Our Bunker Hill crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Dallam County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, slippery ledge every single morning just to wash off. Many homeowners share this exact frustration because traditional deep tubs simply do not fit a fast-paced lifestyle anymore. By swapping that outdated basin for an open, low-profile washing space, you instantly make your daily routine safer and much faster.
This smart upgrade transforms the entire feel of your room without requiring a full scale remodel. Our team comes right to your door to help plan this switch. We look at your current layout and give you a clear, honest estimate at zero cost to you.
Think about how much easier your life gets when you do not have to scrub those moldy, hard-to-reach corners of an old unused tub. Instead, you get a sleek, simple setup that keeps water exactly where it belongs. Let us help you upgrade your home with a fresh setup that actually fits how you live today.
Let us be real about how we actually use our bathrooms. Most of us rarely take long baths anymore because we just do not have the time. Keeping a giant, unused porcelain basin in your home wastes precious floor space that you could use for a much larger, open washing area.
This change brings a whole new level of safety to your household. Slipping on wet porcelain remains one of the most common ways people get hurt at home. Removing that high barrier drastically lowers the risk of trips and falls for everyone from young kids to grandparents.
On top of that, a modern walk-in setup looks incredibly sharp and clean. It opens up the visual flow of the room, making even a small bathroom feel twice as large. You get more physical room to move around, which means no more bumping your elbows against cold walls while trying to rinse your hair.
Stepping over a high tub wall when your feet are wet is always a bit sketchy. By installing a low-threshold entry, you eliminate that dangerous hurdle entirely. This simple modification allows you to step in and out naturally without losing your balance.
To make things even safer, we can add stylish grab bars and slip-resistant flooring during the process. These features do not have to look like a cold hospital room anymore. Modern fixtures blend beautifully with your style while keeping you completely secure on your feet.
Traditional tubs eat up a massive footprint in your bathroom layout. When we remove that bulky unit, we open up a world of design possibilities. You can choose to install a spacious enclosure with built-in seating or even custom shelving for your shampoos.
This extra breathing room makes your morning rush feel way less chaotic. You will not feel boxed in by heavy shower curtains or thick sliding glass doors anymore. Instead, you enjoy a bright, airy environment that starts your day off on a positive note.
You might wonder how we actually get this job done without turning your home into a total disaster zone. Honestly, we have got this down to a science. We start by carefully protecting your floors and hallway before we touch a single tool.
First, we demo the old tub and inspect the underlying wood and plumbing for any hidden water damage. This step is crucial because we want to make sure your subfloor is rock-solid before we build anything new. If we find any rot, we fix it right then and there so you do not have issues down the road.
After the prep work is complete, we run the new plumbing lines and secure your new base. We use high-quality materials that resist mold and mildew, ensuring your new setup stays pristine for years. Finally, we install the wall panels and fixtures, clean up every speck of dust, and leave you with a gorgeous new setup.
| Feature | Traditional Deep Tub | Modern Walk-In Setup |
|---|---|---|
| Entry Height | High step-over (14-18 inches) | Low-profile (1-3 inches) |
| Cleaning Effort | Hard scrubbing on hands and knees | Quick wipe down with mild soap |
| Floor Space | Bulky and restrictive | Open, spacious feel |
| Water Usage | High gallons per fill | Efficient flow rates |
Before you jump in, it is smart to think about which bathroom you are remodeling. Keeping at least one bathtub in a multi-bathroom home is usually a good idea for future resale value. However, if this is your primary master suite, making the switch is almost always a home run for your daily comfort.
You also want to consider the materials that best fit your budget and style. Acrylic surrounds offer an affordable, incredibly durable option that is a breeze to keep clean. On the other hand, custom tile work allows you to create a unique look, though it requires a bit more maintenance over time.
Our friendly team can walk you through all these choices during our initial visit. We do not use high-pressure sales tactics because we want you to feel totally confident in your decision. We just give you the facts, show you some cool options, and let you decide what works best.
The hardware you choose really defines your new washing experience. A rain showerhead offers a relaxing, spa-like feel that washes away the stress of a long day. Alternatively, hand-held sprayers add incredible flexibility for cleaning the walls or washing the family dog.
We also help you choose the right thermostatic valves to keep your water temperature steady. This technology prevents those annoying temperature shocks when someone else flushes a toilet in the house. You get a consistent, safe stream of warm water every single time you step inside.
The walls surrounding your new setup need to handle daily moisture without breaking a sweat. Non-porous materials are fantastic because they do not have grout lines where nasty mold loves to grow. This means you spend your weekends relaxing instead of scrubbing grout lines with an old toothbrush.
If you prefer the classic look of tile, we use premium sealants to protect your investment. We ensure every seam is completely watertight to protect your home from hidden leaks. Whichever style you choose, we guarantee a professional finish that stands up to heavy daily use.
Upgrading your bathroom is not just about making your life easier today. It is also a highly effective way to boost the overall market value of your property. Buyers absolutely love modern, clean bathrooms that do not require immediate work after they move in.
This is especially true in beautiful residential communities across the great state of Texas. For example, homeowners in Bunker Hill often look for ways to modernize their properties while maintaining high standards of quality. Whether you live in a quiet neighborhood in Dallam County or another local area, keeping your home updated is always a smart move.
While we do not need to worry about local median household income or specific ZIP codes, we know that people here appreciate solid craftsmanship. Our team takes pride in delivering top-notch results that match the beautiful homes in this region. We respect your time, your property, and your budget from start to finish.
Now is the perfect time to stop dreaming about a better bathroom and finally make it happen. You do not have to live with a cramped, outdated tub that no longer serves your needs. Our local team is ready to help you plan the perfect transition to a brighter, safer space.
We make the entire estimation process completely stress-free and straightforward. We will come out to your home, look at your existing layout, and listen to exactly what you want. After that, we provide a detailed, written estimate absolutely free of charge or obligation.
There is zero pressure to buy, just honest advice from friendly folks who know how to get the job done right. Take the first step toward a more functional, beautiful home today. Reach out to us to schedule your free consultation, and let us bring your vision to life!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Bunker Hill repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Dallam County; the statewide picture lives on Texas; the wider region is the South.
One three-day job stands between this bathroom and its best fixture.
Get my free quote