Across Carroll County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, slippery ledge every single morning just to wash off. If so, you are definitely not alone because many homeowners in this beautiful region are choosing to swap out their old, deep soaking basins for modern, walk-in washing spaces. This smart home upgrade instantly opens up your layout and makes your daily routine a whole lot safer and quicker.
Fortunately, we specialize in removing those bulky, outdated basins and replacing them with beautiful, low-profile washing bays. This means you can finally stop worrying about slips and falls while enjoying a much more spacious setup. Since our team handles everything from demolition to the final plumbing connections, you get a stress-free remodel that adds real value to your property.
Now is the perfect time to transform your space, and you can get started by requesting a completely free estimate from our local team today. We love helping neighbors across the local area find the perfect setup for their daily needs. By choosing to update this area, you will instantly make your home look more modern and feel much more open.
First of all, safety is the biggest reason most folks decide to make this change. Standard basins have tall walls that require you to balance on one wet foot just to get inside, which is a major hazard for anyone. By replacing that old unit with a sleek, low-threshold entry, you eliminate a huge trip hazard and gain peace of mind.
In addition to safety, you will love how much easier the new setup is to keep clean. Those old, curved basins have a million crevices where soap scum and stubborn mildew love to hide. Our modern, flat-panel wall surrounds and non-porous bases wipe down in seconds, which saves you from painful scrubbing on your hands and knees.
On top of that, a modern walk-in option makes your entire room feel twice as big. Traditional deep basins take up massive physical and visual space, which makes smaller bathrooms feel cramped and dark. Once we install a bright, glass-enclosed walk-in space, the room instantly fills with light and feels like a luxury spa.
To help you compare the two options, we put together this quick comparison table based on what our customers usually notice after their upgrade:
| Feature | Old Basin Setup | New Walk-In Setup |
|---|---|---|
| Entry Height | High step (usually 14 to 18 inches) | Low step (typically 1 to 3 inches) |
| Cleaning Effort | High (lots of scrubbing in deep curves) | Low (easy wipe-down flat surfaces) |
| Visual Space | Cramped and bulky | Open, bright, and modern |
Naturally, you might worry that a major bathroom renovation will drag on for weeks and leave your home in a total mess. However, our experienced crew has refined this specific process down to a science, which means we often finish the job in just a couple of days. We start by carefully protecting your floors and walls before we even touch a single tool.
Next, we gently extract the heavy existing unit without damaging the surrounding drywall or structural framing. This step requires a lot of muscle and precision, but we handle all the heavy lifting and haul away the old debris for you. After that, we inspect the underlying subfloor and plumbing to ensure there is no hidden water damage or rot.
Once we know the foundation is rock solid, we install the new slip-resistant base and connect the drain lines. Then, we fit the gorgeous, waterproof wall panels and your choice of high-quality fixtures, like a rainfall showerhead or a handy handheld sprayer. Finally, we seal every single joint with premium, mold-resistant silicone to guarantee a leak-free space for years to come.
This project is your chance to design a space that fits your exact tastes and daily physical needs. For instance, you can choose beautiful wall surrounds that look exactly like expensive marble or classic subway tile without any of the high maintenance. These durable materials won't chip, fade, or harbor nasty mold in the grout lines.
Besides the walls, you can add custom features like built-in seating, sturdy grab bars, and recessed storage caddies for your shampoos. This lets you personalize your level of cozy relaxation and convenience, turning a simple daily chore into a truly pleasant experience. We offer a wide variety of hardware finishes, including brushed nickel, matte black, and classic chrome.
Which means you can easily match your new setup with the existing hardware in the rest of your home. Whether you prefer a sleek, modern look with frameless glass doors or a classic look with a stylish curtain rod, we have you covered. Our goal is to create a space that looks beautiful and functions perfectly for your household.
Living and working right here in Carroll County, Mississippi, gives us a deep appreciation for the homes in our community. We understand the local architecture, the common plumbing layouts in older homes, and the unique climate challenges of our state. Our team is proud to serve families across this historic area, helping them update their homes safely and affordably.
Whether your home is located near the leafy streets of Carrollton, down in Vaiden, or anywhere else in our peaceful county, we will come right to your door. We know that local homes often feature beautiful, classic designs that require a careful, respectful touch during remodeling. We treat your property with the same care and respect that we would show in our own parents' homes.
Because we are local, we can easily navigate the building codes and permit requirements of our region, saving you time and hassle. We also understand that folks around here value honest, hard work and straightforward pricing without any hidden fees. That is why we always provide clear, detailed estimates before we begin any work on your home.
Absolutely, because modern home buyers almost always prefer a spacious walk-in stall over an old, unused basin. Many families find that they never actually take baths anymore, so that giant tub is simply wasting valuable square footage. Removing it and installing a modern walk-in unit is one of the smartest ways to boost your home's appeal.
Moreover, this project is highly cost-effective compared to a full, down-to-the-studs bathroom remodel. Since we focus specifically on the wet area of your bathroom, you get a dramatic transformation without paying for a massive renovation. This lets you maximize your budget while still getting a space that feels brand new and luxurious.
Ultimately, the biggest return on investment is the daily comfort and safety you will experience right away. You cannot put a price tag on feeling secure in your own home and enjoying a beautiful, stress-free morning routine... which is why so many of our customers tell us they wish they had made the switch years ago!
Are you ready to stop struggling with that old, outdated basin and upgrade to a beautiful, modern walk-in space? Our friendly, local team is standing by to help you design the perfect solution for your home. We make the entire process easy, from your very first quick message to the final cleanup.
Contact us today to schedule your complimentary, no-obligation consultation right in the comfort of your home. We will measure your space, show you beautiful material samples, and provide a clear, honest quote for the work. Let us help you transform your bathroom into a safer, brighter, and much more functional space today!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote