodeling your washroom will turn your home into a dusty, chaotic construction zone for weeks. However, our experienced crew has perfected this specific process to minimize disruption, often completing the physical swap in just a couple of days. We carefully protect your flooring, remove the old bulky fixture, inspect the underlying plumbing, and install your new system with absolute precision.

To help you compare your options, here is a quick look at how the two setups stack up:

Feature Old Bulky Basin Modern Low-Step Entry
Entry Height High wall (usually 15-18 inches) Ultra-low threshold (often under 3 inches)
Cleaning Effort High (demands deep bending and scrubbing) Low (requires a simple wipe down)
Spacial Feel Cramped and cuts the room in half Open, airy, and visually spacious
Water Usage High volume required to fill up Efficient flow with modern heads

As soon as we pull out the old unit, we inspect the subfloor for any hidden water damage to ensure a solid foundation. This extra step prevents future mold issues, which guarantees your new setup remains structurally sound for a lifetime. After that, we run new plumbing lines and install beautiful, watertight wall panels that look exactly like premium tile.

Tailoring the design to fit your unique lifestyle

This upgrade lets you customize every single detail to match your personal taste and functional needs. For instance, you can choose from gorgeous slate textures, classic subway tile patterns, or smooth marble finishes. Which means you get the exact aesthetic you want without the high maintenance costs of real stone or traditional grout.

Beyond the walls, you can select premium fixtures like rain showerheads, sliding glass doors, or recessed storage cubbies for your soaps. This lets you organize your bottles neatly, keeping your new space clutter-free and looking like a premium spa. We help you choose the perfect combination of accessories to maximize your daily convenience and enjoyment.

Our local team brings tons of hands-on experience to every project we undertake in this quiet Pawnee County community. With a local population of around 197 residents, we treat every customer like our neighbor, because you actually are. We understand the unique home styles around the 67529 area, making us the perfect fit for your upcoming remodel.

A smart investment for your home and future

Improving your property value starts with upgrading the key areas that buyers look at first, especially the master washroom. Since most modern buyers prefer walk-in setups over outdated basins, this remodel makes your property highly attractive if you ever decide to sell. Even if you plan to stay forever, investing in your daily comfort makes perfect sense for your long-term peace of mind.

With a local median household income of about $42,000, we know how important it is to get real value for your hard-earned money. That is why we offer highly competitive pricing and durable materials that won't require costly repairs down the road. Our goal is to provide a premium finish that looks incredibly expensive without actually draining your savings account.

If you are ready to take the next step, we are standing by to make the process incredibly easy. We will visit your home, look over your current setup, listen to your ideas, and provide a detailed plan. Grab your phone or fill out our online form to request your free quote today and start enjoying a better morning routine!

Why the tub goes in Garfield

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Garfield

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Garfield

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Garfield

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Garfield

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Garfield repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Garfield

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Garfield in short

StandingIncorporated place
Population197
ZIP codes67529
Land area0.5 sq mi
Density366 per sq mi
Median income$42,000

For the bigger map: county seat pages start at Pawnee County; the statewide picture lives on Kansas; the wider region is the Midwest; background reading sits on Wikipedia.

Bathrooms we convert around Garfield

Conversions booked across Kansas

One three-day job stands between this bathroom and its best fixture.

Get my free quote