Bathtub To Shower Conversion

Bathtub To Shower Conversion in Elmwood Park, Philadelphia, Pennsylvania (PA)

One alcove in Elmwood Park is about to earn its keep again. The Philadelphia crew handles demo, plumbing, walls and glass.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Get Your Dream Bathroom Fast with a Modern Upgrade

You can finally say goodbye to that outdated, high-walled basin that makes your daily routine feel like a risky hurdle course.
By replacing that bulky old tub with a sleek, walk-in design, you instantly open up your room and make your morning routine much safer.
Our local team specializes in swapping out those old cast iron eyesores for beautiful, spacious walk-in stalls that fit your space perfectly.

If you live in this cozy pocket of Philadelphia County, you already know how tight these classic home layouts can feel.
Which is why removing a massive unused tub and installing an easy-access base instead gives you way more room to move.
This smart upgrade adds massive value to your home while giving you a fresh, modern space to wash away your daily stress.

To make things even better, we offer a completely free in-home consultation to measure your layout and show you what is possible.
You get to see gorgeous design options right in your own home without spending a single dime upfront.
Grab your free estimate today and let us help you plan the ultimate bathroom makeover!

Why Swapping Your Tub for a Walk-In is a Game Changer

Think about how much space that old, dusty basin actually wastes every single day when you only use it to stand and rinse off anyway.
Replacing that clumsy setup with a modern, low-threshold pan gives you a huge amount of extra elbow room.
This simple change transforms a cramped, dark corner into a bright oasis that feels like a high-end spa.

Safety plays a massive role in why local homeowners make this smart switch.
Stepping over a high porcelain wall on a wet, slippery floor leads to countless home accidents every year.
Our sleek, low-profile bases allow you to walk right in without any awkward climbing or balancing acts.

Feature Your Concrete Benefit
Low-Threshold Entry Super safe access that prevents slips and trips.
Acrylic Wall Surrounds No more scrubbing moldy tile grout lines.
Built-In Seating Options Relax in total safety while you wash up.

On top of the safety benefits, cleaning becomes a total breeze with our state-of-the-art non-porous acrylic surrounds.
Because we install solid, seamless panels, you will never have to spend your weekends scrubbing moldy grout lines with an old toothbrush again.
This means you get to spend your free time relaxing instead of cleaning harsh chemicals off your bathroom walls.

The Custom Design Options You Will Love

Your new setup does not have to look like a boring, sterile hospital room.
Actually, we offer gorgeous simulated stone patterns and beautiful tile textures that look incredibly luxurious.
You get to customize the exact color, pattern, and fixtures to match your personal style perfectly.

Besides the beautiful walls, you can choose from a variety of amazing accessories like built-in corner caddies and sturdy grab bars.
We even install comfortable built-in shower benches that make shaving your legs or relaxing under the warm water incredibly easy.
This level of customization ensures your new space fits your physical needs as well as your design tastes.

Furthermore, we offer premium glass doors that glide open effortlessly to keep the water exactly where it belongs.
If you prefer a more open feel, we can design a barrier-free wet room style that looks ultra-modern.
No matter what you choose, our durable materials resist chipping, cracking, and fading over the years.

What to Expect During Your Fast Installation

You might worry that a major home renovation like this will leave you without a bathroom for weeks on end.
Fortunately, our experienced crew works incredibly fast and often finishes the entire physical swap in just one or two days.
This rapid turnaround time minimizes the disruption to your household so you can get back to your normal routine quickly.

Our process starts with carefully removing your old fixture without damaging your surrounding drywall or plumbing.
Next, we inspect the subfloor underneath to ensure there is no hidden water damage or rot that needs addressing.
This thorough inspection gives you total peace of mind knowing your home is structurally sound and protected against future leaks.

Once the foundation is solid, we install the new heavy-duty base and hook up the fresh plumbing fixtures.
Then, we seal the beautiful new wall panels securely to create a completely watertight barrier.
You are left with a sparkling clean, fully functional space that is ready to use almost immediately.

Understanding the Real Costs and Long-Term Value

Let us be completely honest about the financial side of doing a bathroom remodel in this part of Pennsylvania.
While a full-scale room gut can cost a small fortune, focusing solely on this specific wet-area upgrade is highly cost-effective.
You save thousands of dollars by keeping your existing plumbing lines in their original locations.

This targeted upgrade is one of the smartest investments you can make for your property value.
Potential home buyers love seeing modern, accessible walk-in features rather than old, stained soaking tubs from decades ago.
Which means you will likely recoup a massive portion of your project cost if you ever decide to sell your home.

However, the real value lies in the daily peace of mind and physical ease you experience right now.
Investing in your safety and personal convenience pays massive dividends every single morning.
Our team works hard to find a solution that fits your budget perfectly while still delivering top-tier craftsmanship.

Why Our Local Team is the Right Choice for Your Project

We take immense pride in serving our neighbors throughout the 19142 and 19153 ZIP codes with honest, high-quality workmanship.
As a local business, we understand the unique plumbing quirks of the historic homes in this beautiful community.
This specialized knowledge allows us to anticipate structural challenges before they turn into costly surprises for you.

We treat your home with the absolute highest level of respect from the moment we walk through your front door.
Our crew uses protective drop cloths and cleans up every speck of dust before we pack up our tools.
You will never have to worry about cleaning up a messy construction zone after we leave your property.

Now is the perfect time to take the first step toward a beautiful, safer bathroom space.
Simply reach out to us today, and we will set up a convenient time to visit your home and provide a comprehensive, free estimate.
Let us show you how simple and affordable transforming your bathroom can really be!

Why the tub goes in Elmwood Park

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Elmwood Park

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Elmwood Park

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Elmwood Park

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Elmwood Park

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Elmwood Park repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Elmwood Park

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Tubs coming out all over Philadelphia

Demo day within reach of Elmwood Park

One three-day job stands between this bathroom and its best fixture.

Get my free quote