Our Brazil crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Clay County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of tripping over that high porcelain ledge every single morning. That old basin takes up way too much space and feels like a chore to scrub down. By replacing that bulky tub with a modern walk-in stall, you instantly create a safer and more spacious washroom.
This simple swap completely changes how you experience your daily routine. Suddenly, your space feels open and much easier to keep clean. Our local team comes right to your door in Clay County to help you plan this exciting project. We look at your layout and give you a complete, free estimate without any pressure.
Getting a layout that fits your lifestyle is actually much easier than you think. You do not have to live with an outdated setup that does not serve your needs. Let us explore how swapping your fixtures can bring fresh life into your home.
Think about how often you actually take a soaking bath these days. For most of us, a quick, refreshing wash is the real daily go-to. Removing the unused basin frees up valuable square footage, which makes your entire room feel twice as large.
This change also removes a major tripping hazard from your home. Stepping over a wet, slippery wall is a recipe for a nasty fall. By choosing a low-profile base instead, you gain effortless entry and peace of mind. On top of that, your new setup will require far less scrubbing since modern acrylic wall surrounds resist grime.
Here is a quick look at how these two setups compare for daily life:
| Feature | Old Basin Setup | New Walk-In Setup |
|---|---|---|
| Step-In Height | Usually 14 to 18 inches | Only 1 to 3 inches |
| Cleaning Effort | High (grout and deep corners) | Low (smooth, non-porous surfaces) |
| Space Utilization | Cramped and bulky | Open and airy feeling |
Making this switch is a smart investment for your property. It keeps your home modern and appeals to future buyers who prefer quick utility over high-maintenance fixtures. Our team loves helping folks find the perfect balance of style and safety.
First, we sit down with you to choose the perfect materials and colors. You can select beautiful stone-look panels or sleek, minimalist walls that never require sealing. This lets you match your existing decor perfectly while keeping maintenance to an absolute minimum.
After that, we talk about handy accessories like built-in seating, grab bars, and recessed shelving. Having these features integrated from the start means you get a highly functional space tailored just for you. You will love having your shampoos and soaps organized right at arm's reach.
Once your custom materials arrive, our skilled installers get to work protecting your floors. We carefully extract the old heavy cast iron or steel fixture without damaging your surrounding walls. This careful demolition phase ensures that your plumbing lines remain perfectly intact.
Then, we run new drain connections and secure your heavy-duty, slip-resistant base. Because we specialize in this exact transition, we often complete the entire transformation in just a couple of days. You won't have to deal with weeks of construction mess or endless dust.
Living in a lovely community of about 8,288 people means we value practical, long-lasting home improvements. With a local median household income of $37,992, every dollar you spend on your property needs to stretch far and add real value. Upgrading your washroom is one of the most reliable ways to boost your home equity.
Whether you reside near the historic brick historic district or out in the quieter parts of the 47834 area, we treat your home with total respect. We know the local water conditions and building styles unique to this part of Indiana. This local familiarity helps us choose the best plumbing connections for a leak-free future.
We pride ourselves on offering honest, transparent pricing for every single neighbor. You will never have to worry about hidden fees or surprise costs when you work with us. We believe in doing solid work that stands the test of time.
Actually, most modern home buyers prefer a spacious walk-in setup over a dusty old tub they will never use. Unless your home is the only one in the neighborhood without a single bath, this upgrade is highly sought after. It makes your home stand out in the local real estate market.
If you have at least one other full bath in the house, making this change is a no-brainer. It maximizes your daily utility while keeping your home highly competitive. You get to enjoy the ease of use now, and reap the financial benefits later.
Usually, we can complete the demolition, plumbing prep, and final wall installation in just two to three days. We know that being without your main bathroom is a major hassle, so we work quickly and cleanly. Our team arrives on time and stays focused until the job is done.
This rapid turnaround is possible because we pre-measure everything perfectly before we even touch a wrench. We arrive with all the right tools and materials ready to go. You will be using your brand-new, easy-access wash space before you know it.
Now is the perfect time to stop struggling with an outdated, high-walled basin. You deserve a beautiful, open space that makes your morning routine a total breeze. Our friendly local team is ready to visit your home and discuss all your design ideas.
We offer completely free, no-obligation estimates so you can explore your options without any stress. We will walk you through the entire process, help you select the best materials, and give you an exact price. This upfront clarity helps you make the best decision for your family budget.
Reach out to us today to schedule your free home visit in Brazil, Indiana (IN), USA. Let us help you transform your old bathroom into a safe, gorgeous, and highly functional space that you will love using every single day!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Brazil repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Clay County; the statewide picture lives on Indiana; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote