Our Electra crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Wichita County within days.
Written quote at no cost, one callback, no chasing afterwards.
Getting stuck in a daily routine that feels outdated can really ruin your morning mood. Maybe you are tired of climbing over that high porcelain barrier just to rinse off before work. Fortunately, a smart layout swap can instantly breathe new life into your daily routine by making your space much safer and more open.
This simple change makes your daily routine much faster. By swapping that old, dusty basin for a sleek, low-profile basin pan, you stop stubbing your toes every single morning. This means you get to enjoy a quick, refreshing wash without the hassle of stepping into a deep pool of water.
Our professional crew visits your home to measure everything and give you a detailed free estimate. We take care of all the heavy lifting so you do not have to sweat the details. Making this upgrade is honestly one of the easiest ways to boost your home value while saving your sanity.
Let us be real for a second because nobody actually has time for long, soaking baths anymore. Most of us just want to jump in, get clean, and get on with our busy days. Which is why trading that bulky unused basin for a spacious, modern stall is a total game-changer for your daily workflow.
This smart modification saves a massive amount of floor space. Older homes often have cramped layouts, but removing that wide cast-iron obstacle creates a much more open atmosphere. On top of that, you will finally say goodbye to scrubbing those hard-to-reach corners where mold loves to hide.
Safety is another huge factor that you should keep in mind. Slipping on wet porcelain is incredibly scary, especially if you plan on staying in your home as you get older. By opting for a low-threshold entry, you drastically reduce the risk of nasty falls and make your home much safer for everyone.
To help you weigh your options, we put together a quick comparison table below:
| Feature | Old High-Wall Tub | New Walk-In Stall |
|---|---|---|
| Entry Height | Usually 14 to 18 inches high | Low-threshold (under 3 inches) |
| Cleaning Effort | Deep bending and heavy scrubbing | Easy wipe-down surfaces |
| Floor Space | Bulky and crowd-pleasing | Sleek, open, and roomy |
Now, you might be wondering how we actually pull off this transformation without ruining your week. First, our team comes out to inspect your current plumbing lines to ensure everything is solid. This lets you avoid nasty surprises like hidden water damage or mold behind the old tile work.
After that, we carefully extract the old heavy basin without damaging your surrounding walls. We then install a modern, slip-resistant base that hooks up perfectly to your existing drain system. This means we do not have to tear up your entire floor just to move your pipes around.
Finally, we install gorgeous, waterproof wall surrounds that match your personal style. You can choose from a variety of finishes that look like expensive stone but require almost zero maintenance. Once the seals dry, you are ready to enjoy a refreshing wash in your beautiful new space.
Selecting durable materials is crucial because you want this investment to last for decades. High-quality acrylic surrounds resist chipping and scratching much better than cheap plastic alternatives. This ensures your walls stay bright and clean without requiring harsh chemical scrubbers.
We also offer heavy-duty tempered glass doors that slide smoothly on rust-proof tracks. These sleek doors keep water exactly where it belongs while letting natural light fill your room. Which means you can say goodbye to gross, moldy plastic curtains forever.
Adding grab bars does not mean your bathroom has to look like a cold hospital room. Modern safety bars come in beautiful metallic finishes like brushed bronze and matte black to complement your fixtures. These sturdy accessories give you extra stability when soapy water makes things slippery.
We can also install a comfortable built-in bench or a fold-away seat for ultimate relaxation. This lets you sit down and relax while the warm water washes away your daily stress. It is all about customizing the space to fit your exact physical needs and lifestyle.
Living in a tight-knit Texas community means you deserve personalized service from people who actually know the area. Our team loves driving out to help homeowners update their spaces in Electra, TX, where the classic homes often feature older, outdated plumbing layouts. With a local population of around 2,721 residents, we treat every single client like our close neighbor.
We understand the unique challenges of regional homes, especially those built during different construction booms. Since the median household income here is about $31,875, we make sure to offer cost-effective options that do not break the bank. We proudly serve the entire 76360 ZIP code area with prompt, friendly, and reliable service.
Working with a local contractor means you get fast response times and clear, honest communication. We do not use pushy sales tactics or hidden fees because our local reputation means everything to us. You can count on us to deliver high-quality craftsmanship that stands the test of time.
Taking the first step toward a more functional home is much easier than you think. All you have to do is reach out to us to schedule a quick visit from our friendly local technicians. This lets us look at your space, discuss your design ideas, and provide a detailed, no-obligation quote.
We pride ourselves on offering upfront pricing so you can make an informed decision for your family. There is absolutely no pressure to buy, just honest advice from people who care about your home. We want to help you design a space that brings you daily joy and peace of mind.
Do not spend another day struggling with an old, awkward setup that does not serve your needs. Contact us right now to claim your free on-site consultation and estimate. Let us transform your bathroom into a beautiful, accessible oasis that you will absolutely love using every day!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Electra repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Wichita County; the statewide picture lives on Texas; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote