Our Allenhurst crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Liberty County within days.
Written quote at no cost, one callback, no chasing afterwards.
You probably want to get rid of that bulky, high-sided basin that eats up all your floor space. Making the change to a sleek, walk-in washing area is the best way to open up your home in the heart of Liberty County.
Because life moves fast, you need a setup that allows you to jump in and out without fighting over an awkward edge. Getting rid of that old relic creates a feeling of total relaxation while making your daily routine way smoother.
Many folks living around the 31301 zip code area realize that they never actually use their massive, deep tubs for anything other than storing dirty laundry. By switching to a low-profile stall, you gain valuable square footage that makes your bathroom feel much bigger than it really is.
Furthermore, this change helps you avoid those nasty slips and falls that happen when you try to climb over a tall wall. Having a flat entry floor provides you with true physical ease, and you will notice the difference the very first time you use your new stall.
Since our little town has around 915 people, you know that keeping your property value up is just common sense. When you upgrade your plumbing fixtures, potential buyers look at your home with much more interest if they see a clean, modern design.
Even if you are not planning to move anytime soon, the visual appeal of a custom-tiled stall is undeniable. It gives your home a sense of refinement that makes you proud to show off your space to visitors who come over for dinner.
| Feature | Benefit |
|---|---|
| Low-threshold entry | Prevents tripping and makes cleaning simple |
| Glass enclosure | Adds brightness and lets natural light flow |
| Non-slip surface | Protects you and your family from accidents |
| Built-in bench | Gives you a place to sit during long rinses |
First off, you have to find someone who actually knows how to handle the heavy plumbing work required for this job. Trying to do this yourself is a recipe for a flooded floor and a massive headache that you really do not need in your life.
Once the old, heavy shell is pulled out, the walls behind it usually need some serious attention to prevent any future moisture issues. Getting those studs checked for rot is vital because you want your new setup to last for decades without needing repairs.
After that, the drain location might need a little adjustment so that your new water system works properly. This step ensures that your water flows away quickly, which stops those puddles from forming around your feet while you wash your hair.
Because the moisture levels in a bathroom are always high, picking the right tile or stone finish is a big deal. You want something that looks good but also handles water without turning into a slippery skating rink or growing mold.
On top of that, you should think about adding some niches for your soaps and shampoos so they do not clutter up your floor space. Organizing your supplies in a recessed wall area makes your morning routine much more efficient and keeps everything within arm's reach.
Also, consider installing a high-quality shower head that gives you the exact pressure you enjoy every single day. A good sprayer turns a boring chore into a tiny vacation that happens inside your own house every morning.
With a median household income of $55,833 in this area, you likely want to make sure every dollar you spend is worth it. Investing in a professional bathroom refresh is one of the smartest ways to boost the longevity of your home.
You will find that modern, efficient plumbing uses less water, which might save you a few bucks on your monthly utility bills. That is a nice bonus that adds up over time, especially if you have a busy house with lots of people coming and going.
If you are curious about what this might cost, you should ask for a free estimate from someone who does this work locally. Seeing the numbers written down on paper takes the mystery out of the project and helps you set a realistic budget.
One major error is rushing into a design choice without thinking about how it fits with the rest of your home. You want the style of your new stall to match the rest of the bathroom so it does not look like a random addition.
Another mistake is forgetting about ventilation, which is super important in our humid climate. If you do not have a strong fan to pull the steam out, your walls will eventually pay the price with paint peeling and nasty mildew.
Moreover, avoid picking cheap materials that look good for a month but start falling apart after a few seasons of heavy use. Investing in quality hardware now saves you from having to replace leaking faucets or cracked tiles in just a few years.
If you plan on staying in your home for a long time, planning for the future is a smart move. Adding features like grab bars or a wider opening makes your bathroom usable for everyone, no matter their age or physical ability.
You get a sense of peace knowing that your space is built to handle whatever life throws at you as the years roll by. Creating a setup that is both beautiful and functional is the best way to ensure your home stays a happy place for your family.
Everything you need to do to get started is just one quick reach out away. By getting a professional evaluation, you learn exactly what is possible within the footprint of your existing bathroom, which helps you avoid costly surprises.
Do not be afraid to ask questions about how the plumbing will be rerouted or how long the whole mess will take. A real pro will explain things in plain English so you feel totally confident in the plan before anyone touches your walls.
Finally, think about the specific colors and textures that make you feel happy when you walk into the room. Whether you want a dark, moody stone finish or a bright, white tile, the choice is yours to make, and it should reflect your personality.
You are ready to leave the old, outdated basin behind and step into a new way of living. It is time to stop dreaming about a better bathroom and start making it happen with the help of someone who has the right tools for the task.
Go ahead and request a free estimate to see how easy this transition can be for your house. You deserve to walk into a space that feels fresh, clean, and perfectly suited to your needs every single day of the week.
There is nothing holding you back from making your home the best it can possibly be right now. Grab this opportunity to upgrade your daily habits and improve the overall atmosphere of your living environment with a simple, smart change.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Allenhurst repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Liberty County; the statewide picture lives on Georgia; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote