Our Dayton crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Franklin County within days.
Written quote at no cost, one callback, no chasing afterwards.
Does your clunky old basin feel like it takes up way too much space in your home? You can reclaim that valuable floor area by swapping your bulky tub for a sleek walk-in bathing space that makes getting ready a breeze.
Upgrading your bathroom setup in this quiet corner of Franklin County might sound like a huge headache, but it really boils down to making your daily routine way more functional. You live in a place where people value practicality and straightforward living, so why keep a tub you never even use?
Think about how much time you spend stepping over that high edge every single morning. By removing that obstacle, you gain instant access to a safer and much more accessible bathing environment that fits your lifestyle perfectly.
This change means you stop worrying about tripping on slick porcelain while you try to start your day. Plus, you get to pick out beautiful tiles and hardware that actually match your style instead of being stuck with that beige relic from thirty years ago.
Considering that the median household income in this area sits around sixty thousand dollars, you likely want to make sure every cent you put into your house counts. Modernizing your plumbing fixtures is one of the best ways to ensure your property remains desirable for any potential future buyers.
Beyond just the money side, think about the sheer ease of cleaning a streamlined glass enclosure. You no longer have to scrub those awkward corners where mildew loves to hide behind a curtain rod that always seems to fall down.
Maybe you worry that your bathroom is too small to fit a proper stall. Actually, these custom setups are designed to squeeze into the exact footprint where your old tub currently sits, which saves you from needing a total floor plan overhaul.
Since you reside within the 83232 zip code area, you know how important it is to find local help that understands the specific challenges of our regional homes. You deserve someone who can walk through your door, look at the plumbing, and tell you exactly how to make it work.
Choosing the right wall panels or tile is crucial because you want something that stands the test of time without constant upkeep. Many folks choose non-porous surfaces that resist staining and stay looking sharp for years, providing you with a high sense of ease during your morning routine.
Also, consider the type of hardware you install, as brushed nickel or oil-rubbed bronze can elevate the entire look of your room. You want materials that feel sturdy under your touch and don't show every single water spot after you finish your shower.
| Benefit | Feature |
| Lower maintenance | Non-porous acrylic walls |
| Better safety | Low-threshold entry pans |
| Visual appeal | Custom glass enclosures |
| More storage | Built-in wall niches |
Usually, the process starts with a careful assessment of the existing plumbing lines beneath your current unit. Once we clear out the old porcelain, we make sure the floor is properly reinforced and waterproofed to prevent any future leaks from damaging your subfloor.
Subsequently, we install the new base, which often features a low-profile entry point. This specific design choice provides you with a much higher level of safety compared to climbing over a tall, slippery wall every time you want to rinse off.
Selecting a team that respects your home is just as important as the materials you pick for the walls. You want folks who show up on time, clean up their mess, and treat your bathroom like it was their own personal sanctuary.
Since you live in a town of five hundred seventy-seven people, you probably prefer working with neighbors who actually care about their reputation. Getting a fair estimate for your project should never be a high-pressure sales tactic, but rather a transparent conversation about what you need.
Whenever you remove a deep tub, you suddenly find an extra few feet of wall space that was previously wasted. You can turn this area into a spa-like retreat by adding a rainfall head or perhaps a built-in bench for sitting down while you scrub.
Moreover, glass doors can make even the smallest room feel twice as large by letting light bounce around the corners. This creates a bright and airy atmosphere that turns your boring morning chore into a much more pleasant experience for your mind and body.
Don't settle for cheap plastic inserts that start to yellow after only a couple of seasons of use. Investing in quality materials might cost a little more upfront, but it pays off when you don't have to replace the whole unit in five years.
Furthermore, always make sure the ventilation in your bathroom is up to par before you finish the job. A good fan keeps moisture levels down and protects your new surfaces from potential mold growth, which keeps your living environment healthy.
Now is the perfect time to stop staring at that dusty tub and start imagining a walk-in space that actually serves your needs. You can reach out today to get a free estimate for your project, which gives you a clear picture of the costs and the timeline.
Finally, you deserve to have a bathroom that functions exactly how you want it to every single day. By reaching out for a professional assessment, you put the power back in your hands to start the transformation whenever you feel ready to pull the trigger.
Working with someone familiar with the geography and climate of Dayton means your project won't hit weird snags due to old pipes or specific local building codes. You get the benefit of experience without having to explain your house to someone who has never been to your part of the state.
Whatever your vision for your remodel, we can help you turn it into a reality. You just need to ask for that free quote to see how affordable and simple it can be to move away from the traditional tub and into a modern, open design.
Think about how nice it will feel to finally have a bathroom that feels like a customized space rather than a hand-me-down from the previous owners. You gain so much physical space, but you also gain a sense of order in your home that makes life just a little bit smoother.
Whether you plan to stay in your current house for twenty years or you want to spruce it up for a future sale, this kind of upgrade makes sense. It is a practical move that pays dividends in both your daily mood and your property value.
If you have been waiting for a sign to finally start this project, this is it. You have nothing to lose by asking for a free price breakdown, and you might be surprised by how quickly we can get everything done for you.
You deserve a home that feels like it belongs in the current century. Stop letting that old fixture dictate the layout of your room and start enjoying the benefits of a modern and open design right now.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Dayton repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Franklin County; the statewide picture lives on Idaho; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote