Bathtub To Shower Conversion

Bathtub To Shower Conversion in Ellis, Kansas (KS)

Our Ellis crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Ellis County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
2,158
County
Ellis County
State
Kansas
Region
Midwest
Median income
$47,333
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Ditching the Old Basin for a Modern Walk-In Setup

Are you tired of tripping over that tall porcelain tub wall every single morning just to get clean? Upgrading your bath space into a sleek walk-in area instantly boosts your daily safety while giving your home a fresh look. By contacting us today, you can secure a free estimate from experienced local builders who actually know how to get the job done right.

Luckily, swapping out a giant dust-collecting basin for a wide open entry completely alters your morning routine. Honestly, nobody really has time to soak in a deep tub after a crazy long work week anyway... You just want to jump under a warm stream of water and get moving!

Furthermore, your old basin takes up a huge chunk of real estate in an already tight washroom. Plus, that slippery sloped floor inside those vintage tubs is basically a disaster waiting to happen for your knees and ankles.

In fact, modernizing this space creates a seamless transition that makes your whole washroom feel massive. Naturally, removing that bulky basin walls gives you tons of extra elbow room to scrub without banging your joints.

Why Homeowners in Western Kansas Are Making the Switch

Interestingly enough, living in a charming historic city in Ellis County with around 2,158 people means dealing with plenty of older homes built decades ago. Many properties across the 67637 ZIP code area still feature original, narrow washroom layouts from back in the day.

Consequently, modernizing these dated setups helps folks upgrade their daily living standards without breaking the bank. On top of that, with a local median household income of $47,333, smart property owners want cost-effective upgrades that actually build long-term real estate equity.

To be fair, older plumbing fixtures in this part of the Sunflower State often suffer from hidden water damage underneath the heavy metal. Therefore, tearing out that old tub lets us inspect your subfloors and swap out aged pipes before catastrophic leaks happen.

Besides, nobody likes scrubbing nasty mold out of deep porcelain corners every Saturday morning. Switching to smooth, non-porous wall panels completely eliminates those nightmare cleaning sessions.

Comparing Traditional Basins with Modern Walk-In Setups

To help you see the huge difference, we put together a simple breakdown of how these two options stack up for your everyday life.

Features Old School Deep Tub Modern Walk-In Fixture
Accessibility High step-over height required Low barrier or zero-threshold entry
Maintenance Hard grout lines and deep corners Smooth acrylic or stone panels
Water Usage Requires 30 to 50 gallons to fill Saves water with efficient heads
Safety Level Slippery sloped floor surface Textured anti-slip base floor

Clearly, making the upgrade gives you a massive advantage when it comes to long-term practical living. Furthermore, the overall visual upgrade instantly elevates your home inside the sunflower state without needing a total teardown.

Step by Step Process for Your Washroom Transformation

Initially, our team visits your property to measure your exact footprint down to the fraction of an inch. After that, we go over all the cool wall styles, fixtures, and door styles you want.

Afterwards, we carefully tear out your old cast iron or fiberglass vessel without ruining your surrounding sheetrock. Next up, we inspect the subfloor, repair any hidden rot, and update your drain plumbing to handle heavy water flow.

Thereafter, we install a custom-fit, heavy-duty composite pan right on the subfloor to prevent any future water leaks. Additionally, we mount waterproof backing boards along with heavy-duty wall surround systems that totally lock out moisture.

Finally, we hook up your fresh hardware, add sturdy grab bars, mount your glass doors, and clean up every trace of dust. In short, you get a beautiful, functional spray station that is ready to use in almost no time!

Customizing Your New Walk-In Setup

Naturally, everybody has their own unique style when it comes to interior design choices. For instance, you can pick between sleek sliding glass doors or open curtain layouts depending on your room space.

Meanwhile, multi-function handheld wands, overhead rain showerheads, and recessed wall caddies keep all your soaps super organized. Plus, adding a built-in corner seat gives you a comfy spot to relax while shaving your legs or washing your feet.

The Direct Benefits of Removing Your Vintage Tub

Specifically, safety stands out as the absolute biggest reason folks contact us for this specific remodel. Lowering the entry ledge from a steep sixteen inches down to a couple of simple inches dramatically cuts down trip risks.

Besides, upgrading your washroom hardware gives your property a high-end atmosphere that potential home buyers absolutely love. So, you get to enjoy absolute luxury every single morning while building real value in your property.

Surprisingly, high-grade acrylic wall surrounds resist mildew, water spots, and tough mineral buildup effortlessly. Therefore, you spend far less time scrubbing on your hands and knees with harsh harsh chemicals.

As a matter of fact, your morning routine speeds up significantly when you can step directly into your wash station. Thus, you save precious minutes every single morning when you are rushing to get ready for work.

Addressing Common Concerns About Removal Projects

Perhaps you are worrying that taking out your only soaking basin will hurt your property's overall resale value down the line. However, most modern buyers today heavily favor a massive, easy-access wash station over a dusty tub they never fill up.

Alternatively, you might worry that the installation process will tear up your home for weeks on end. On the contrary, our fast removal and installation methods usually get the entire project wrapped up super quick without crazy delays.

Granted, budget concerns always pop up when thinking about replacing big indoor plumbing fixtures. That being said, we offer totally clear pricing upfront so you never face weird hidden fees halfway through the build.

Furthermore, water leaks around old rim walls can slowly rot out your floor joists over several years. By installing a fully sealed, modern acrylic base, you actively shield your floor structures from expensive water rot down the road.

Why You Should Get a Free Estimate Today

Right now, taking the first step toward your ideal washroom makeover is completely stress-free and simple. By requesting a totally free quote today, our local specialists will stop by, take precise measurements, and show you exact project costs.

Honestly, waiting until your current basin leaks or becomes a physical hazard just creates bigger headaches later on. Taking action today keeps your house safe, upgrades your living quality, and saves you money on future water damage repairs.

Similarly, our crew respects your living area, wears protective boots, and cleans up every single piece of demo trash. So, you do not have to stress about a giant messy site cluttering up your hallway during the project.

Ready to throw away that clunky old basin and enjoy a gorgeous, accessible splash zone in your home? Contact us right now to book your free estimate and kickstart your dream washroom project with local folks you can trust!

Why the tub goes in Ellis

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Ellis

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Ellis

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Ellis

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Ellis

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Ellis repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Ellis

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Ellis in short

StandingIncorporated place
Population2,158
ZIP codes67637
Land area1.7 sq mi
Density1,302 per sq mi
Median income$47,333

For the bigger map: county seat pages start at Ellis County; the statewide picture lives on Kansas; the wider region is the Midwest; background reading sits on Wikipedia.

Bathrooms we convert around Ellis

Conversions booked across Kansas

One three-day job stands between this bathroom and its best fixture.

Get my free quote