Anywhere in Colorado: the tub comes out, the shower goes into the same alcove, and the price was on paper first.
Written quote at no cost, one callback, no chasing afterwards.
Are you tired of stepping over a giant porcelain wall just to wash your hair in the morning? Fortunately, swapping that outdated basin for a sleek glass enclosure gives you instant relief and modern styling.
Consequently, many homeowners across the Centennial State decide to rip out their bulky tubs for something way safer and easier to use. This smart home project completely revitalizes your daily routine while adding serious value to your property.
By ditching that old rusty fixture, you open up valuable floor space in your bathroom. Furthermore, local folks dealing with cramped washing areas will notice an immediate difference in room layout.
Maybe you never take baths and only use the shower anyway. Instead of wasting precious square footage, a streamlined glass basin setup lets you stretch your arms without hitting walls.
Besides that, cleaning a sleek tile stall takes half the time of scrubbing a deep porcelain tub. Meanwhile, busy parents and aging residents appreciate the low-threshold entry that prevents dangerous slips and nasty falls.
Across the Rocky Mountain region, houses feature diverse architectural designs from historic Victorians to modern mountain retreats. Naturally, updating your bathroom requires matching the regional aesthetic while keeping things practical.
Specifically, many properties in the ZIP codes spanning this high-altitude state were built decades ago with massive garden tubs. Transforming these outdated bathroom layouts lets you modernize your living space without moving to a new home.
Plunging into a home improvement project can feel a bit overwhelming if you do not know what happens behind the scenes. Nevertheless, breaking down the steps helps you prepare your household for the upcoming construction work.
First, trusted local contractors arrive at your house to inspect the plumbing lines and measure the exact dimensions of your existing washing zone. Then, they provide a detailed plan tailored specifically to your architectural needs.
Once you approve the design, skilled workers carefully remove the heavy cast iron or fiberglass shell without damaging your surrounding drywall. Afterwards, they adjust the drain locations and water pipes to fit your brand-new enclosure.
Simultaneously, waterproofing membranes go up to protect your framing from moisture damage over the coming decades. This meticulous attention to detail ensures your investment stays solid and leak-free.
Next comes the fun part where you pick out your tile patterns, glass doors, and rainfall showerheads. Specifically, choosing brushed nickel or matte black hardware instantly elevates the visual appeal of your newly renovated room.
Ultimately, these stylish upgrades create a spa-like atmosphere right inside your own house. You will love waking up early just to enjoy the refreshing water pressure in your custom stall.
Choosing between keeping an old tub or installing a sleek washing enclosure is a major decision for any homeowner. To help you visualize the differences, check out this quick comparison table.
| Feature | Old Bathtub Setup | New Glass Enclosure |
|---|---|---|
| Accessibility | High step-over wall | Low threshold entry |
| Cleaning Time | Hard to scrub corners | Quick wipe down |
| Floor Space | Takes up entire room | Opens up layout |
| Safety Risk | Higher slip hazard | Grab bars and non-slip |
Clearly, upgrading your washing space delivers massive practical benefits for everyday living. Besides that, you eliminate the constant headache of scrubbing stubborn soap scum off deep curved walls.
Investing in your residence is always a smart financial move when you pick the right projects. Specifically, bathroom updates yield a high return on investment when you decide to sell your house later on.
Because potential buyers love turnkey bathrooms, a modern washing stall makes your listing stand out instantly. Moreover, energy-efficient fixtures and modern waterproof seals save you money on costly repairs down the road.
Pricing out a home renovation depends on materials, plumbing complexity, and the size of your current washing area. Yet, working with transparent local pros ensures you never encounter hidden fees or surprise charges.
Instead of guessing costs, you can easily request a transparent estimate from dedicated tradespeople who service your neighborhood. This lets you plan your finances accurately without any unnecessary stress.
Tackling plumbing and demolition by yourself often leads to expensive mistakes and ruined drywall. Instead of risking a DIY disaster, hiring experienced local technicians guarantees the job gets done right the first time.
These regional experts understand local building codes and weather conditions across the Centennial State better than anyone else. Consequently, your renovation meets all safety standards and structural requirements effortlessly.
Professional contractors respect your home by laying down protective floor coverings and cleaning up debris every single day. Furthermore, they work efficiently to minimize disruption to your normal daily routine.
Before you know it, the plastic sheeting comes down and you get to experience your gorgeous new washing stall. You will wonder why you did not upgrade your bathroom years ago.
Stop putting up with a cramped, outdated bathroom that does not fit your lifestyle anymore. Instead, take control of your home environment by scheduling a consultation with friendly local specialists.
Getting started is completely risk-free and gives you all the information you need to make the right choice. Reach out right now to request your free estimate and begin your home transformation journey.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote