Across Bannock County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Updating your tired old basin into a sleek walk-in stall changes everything. You gain massive amounts of floor space while making your daily routine much smoother.
Getting rid of those high walls that trip you up creates a much safer environment for your household. This simple change adds real value to your home in Bannock County, Idaho.
Deciding to remove that bulky porcelain beast is a brave move for any homeowner. You stop fighting with a slippery ledge and start enjoying a spacious area designed for quick morning starts.
This process involves tearing out the old unit and preparing the subfloor for a fresh pan. Which means you get a waterproof base that stays solid for many years to come.
Most folks realize that deep tubs just collect dust and laundry. You probably use the shower function ninety-nine percent of the time anyway.
By reclaiming that footprint, you create a wide opening that feels much more open and light. This extra room makes your morning routine feel like a breeze rather than a chore.
When you strip back the walls, you see exactly what is happening behind the scenes. This gives us the perfect chance to check for any hidden leaks or rot in your studs.
Fixing these small issues now prevents big headaches down the road. You receive a sturdy structure that will hold up under heavy daily usage without any wobbling or cracking.
Living in this part of the Gem State means you appreciate solid craftsmanship. People around here value honesty and hard work above fancy marketing tricks.
Since the median household income varies, you want a solution that fits your budget perfectly. You deserve high quality work that does not break the bank but still looks fantastic.
| Feature of the Upgrade | Benefit for Your Daily Routine | |
|---|---|---|
| Low barrier entry | Stepping in becomes safe and easy | |
| Glass enclosure | Keeps the water inside while looking nice | |
| Non-slip flooring | Prevents accidents during your morning rinse | |
| Built-in shelving | Keeps all your bottles organized and handy |
Think about where the water hits the wall and how the door swings open. You want enough room to move your arms around without hitting cold tile surfaces.
Designing this area with care makes your life much better. A well-planned layout ensures that everything you need sits right within your arm reach.
Choosing the right wall panels or tile matters more than you might think. Some materials resist mildew buildup while others require constant scrubbing to stay looking nice.
You should aim for low maintenance surfaces that wipe clean with a soft cloth. This lets you spend more time relaxing and less time cleaning your bathroom floors.
Starting the work begins with a professional look at your plumbing lines. We need to ensure the drain handles the volume of water moving through the pipes.
This prevents any backing up or flooding when you turn the handle. You get a reliable system that works exactly when you need it to work.
Dust happens during any renovation, but we always try to keep the mess contained. You stay in your home while we do the heavy lifting on the plumbing side.
We protect your floors and keep the construction debris away from your main living areas. This makes the whole experience much easier for your family to handle.
Once we finish the installation, we run the water to check every single seal. You can feel certain that the moisture stays where it belongs.
Quality work means you never worry about water dripping into the drywall. You receive a finished product that operates smoothly from the very first use.
Home buyers love seeing a modern walk-in area instead of a clunky plastic shell. This upgrade signals that you took care of the home with intentional updates.
It makes your house stand out in a crowded market whenever you decide to move. You see a clear return on your investment through faster interest from potential buyers.
You can add grab bars for extra safety or a bench for sitting down. These little touches make your shower feel more like a restful retreat.
Even simple additions like a rainfall head change your perspective entirely. You transform a mundane task into a nice moment of calm during your busy day.
Not every bathroom has the same shape or dimensions inside. We measure everything twice to make sure the custom pan sits flush against the walls.
This attention to detail prevents any gaps where water might sneak behind the tiles. You enjoy a seamless finish that looks like it always belonged in that corner.
Now that you have all the facts, you might feel ready to start. The best way to move forward involves getting a clear picture of the costs involved.
Requesting a free estimate lets you see exactly how this change works for your unique floor plan. You gain clarity without any pressure to sign anything immediately.
Dealing with a contractor who knows the local building codes keeps things simple. You avoid the red tape that often slows down bigger projects in other regions.
We know the supply chains in your area and how to get the best parts quickly. This means you do not wait weeks for shipping on simple items.
Imagine yourself waking up and stepping into a beautiful new stall. No more climbing over high porcelain walls or worrying about slick surfaces.
You deserve a space that reflects your personality and your lifestyle. Simply reach out for a free quote to start your journey toward a much better home experience today.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote