Across Clay County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of climbing over that high porcelain barrier every single morning just to wash up. If so, you are definitely not alone because many homeowners right here in our beautiful Red River Valley region face this daily struggle. This is why we help you swap that outdated, hazardous basin for a sleek and modern walk-in stall.
Naturally, making this change boosts your home safety instantly. Which means you can stop worrying about slippery trips and falls. On top of that, you get a fresh, open look that makes your whole washroom feel twice as big.
Actually, we specialize in coming right to your house to measure everything and give you a free estimate. This lets you plan your budget without any hidden surprises or stressful sales pressure. You will love how fast our team can transform your space from a clunky, dated mess into a clean oasis.
Honestly, let us look at the facts about how we live today. Most of us simply do not have the patience to sit and wait for a giant basin to fill up with warm water anymore. Instead, you probably prefer a quick, refreshing spray that gets you ready for the day ahead.
Consequently, replacing that old deep tub creates a much more functional layout. This decision saves you water and precious time during those hectic weekday mornings. Believe it or not, a modern low-profile stall actually increases your property value because modern home buyers actively look for these convenient setups.
To help you compare the two options, we built a handy little table below:
| Feature | Old Deep Basin | New Walk-In Setup |
|---|---|---|
| Step-In Height | High (14 to 18 inches) | Very Low (3 to 5 inches) |
| Water Usage | High (takes gallons to fill) | Low (efficient flow) |
| Floor Space Feel | Cramped and bulky | Open and airy |
Clearly, the benefits of making the switch go far beyond just looking nice. Since we use top-grade materials, your new setup will resist mold and grime like a champ. This means you will spend way less time scrubbing on your hands and knees with harsh chemicals.
Perhaps you worry about your home turning into a messy construction zone for weeks. Fortunately, our local crew has perfected this specific remodeling trade so we get the job done incredibly fast. We start by carefully removing your old heavy cast iron or acrylic basin without damaging your existing walls.
After that, we inspect the underlying wood and pipes to ensure everything is dry and structurally sound. This step prevents future leaks that could ruin your ceiling downstairs. Then, we install a heavy-duty acrylic shower pan along with beautiful, water-resistant wall surrounds that fit your style.
Finally, we seal every single joint with premium silicone to guarantee a watertight fit. Which means you get a durable, leak-free system that stands up to years of daily use. Our installers take great pride in leaving your home cleaner than we found it.
Now, you get to choose from a massive variety of styles, colors, and handy accessories. For instance, we can install sturdy grab bars that match your hardware perfectly. This gives you extra stability and peace of mind when the floor gets soapy.
Besides that, we offer built-in benches and corner shelves for your shampoo bottles. These smart additions keep your soap within arm's reach without cluttering up your floor space. You can basically design the exact setup that fits your daily routine.
In addition to the walls, you must decide how you want to enclose your new space. Some folks love the clean look of thick, frameless glass doors that slide open smoothly. Others prefer a simple curtain rod setup that allows for maximum entry space.
Whichever you choose, we ensure the threshold remains low and easy to step over. This attention to detail keeps your bathroom floor dry and safe. We will help you weigh the pros and cons of each door style during our visit.
Indeed, our team understands the unique housing styles found throughout Clay County, Minnesota. Whether you live in a classic mid-century home or a newer build, we know how to handle the local plumbing quirks. We always make sure our work complies with all local building codes and safety regulations.
Specifically, we serve families across various local zip codes, helping neighbors improve their daily lives. Our regional population enjoys a comfortable median household income, and investing in home improvements is a smart way to protect that wealth. We treat your home with the exact same respect we show to our own families.
Because we are local, we can head out to your place quickly to provide your free estimate. You do not have to deal with out-of-state call centers or sketchy subcontractors. We manage the entire project from start to finish with our own hands.
Naturally, we want to be completely upfront about what this remodeling project entails. While we love this upgrade, it might not be the perfect choice for absolutely every household. For example, if you have toddlers who still need a deep tub for bath time, keeping at least one basin in the house is smart.
However, if you have multiple bathrooms, swapping one out is a complete no-brainer. This change gives you the best of both worlds for resale value and convenience. On the downside, the demolition phase can be a bit noisy for a few hours.
But we promise the temporary noise is well worth the incredible result you get. Our clients always tell us they wish they had made the switch years earlier. We work fast to keep the disruption to your daily life as minimal as possible.
Sometimes, brave homeowners try to tackle this project themselves to save a few bucks. Although we admire that handy spirit, plumbing and waterproofing are incredibly tricky jobs. One tiny mistake behind the wall can cause thousands of dollars in hidden water damage over time.
Therefore, hiring our experienced crew saves you from massive headaches down the road. We have the specialized tools and the know-how to get the slopes and drains perfectly aligned. Plus, our professional work comes with a solid warranty for your peace of mind.
So, are you ready to take the next step toward a safer and more beautiful washroom? Getting in touch with us is incredibly easy and will not cost you a single penny. We will schedule a convenient time to come look at your current setup and discuss your ideas.
During this visit, we will answer all your questions and provide a detailed, written estimate. You can take all the time you need to think it over with zero obligation. Simply reach out to us today, and let us help you transform your home with a beautiful new walk-in setup!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote