Our Enola crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Cumberland County within days.
Written quote at no cost, one callback, no chasing afterwards.
Are you tired of tripping over that high tub wall every morning just to get a quick rinse? Swapping your old basin for a sleek, modern walk-in stall will instantly make your daily routine safer and way faster.
Actually, nobody really has time for a long soak anymore. Furthermore, stepping over a tall porcelain ledge with slippery wet feet is just an accident waiting to happen... You probably deal with this annoying hazard every single day.
Naturally, updating this specific area completely changes how your whole room looks and feels. Beyond that, getting rid of those high walls opens up tight spaces and makes everything look much bigger.
Therefore, replacing that outdated tub with an easy entry stall adds huge value to your house. In addition to that, modern waterproof wall systems prevent hidden mold growth behind your tiles.
Clearly, the biggest gain you get is pure everyday convenience. For instance, you can just walk right in without balancing on one foot like a confused flamingo.
Honestly, cleaning a modern glass and acrylic setup takes way less elbow grease. Coupled with smooth, non-porous wall panels, you will never have to scrub dirty tile grout lines with a toothbrush ever again.
Surprisingly, you also end up using way less hot water during your morning wash. As a result, your monthly utility bills will drop, which puts extra cash right back in your pocket.
| Old Setup Problems | New Stall Advantages | |
|---|---|---|
| High ledge to step over | Flat, easy zero-barrier entry | |
| Scrubbing hard grout lines | Mold-resistant acrylic walls | |
| Takes up huge floor space | Makes small rooms feel huge | |
| High water consumption | Fast and low-flow efficiency |
First, local installers will carefully remove your old metal or heavy iron basin. Subsequently, they inspect the subfloor underneath to fix any rotted wood from past hidden leaks.
Next, the crew adjusts your plumbing fixtures to line up with the new floor drain. Because of this step, you avoid huge water backup issues later on down the road.
Finally, heavy duty wall surrounds and custom glass doors get securely anchored into place. Thanks to modern techniques, this whole mess is usually finished in just one or two quick days.
To begin with, acrylic wall surrounds offer huge durability while looking super clean. Besides, these modern materials come in tons of neat patterns that look just like real expensive marble.
On top of that, slip-resistant floors give you huge peace of mind when surfaces get soapy. Consequently, you can move around freely without worrying about sudden slips or painful falls.
Eventually, adding built-in recessed caddies gives you neat spots for all your shampoo bottles. That means no more knocking over plastic bottles off narrow ledge corners!
Look, homes in Cumberland County often have distinct plumbing quirks from older building styles. In light of this, hiring local pros who understand regional home construction saves you tons of stress.
Now, whether you live in 17025 or nearby neighborhoods, local water hardiness can ruin cheap fixtures. For this reason, high quality anti-spotting glass coatings are a total game changer for local homeowners.
Also, considering the median household income of $48,009 around our area, picking a project that actually raises property resale value is just smart financial planning. Plus, for a town with around 6,574 people, local word-of-mouth reputation means our team always works extra hard to do top tier work.
Initially, you might think you are stuck with basic options, but custom upgrades are endless. Plus, built-in fold-down seats offer unmatched relaxation when you just want to stand under warm running water.
Additionally, corner footrests make shaving your legs a total breeze instead of an awkward balancing stunt. With this in mind, every single little feature gets placed exactly where you want it.
Furthermore, stylish grab bars can be integrated to match your brushed nickel or matte black hardware. So, you get ultimate safety without making your washroom look like a bland hospital room!
To start, taking care of your modern space is stupidly simple compared to old cast iron units. Standard non-abrasive sprays and a soft squeegee will keep glass walls crystal clear.
Afterwards, wiping down the base once a week keeps mineral spots from building up near the drain. Because of these slick stain-resistant materials, your home retains its shiny, spa-like charm for decades.
Indeed, avoiding harsh bleach products preserves the glossy protective coat on your fresh walls. As a rule, a fast daily rinse with simple warm water keeps everything spotless.
Obviously, smaller footprints need clever spatial planning to avoid feeling claustrophobic. By using clear sliding glass panels, light bounces around freely to instantly brighten up dim corners.
Meanwhile, moving the main valve controls closer to the entrance means you never get blasted with ice cold spray while turning on the water. How cool is that simple fix?
Therefore, thoughtful designs like this transform a simple functional room into your absolute favorite cozy nook in the whole house. You deserve a smooth morning start without annoying physical hurdles in your way.
Granted, any big home update costs money upfront, but this trade yields huge long-term financial returns. Consequently, real estate buyers constantly search for upgraded washrooms with step-in stalls rather than old dated tubs.
Furthermore, avoiding future water damage repairs saves you thousands of dollars down the line. Old hidden leaks under deep basins slowly rot structural floor joists over time.
Instead, investing in a sealed, modern unit protects your structure while boosting daily living ease. In short, it is one of the smartest upgrades you can ever make to your home.
Right now, attempting a DIY swap usually leads to disastrous hidden water leaks and ruined drywall. Instead, working with a trained crew ensures your floor pan is perfectly leveled and 100% watertight.
Likewise, taking advantage of a free estimate helps you plan out costs without any pressure or hidden surprises. You get exact measurements and visual design ideas tailored specifically to your exact layout.
So, why keep struggling with that awkward, outdated tub wall every single morning? Reach out today to get your free estimate and kickstart your dream washroom makeover without any headache!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Enola repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Cumberland County; the statewide picture lives on Pennsylvania; the wider region is the Northeast; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote