Our Fenton crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Genesee County within days.
Written quote at no cost, one callback, no chasing afterwards.
If you feel tired of stepping over that high, dangerous wall every single morning just to wash up, you are definitely not the only one. Many homeowners struggle with bulky, outdated basins that take up way too much space and rarely get filled with water. By swapping that old basin for a modern walk-in stall, you instantly create a safer and much more spacious washroom. We come right to your home in Genesee County to look at your setup and give you a free estimate on making this fantastic change.
Think about how much easier your daily routine will become when you do not have to balance on one foot anymore. This smart remodel gives your home a fresh look while making the space feel twice as big as before. Our friendly local team specializes in tearing out those old heavy iron or acrylic tubs and building beautiful, modern walk-in enclosures. You get a sleek setup that fits your lifestyle perfectly, and we handle all the hard work from start to finish.
Actually, many people worry about the mess and the cost of this kind of home improvement project. That is why we keep things super simple by offering straightforward pricing and clean, fast installations. Since we live and work right here in the local area, we treat your home with the same respect we show our own families. Let us help you transform that cramped, outdated corner into a beautiful oasis that you will love showing off to your guests.
First of all, safety is a massive deal for everyone, especially if you have little kids or older relatives visiting. Climbing over a slick, high barrier with wet feet is a recipe for a nasty slip. When you choose to install a low-profile entry pan instead, you drastically lower the risk of accidents in the washroom. This simple upgrade provides peace of mind because you can just walk right in without any awkward climbing.
Besides the safety factor, cleaning a large, deep basin is a total pain on your back and knees. Those old fiberglass units love to collect soap scum and mildew in hard-to-reach corners. On the flip side, our modern wall panels and glass enclosures are incredibly easy to wipe down with a squeegee. This means you spend way less time scrubbing on your weekends and more time relaxing in your clean home.
To give you a better idea of how these two options compare, we put together a handy little table below.
| Feature | Old Bulky Basin Setup | Modern Walk-In Stall |
|---|---|---|
| Step-In Height | High wall (usually 14 to 18 inches) | Ultra-low barrier (typically 1 to 3 inches) |
| Required Maintenance | Heavy scrubbing of deep corners and grout | Quick wipe down with non-porous surfaces |
| Visual Space | Cramps the room and blocks light | Opens up the floor plan and reflects light |
| Water Usage | High volume if you fill it up | Efficient drainage with steady flow |
Another major benefit is the sheer amount of floor space you reclaim during this process. Because a standard tub takes up a massive footprint, your bathroom can end up feeling like a tiny closet. Once we remove that giant barrier, the entire room suddenly feels open, airy, and full of light. You get to enjoy a touch of daily luxury without having to build a whole new addition on your house.
Now, let us talk about the cool stuff like design choices and materials that fit your budget. You can choose from gorgeous acrylic surrounds that mimic expensive stone or go with classic custom tile work. Acrylic is amazing because it resists mold, does not crack easily, and stays warm to the touch. Tile, on the other hand, lets you show off your personal style with endless patterns and colors.
On top of that, you can add awesome features like built-in benches, corner shelves, and sturdy grab bars. Having a nice seat to rest on while you wash makes the whole experience feel like a fancy hotel stay. We help you design the perfect layout so everything you need is right at your fingertips. Plus, we make sure the drain lines up perfectly with your existing plumbing so we do not have to tear up your subfloor.
Which means you get a custom-tailored space without paying the crazy prices of a full-scale home addition. We work with top-tier suppliers to bring you durable materials that will last for decades to come. During our visit, we will show you physical samples so you can touch them and see how they look in your actual light. This hands-on approach ensures you get exactly what you want without any stressful surprises.
You might be wondering how long your bathroom will be under construction and out of commission. Fortunately, our experienced crew has this process down to a science, often finishing the job in just a couple of days. First, we carefully protect your flooring and carpets with heavy drop cloths before we touch a single tool. Then, we demo the old cast iron or steel tub and haul it away so you do not have to deal with the junk.
After the demo, we inspect the wood framing underneath to ensure there is no hidden water damage or wood rot. If we find any soft spots, we repair them immediately so your new base has a rock-solid foundation. Next, our skilled installers run the new plumbing valves, set the pan, and secure the gorgeous wall panels. Finally, we seal every single seam with high-grade silicone to prevent any future leaks from happening.
This attention to detail is why local folks love working with us for their home upgrades. We do not cut corners or use cheap glues that will fail after a couple of years. Once we finish up, we sweep the area clean so you can start enjoying your new wash space right away. It is truly that simple when you hire a team that cares about doing the job right the first time.
Living in Fenton, Michigan, means dealing with cold winters where a quick, hot spray is much more appealing than waiting for a giant tub to fill. In this beautiful city of 11,336 residents, homeowners take great pride in keeping their properties in tip-top shape. Whether you live near the historic downtown area or closer to the scenic lakes, a modern washroom upgrade adds serious value. With a median household income of $53,638 in our community, making smart, budget-friendly updates is a great way to build equity.
If you ever decide to sell your home in the 48430 ZIP code, potential buyers will absolutely love seeing a sleek, modern walk-in stall. Most buyers today actually prefer a spacious, easily accessible wash area over a dusty old tub they will never use. This means you get to enjoy the comfort and ease of use right now, while also making your property much more attractive on the market later. It is a win-win situation for your daily life and your wallet.
Furthermore, we understand that local homes have different architectural styles, from cozy ranch houses to larger historic properties. Our team knows how to navigate the unique plumbing quirks found in older Michigan homes with ease. We arrive on time, respect your busy schedule, and always communicate clearly throughout the entire project. You never have to worry about hidden fees or surprise costs when you work with our honest local crew.
Are you ready to finally get rid of that old, ugly tub and upgrade your daily routine? The process is incredibly easy because we offer totally free, no-obligation consultations right in your home. We will measure your space, discuss your favorite styles, and give you an honest price quote on the spot. You can ask us all the questions you want, and we will help you find the perfect option for your budget.
Do not spend another day struggling with a cramped, unsafe bathroom that does not fit your needs. Contact us today to schedule your free visit and take the first step toward a beautiful, easy-to-use home. We cannot wait to meet you and help you transform your space into something truly special!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Fenton repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Genesee County; the statewide picture lives on Michigan; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote