Bathtub To Shower Conversion

Bathtub To Shower Conversion in Belmont, Mississippi (MS)

Our Belmont crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Tishomingo County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
2,073
County
Tishomingo County
State
Mississippi
Region
South
Median income
$37,045
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

If you feel tired of stepping over that high, slippery ledge every single morning just to wash off, you are certainly not the only one. Many folks right here in Tishomingo County face this exact struggle daily. Happily, you can transform that outdated, bulky washing basin into a sleek, walk-in washing space that fits your lifestyle much better.

Why Swapping Your Old Tub Makes Total Sense

For starters, this smart upgrade instantly opens up your entire washroom. When you replace that deep, unused basin with a modern walk-in base, you create a spacious area that feels much larger. This means you no longer have to squeeze into a cramped corner just to get clean.

On top of that, safety becomes a non-issue almost overnight. Because the threshold of a modern walk-in base is so low, you drastically lower your chances of slipping or tripping while entering. Which means you can wash with total peace of mind every single day.

Naturally, cleaning becomes a whole lot easier too. Modern acrylic surrounds and solid composite walls lack those annoying grout lines that collect mold. Consequently, you will spend your weekends relaxing instead of scrubbing tile joints with an old toothbrush.

What to Expect During the Transformation Process

First, we need to look at your existing plumbing layout. Since the old drain sits in a specific spot, our team must align the new, wider basin drain correctly. This ensures your wastewater flows away quickly without any annoying backups.

After resolving the plumbing, we install tough, waterproof backing boards. This step is super critical because it prevents moisture from rotting your wooden wall studs. Thanks to this protective layer, your home stays safe from hidden water damage for decades.

Finally, you get to choose the gorgeous wall panels and fixtures. Whether you prefer a classic stone look or a crisp modern style, we customize everything to match your taste. Indeed, your washroom will look like a high-end spa once we finish the job.

Feature Old Deep Basin Setup New Walk-In Setup
Step-in Height Usually 14 to 18 inches Often under 3 inches
Cleaning Time High maintenance (grout scrubbing) Low maintenance (wipe and go)
Visual Space Cramped and bulky Open and airy

Tailoring the Space to Your Daily Needs

To make your new setup even better, we can add built-in seating. If you enjoy a relaxing wash or need to rest your legs, a sturdy fold-down bench provides incredible utility. This lets you unwind completely without feeling rushed.

Additionally, we can install strategically placed grab bars that blend beautifully with your hardware. Far from looking like a sterile hospital room, these stylish accessories offer solid support whenever you need a little extra balance. This means you maintain your independence safely.

To store your soaps and shampoos, we often build recessed niches directly into the wall panels. Instead of cluttering your floor with plastic organizers, you keep all your bottles organized and within arm's reach. Your space remains tidy and organized with minimal effort.

Local Expertise for Our Unique Community

Living in a charming town of about 2,073 residents means we value neighborly trust and honest work. We understand the specific home styles found around the 38827 ZIP code area. Because of this local knowledge, we handle older plumbing systems with great care and precision.

With a median household income of $37,045 in this part of Mississippi, we know that home investments must be smart and budget-friendly. Therefore, we focus on durable materials that offer the absolute best value for your hard-earned money. You get a gorgeous result without breaking the bank.

Moreover, our team respects your home and your busy schedule. We work fast and clean up thoroughly so you can get back to your normal routine. You will hardly even know we were there, except for your stunning new washroom.

How We Avoid Common Installation Pitfalls

Sometimes, DIY enthusiasts try to tackle this project alone and end up with major leaks. Because sealing a walk-in pan requires precise leveling, a tiny mistake can ruin your subfloor. Our professional installers prevent these costly headaches by testing every seal before we leave.

Another issue involves matching the new drain size to your existing pipe network. Since standard basins use a smaller drain pipe than modern walk-in bases, we often upgrade the pipe size during the swap. This prevents soap scum and hair from clogging your lines down the road.

By trusting local hands, you also avoid permit confusion. We know the local building codes inside and out, which keeps your project fully compliant. This protection ensures your home value remains solid if you ever decide to sell.

Your Path to a Stress-Free Upgrade

If you are ready to ditch that old, unused basin, the journey starts with a simple conversation. We visit your home to inspect your current layout and discuss your design goals. This initial visit helps us understand exactly what you want.

During this visit, we provide a detailed, itemized plan for your review. This transparency ensures you know exactly where every dollar goes, with no hidden surprises later. You remain in complete control of the project from start to finish.

To make things even easier, we offer a completely free cost estimate. This allows you to explore your options without any pressure or financial obligation. Simply reach out to us today, and we will handle the rest of the hard work for you!

Why the tub goes in Belmont

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Belmont

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Belmont

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Belmont

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Belmont

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Belmont repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Belmont

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Belmont in short

StandingIncorporated place
Population2,073
ZIP codes38827
Land area4.7 sq mi
Density438 per sq mi
Median income$37,045

For the bigger map: county seat pages start at Tishomingo County; the statewide picture lives on Mississippi; the wider region is the South; background reading sits on Wikipedia.

Bathrooms we convert around Belmont

Conversions booked across Mississippi

One three-day job stands between this bathroom and its best fixture.

Get my free quote